StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Regulatory Framework of Fire Engineering Affects Engineering and Construction Essay
7 pages (1897 words) , Download 0 , Essay
Free
This law is a combination of several laws including environmental law, land law, health and safety, intellectual property law, tort, contract law, employment law, planning law, and commercial law (Boswell & Walker, 2004). Construction law affects several players in the construction sector including planners, construction workers, engineers, builders, etc.
Preview sample
Advanced Technology: Planning & Production Engineering and Construction Essay
7 pages (1975 words) , Download 0 , Essay
Free
Reclamation of land and making it to be of good use requires the usage of suitable fill material made from high quality. This can provide reasonable haulage distance. To improve the fill masses of the required land, ground improvement is necessary since it is affordable and allows room for improvement (Chudley, et al, 2011, 76).
Preview sample
sponsored ads
Hire a pro to write
a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Fire Engineering Solution Review Engineering and Construction Assignment
12 pages (3095 words) , Download 0 , Assignment
Free
The British have done so by establishing an array of standardized regulations and building regulations that must be adhered to by all architects and engineers. Some of these are covered in the Approved Document (ADB) B 2013. One of the most important things that the document covers is the prevention of fire spreading from one building to another.
Preview sample
Dynamic Inventory Lot Size Engineering and Construction Assignment
18 pages (4739 words) , Download 0 , Assignment
Free
Lot size, on the other hand, refers to terms of decisions that pertain to inventory levels, the cost of setup or ordering, capacity requirement, and availability (Yilmaz, 1982). Such decisions are impacted by the cost of set up, and the cost of carrying an item inventory. There are many reasons why a lot of sizing is needed. These reasons are either business or production specific.
Preview sample
Materials, Tribology and Surface Engineering Engineering and Construction Math Problem
6 pages (1472 words) , Download 1 , Math Problem
Free
Materials, Tribology and Surface Engineering AssignmentQuestion One(a). Brass (CW614N - CZ121) has a Young’s modulus of 97GPa and a Poisson’s ratio of 0.34.Calculate the effective modulus at the interface when two brass plates are loaded together.
Preview sample
Projects Dealing with Flooding and Erosion Engineering and Construction Assignment
9 pages (2653 words) , Download 0 , Assignment
Free
The Pevensey Bay Sea Defence scheme can be described as a unique project based on the fact that it is the first project that involves Public Private Partnership. The partnership between the Environment Agency and Pevensey Coastal Defence Ltd is an effective approach to dealing with the problem of erosion and flooding from the sea.
Preview sample
Matlab SimMechanics: Double Mass Spring Damper Engineering and Construction Essay
3 pages (1043 words) , Download 1 , Essay
Free
The paper has studied the effects of increasing weight on the suspension system. The relationship is that when there are changes in weight,  there are corresponding changes in the force. This means that one can use the force response function to estimate the mass response function of the system since both experience changes when one changes.
Preview sample
Fire and the Built Environment Engineering and Construction Assignment
9 pages (2472 words) , Download 0 , Assignment
Free
According to Beverly et al. (2010, p.299), the built environment is utilized to describe areas with human-made structures and buildings. Fire safety can only be achieved in the built environment through contributions from numerous organizations. Therefore, a fire strategy is developed in the design stage by professional designers like engineers.
Preview sample
The Importance of Constructed Wetlands in the Process of Mine Pollution Amelioration Engineering and Construction Term Paper
13 pages (3761 words) , Download 0 , Term Paper
Free
Constructed wetlands, which are an imitation of natural wetlands, in terms of their design have been found to be critical in the amelioration of AMD. Despite the outstanding benefits associated with constructed wetlands, there are concerns regarding metal accumulation of sediments and the uptake of this poisonous material by plants.
Preview sample
Railway Project in Zambia Engineering and Construction Assignment
12 pages (3358 words) , Download 2 , Assignment
Free
The availability of the land for the project is usually a major concern. Other concerns include human-induced ones like culture, security, and the perception of the general public. Natural factors like temperature variation, land topography, and intensity of rainfall can also significantly affect the success of a project.
