StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
The Role of Communication in Managing the Critical Interface Between Design and Construction Engineering and Construction Assignment
24 pages (6353 words) , Assignment
Nobody downloaded yet
The project life cycle is usually structured in a systematic process whereby, the ideas or views that are articulated by an owner are transformed into actual drawings by a designer. After the designer highlights the specifications of the owner by drawing, the constructor is then left with the role of transforming the owner’s ideas into reality
Preview sample
Safety in Maintenance and Use of Building Engineering and Construction Research Paper
13 pages (3821 words) , Download 0 , Research Paper
Free
Some building materials, such as, asbestos are highly dangerous to human health especially those that handle it. Drainage, lighting, heating systems, stairs, and walkways ought to be maintained well so as to avoid unnecessary accidents. Therefore, this study attempts to investigate such cases and provides ways in which they can be prevented.
Preview sample
sponsored ads
Hire a pro to write
a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Tensile Tests on Metals and Plastics Engineering and Construction Assignment
6 pages (1663 words) , Download 0 , Assignment
Free
The thrust comes from the reciprocating transverse motion in the engine then converts it into rotary motion of the crankshaft. The piston should be strong enough to remain rigid with the repeated loadings and light to minimize the inertia forces produced when the rod stops and change the direction at the end of each stroke.
Preview sample
Qualitative Analysis of the HS2 Railway Line Project Engineering and Construction Case Study
9 pages (2634 words) , Download 4 , Case Study
Free
It is apparent that the HS2 project is associated with major flaws, which might plunge the UK into another economic crisis. Provisions for risk and optimism bias, arising from the government’s quantitative analysis, do not appear to be adequate. The government was optimistic in estimating rail demand, which, when coupled with the extended demand timescale, makes the project risky.
Preview sample
The British Governments Strategy in the Implementation of the Plan in the Construction Industry Engineering and Construction Case Study
7 pages (1996 words) , Download 1 , Case Study
Free
Because of the need to control the economic problems resulting from pollution of the environment and depletion of natural resources, the British government decided to work with the construction industry in a strategy for sustainable construction. The construction industry contributes to a huge percentage of environmental pollution.
Preview sample
A Guide to the Criteria to be considered when selecting Casing and Tubing for Oil and Gas Wells Engineering and Construction Term Paper
14 pages (3592 words) , Download 0 , Term Paper
Free
Bursting force is the other mechanical force that may arise due to internal unbalanced pressures. The pipes used in both casing and tubing should have mechanical properties that enable them to be resistant to bursting pressure, collapse pressure among others. Many drilling engineers go for carbon steel pipes when choosing a casing material.
Preview sample
Analysis of Traffic Crash Barriers Engineering and Construction Case Study
6 pages (1622 words) , Download 0 , Case Study
Free
common defects associated with Pressing and Sintering is Lamination cracking. This is a situation whereby air gets trapped inside the powder during the pressing stage and the sides of the components may show some signs of cracking when air tries to escape out. This defect is mainly caused when the powder is being compressed at a very fast rate.  
Preview sample
Motorway Crash Barriers: Materials and Manufacturing Selection Analysis Engineering and Construction Case Study
7 pages (1905 words) , Download 0 , Case Study
Free
From the report, we can deduce that in order to manufacture crash barriers that are road-worthy,  material selection is extremely important.  In addition, it can be concluded that the manufacturing methods take into keen consideration the environmental implications of  all procedures undergone in the manufacture of  Crash barriers.
Preview sample
Box of Tricks and Fixing the Wheel Axles inside the Box Engineering and Construction Assignment
7 pages (1909 words) , Download 0 , Assignment
Free
The technical aspects of the design have been simplified to make it easier for non-technical readers to understand the usage of the box of tricks. The designed box of tricks is not suitable for commercial but will be availed to the public with a few modifications made. The task of making this rotating motor inside a box was not an easy task.
Preview sample
Designing a Box of Tricks Engineering and Construction Term Paper
4 pages (1191 words) , Download 0 , Term Paper
Free
The design enables the user no to slow down while operating or limit the user. It’s a design that when applied well, offers more than the existing solution to the user. The materials used for the final design of the box should be the correct size as identified and designed. Correct material helps in safety and easing the functionality of the box.
Preview sample
Hand Pump Bottle Dispenser Design Engineering and Construction Term Paper
6 pages (2238 words) , Download 1 , Term Paper
Free
The bottle shall consist of a pump mechanism that is pre-assembled. The mechanism of pumping shall also include the pump housing which encloses and receives liquid. The bottle body shall have an oval cross-section. A tube shall be fitted at the lower end of the pump in order to dip into the liquid or paste that is supposed to be dispensed. Inlet ball shall be incorporated.
Preview sample
Product Design and the Cost of Production Engineering and Construction Coursework
10 pages (2796 words) , Download 0 , Coursework
Free
In an endeavor to address the demands public for a portable hand washing dispenser, the company instigated two indispensable decisive decisions. It notably expanded