Preview sample
Importance of Plato for Plumbers Engineering and Construction Assignment
8 pages (2080 words) , Download 0 , Assignment
Free
As players in the tech industry understand more about moral decision-making and human values, they will become more important in their development. Some of the concepts that were previously confined to Philosophy students will become integral in the day-to-day running of these Silicon Valley companies. It may even one day become a major facet of the sector in its own right.
Preview sample
Developing Risk Assessment Plans Engineering and Construction Term Paper
8 pages (2000 words) , Download 0 , Term Paper
Free
The report has obtained that hazards and risks during construction of the three bedroomed detached houses in Berkshire shall require adherence to health and safety regulations.  The various UK legislations discussed shall compel contractors to take action to reduce or prevent the exposure to noise that emanates the risks (Chudley & Greeno, 2013).
Preview sample
Health Hazards Faced in the Process of Faade Retention and General Construction Processes Engineering and Construction Literature review
8 pages (2361 words) , Download 0 , Literature review
Free
Ladders and stairways are another leading health hazard, which is responsible for a large number of construction site injuries. Construction ladders are sometimes erected to a very great height for example in construction of skyscrapers .Any wrong move made on these ladders can lead to severe injuries or even instant death
Preview sample
Electromagnetic Effects in the Vicinity of an Active Wind Farms Engineering and Construction Coursework
10 pages (2886 words) , Download 1 , Coursework
Free
Particular focus has been put on issues such as shadow flicker, noise, and electromagnetic effects of wind farms. Studies such as Nomura et al. (2005) developed a summary of opinions based on independent reviews and compiled evidence-based findings to ascertain the extent to which wind farms have become problems for people.
Preview sample
Business Analysis of RQM Technologies Engineering and Construction Assignment
8 pages (2075 words) , Download 0 , Assignment
Free
It seeks to build up and thereafter distribute the such product as personal locator devices. The development of the product will first be sub-contracted and thereafter; conducted in-house manufacturing as the company focuses on the development of supporting software and systems. The market is diversified enough to include family-based consumption.
Preview sample
Road Pavement Design Engineering and Construction Assignment
9 pages (2244 words) , Download 0 , Assignment
Free
The start of the road was coordinated at and was designed to be at  Doherty’s Road. The end of the road coordinated at and was designed to meet Cobbledicks Ford Road at. The proposed road alignment. The start of the road was coordinated at and was designed to be at Doherty’s Road. The end of the road coordinated at and was designed to meet Cobbledicks Ford Road.
Preview sample
Alternative Form of Investment: Ecotourism Engineering and Construction Assignment
5 pages (1742 words) , Download 0 , Assignment
Free
It is important to ensure the cost of the investment should be less than 9% because of more than this percentage; the project does not make economic sense. The benefits of supporting ecotourism on the Island include the creation of employment opportunities, championing economic multiplier effects, and advancing the roles and responsibilities of government.
Preview sample
Melbourne Convention Center Engineering and Construction Assignment
19 pages (4979 words) , Download 0 , Assignment
Free
Some of the green approach attributes discussed under this article include the sustainability of resource use, waste disposal of the structure, location of the structure, production of food and beverage of the building, efficient use as well as the lighting system adopted by the management. This paper, therefore, rated this building a compliant with the green building requirements and standards.
Preview sample
Single-Phase Transformers Engineering and Construction Assignment
3 pages (1051 words) , Download 0 , Assignment
Free
A transformer is an electrical component that carries electrical energy between two electrical circuits using electromagnetic induction. The major use of transformers in engineering fields is to reduce or increase the voltages in electric power applications. This process is commonly referred to as stepping up or stepping down the voltages.
Preview sample
Inventory Lot Sizing Issues Engineering and Construction Assignment
11 pages (3597 words) , Download 0 , Assignment
Free
Previous studies that attempted to contextualize inventory lot sizing within supply chain management included Nia, Far, and Niaki (2014) who called for the need to bring together different facets of distribution facilities and options that can help productivities to obtain materials and undertake processing into the final product.
Preview sample
The Benefits of V- Formation Flying for Commercial Aviation Engineering and Construction Literature review
7 pages (2017 words) , Download 1 , Literature review
Free
These gains of V-formation flight make it a lucrative idea for every instance where flight effectiveness is needed. Commercial airlines are currently trying to identify means of organizing aircraft to trail in V-formation as they move across the world. The cost of energy or fuel saved by the reduction in drag force alone is multiple.
Preview sample
Recovery of PHB from Bacterial Cell Matter Engineering and Construction Assignment
24 pages (6488 words) , Assignment
Nobody downloaded yet
The centrifuge is designed with an inflow rate of 0.77m3/hr. of PHB at a speed of 6000 RPM and a maximum g-force of 10000g. The diameter of the bowl is determined as 0.5m and the length as 4.0 m. This works by conveying the solid-filled sediment towards one end of the drum by a shaft rotating at a relative speed to that of the bowl, and the clarified liquid is conveyed towards the opposite end.
Preview sample
Flood Management Strategies in Melbourne Engineering and Construction Assignment
50 pages (13084 words) , Assignment
Nobody downloaded yet
The study aims to analyze the flood management strategy in Melbourne with consideration of six city councils. These city councils are Manningham, Frankston, Cardinia Shire, Casey, Hobsons Bay, and Hume. The study also aims to consider the structural and non-structural strategies used in the Melbourne area.
Preview sample
Site Investigation and Pavement Design Engineering and Construction Assignment
6 pages (1690 words) , Download 0 , Assignment
Free
The materials collected for use in the construction of the road are sampled and all relevant laboratory tests are carried out to determine their suitability at handling the loads the new pavement will exert upon them after construction and commissioning. If the selected materials are not sufficient, it is required to find other alternative materials that can be used in the construction.
Preview sample
Analysis Construction of Balsa Wood Bridge Engineering and Construction Report
6 pages (1565 words) , Download 0 , Report
Free
The team also acknowledges that the bridge could be reinforced further by applying much stronger glue, and possibly building a newer bridge prototype. In the recommendations section, the team presented two recommendations. The first included constructing a truss design on the top and bottom of the bridge, rather than on the horizontal.
Preview sample
Data Exploration and Processing Engineering and Construction Assignment
7 pages (1982 words) , Download 0 , Assignment
Free
That is why it is often necessary to perform a variety of pre-processing activities to provide the best dataset before it is used for such modeling. Some of the pre-processing techniques that can be employed when handling any given data set include discretization, binning, linearization, and normalization (Kamiran & Calders, 2012).
Preview sample
Concrete Shear Walls Engineering and Construction Assignment
6 pages (1617 words) , Download 0 , Assignment
Free
Prior to the introduction of concrete shear walls, masonry structures were designed using empirical procedures based on the past performance of similar structures. Because the shear wall technique was not being used, early concrete structures used to be massive so as to effectively withstand vertical as well as lateral loads.
Preview sample
Asta Risk Management Engineering and Construction Essay
9 pages (2439 words) , Download 0 , Essay
Free
Some of the tasks undertaken in the external work will include the excavation and laying of pipes for water supply, drainage, and sewers for the three zones, simultaneously. The completion of work, together, throughout the entire site, will be facilitated by the availability of labor, construction materials, machinery, and working space on the site.
Preview sample
Fire Fighting Tactics and Evidence Preservation Engineering and Construction Essay
7 pages (2028 words) , Download 0 , Essay
Free
There are various causes of fire in the world faulty electricity, poor wiring, poor storage of combustible materials, and keeping chemically reactive together just to mention a few. Conversely, causes of fire vary from setting that is causes of fire in a house kitchen are diverse from the causes of fire in another setting like a courtroom.
Preview sample
URGENTProject Management Engineering and Construction Coursework
6 pages (975 words) , Coursework
Nobody downloaded yet
Introduction The four bridge abutments will be built in for the bridge and from exaction to filling up. The project will feature all the modern and ecological facilities and will ensure all the necessary utilities and appropriate connections. The
Preview sample
The Problems Associated with Marine Shrimp Farming in Bangladesh Engineering and Construction Essay
7 pages (1938 words) , Download 0 , Essay
Free
In the Eastern Hemisphere, Vietnam, Indonesia, Vietnam, Thailand, China, and India are the Shrimp farming leaders whereas countries such as Taiwan, Bangladesh, Australia Sri Lanka, and Myanmar are the current leaders since they possess larger industries. In the Western Hemisphere, Ecuador, Brazil, Guatemala, Venezuela, Panama, and Belize are the leading Shrimp producers.
Preview sample
Marine Shrimp Farming in Bangladesh Engineering and Construction Essay
6 pages (1652 words) , Download 0 , Essay
Free
Since the mid-1980s, shrimp farming has been a major contributor to the country’s economy. Moreover, shrimp farming provides several opportunities to the ever-growing population and employment and contributes more than US$445 million per year. It faces several challenges associated with environmental degradation and social impacts that bar the development of the shrimp farming sector.
Preview sample
Digital System Design - Electronic Engineering Engineering and Construction Math Problem
5 pages (1405 words) , Download 0 , Math Problem
Free
Requirement specificationThis is a design of an arcade video game designed by CAD software called multisim that is used to create a schematic circuit that is added components needed in the circuit. Including resistors and DC needed in the circuit.
Preview sample
Electrical Power Engineering and Construction Assignment
7 pages (3188 words) , Assignment
Nobody downloaded yet
Literature Search: Wafer Yield Maximisation in Semiconductor Chips ProductionIntroductionThe process of creating semiconductor integrated circuits usually involves some intricate trade-offs to attain a balanced and uniform coating around the chips.
Preview sample
The Various Activities of Sustainability Victoria Engineering and Construction Assignment
10 pages (2586 words) , Download 0 , Assignment
Free
The 2012-2015 strategic plans and the 2015-2020 strategic plans will be analyzed to show the points of achievement as well as the areas that Sustainability Victoria is working on. There is a need to understand the various waste management practices; therefore ensuring that the increase in population does not result in environmental degradation.
Preview sample
Application of the UK Fire Safety Engineering Engineering and Construction Assignment
11 pages (3109 words) , Download 0 , Assignment
Free
The management of fire and safety within buildings is an important process. In the UK, the government provides standards that are applicable in the design of new buildings and material alterations to existing buildings. These standards are intended to safeguard the occupants of a building from injuries in the event of a fire and hopefully assist firefighters in accessing the building.
Preview sample
Estimation of Available Safe Escape Time Engineering and Construction Assignment
5 pages (1529 words) , Download 0 , Assignment
Free
ASET is the time that elapses from the time the fire ignites to the time that untenable conditions due to the presence of smoke, heat, and toxic gases are reached. The occupants should be able to evacuate before untenable conditions are reached, as the conditions are intolerable. Exposure to such conditions can cause disorientation, incapacitation, or death. 
Preview sample
Available and Required Safe Egress Time Engineering and Construction Assignment
5 pages (1469 words) , Download 0 , Assignment
Free
The objective of ASET is to evacuate all the occupants to a safe place before the harmful condition is attained (CIBSE, 2010). The rate of fire spread depends on the type and the amount of materials used in the construction, the height of the ceiling, the building geometry, the physical barriers along the escape routes, and smoke ventilation systems.
Preview sample
Fire Resistance Design Engineering and Construction Assignment
7 pages (4114 words) , Download 0 , Assignment
Free
The main products that are tested for resistance include; walls( including both the bearing and non-bearing ones), hardware, doors, floor, ceiling, furniture, house finishes, partitions in rooms, door frames, beams, windows, panels, and any other component that will be considered vital in fire resistance in the building.
Preview sample
Fire Models and Design Engineering and Construction Assignment
6 pages (1763 words) , Download 0 , Assignment
Free
BS 476: part 20 of 1987 defined fire testing as the capability of a constituent of a building developed to withstand exposure to a given standard temperature, pressure, and time regime with minimal loss of its fire separating its main function or load bearing function or both for a given time period.
Preview sample
How Distance, Pressure, and Speed Influence Thickness of Uniform Coating Engineering and Construction Assignment
7 pages (1915 words) , Download 0 , Assignment
Free
Semiconductors (chips) are produced on a wafer that contains hundreds of chips. The wafer yield is defined to be the proportion of these chips that are acceptable for use and clearly, control engineers aim to maximize this yield during manufacturing. This yield is greatest when the thickness of the coating material to the wafer is uniform. 
Preview sample
Building Design for Means of Escape Engineering and Construction Assignment
21 pages (5480 words) , Assignment
Nobody downloaded yet
Various means of escape like escape routes as well as final exit doors must be designed by applying the requirements of the UK Fire Safety Engineering Design requirements. Various documents have been developed to guide building engineers on how to apply the UK Fire Safety Engineering Design Guidance in the means of escape from an apartment building.
Preview sample
Controlling Wafer Yield Engineering and Construction Assignment
5 pages (1 words) , Download 0 , Assignment
Free
Semiconductors (chips) are produced on wafers that contain hundreds of chips. The wafer yield is defined to be the proportion of these chips that are acceptable for use and clearly, control engineers aim to maximize this yield during manufacturing. This yield is greatest when the thickness of the coating material to the wafer is uniform. 
Preview sample
Operation Management Engineering and Construction Math Problem
6 pages (1558 words) , Download 0 , Math Problem
Free
Question 1a)Calculate the labour productivity (in £ per hour) and multifactorproductivity ratio (of output value to input value) for a month’smanufacture.Answer: i). X is the number of workers in the factory 160/30=5.3 hrs is the average hours per
Preview sample
Significance of Operations Management Engineering and Construction Math Problem
8 pages (2034 words) , Download 0 , Math Problem
Free
If the management decides to improve production efficiencies to 85%, then the multifactor productivity will increase by (1.24 -1.17)/1.17 = 5.98% increase. And lastly, if the management decides to reduce the labor cost by 10% then the multifactor productivity will increase by (1.29-1.17)/1.17 = 10.26%.
Preview sample
Rt f rivt Nuisn, th rim f ubli Nuisn nd Sttutry Nuisns in nglnd nd Wls Engineering and Construction Essay
12 pages (3102 words) , Download 0 , Essay
Free
A private nuisance affects a single individual, whilst a public nuisance affects several people. Instances of private nuisance and public nuisance are the erection of a wall that deprives a neighbor’s house of illumination and conducting a disorderly house, respectively. On occasion, a person subjected to a private nuisance may abate it.
Preview sample
Material Technical Report which the Findings of Concrete Tests Done with Samples Cast Using PFA Engineering and Construction Math Problem
6 pages (1667 words) , Download 0 , Math Problem
Free
It must be sufficiently durable to withstand the environmental conditions for which the structure is designed. Using high-quality materials that are well mix-designed, handled and well placed, and finished ensures that the concrete material produced attains high strength and becomes durable when used in structural building (Dhir, et al., 2002).
Preview sample
Computer Aided Design Software Engineering and Construction Assignment
6 pages (1787 words) , Download 1 , Assignment
Free
The 2D computer Graphics software enables users of CAD systems to develop two-dimensional geometric models that are used in generating computer-based digital images. The software is mainly applied in the development of drawn or printed applications. The 2D CAD software generates an electronic image or file that can be transmitted electronically as DFX or printed on paper.
Preview sample
Health and Safety and Welfare at Work: A Case of Mrs. Preston Engineering and Construction Case Study
8 pages (2278 words) , Download 0 , Case Study
Free
In the United Kingdom, it is the duty of the employer to ensure that the health and safety regulations are fully complied with and this includes the task of managing the same at the workplace. The duty to protect the welfare of the employee that might be affected by the nature of the work of the employee is under the jurisdiction of the employer.
Preview sample
Commercial Software Packages and Computer Assisted Design Engineering and Construction Assignment
8 pages (2259 words) , Download 1 , Assignment
Free
Generally, in the product lifecycle management process, CAD is the major geometry authoring tool. It is composed of software and hardware of special purpose. The latest software packages have 2D, which is about drafting systems, and 3D, which is about solid design modelers and parametric surfaces (Groover & Zimmers, 1983).
Preview sample
2601 - 2650 results of 5632 items
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us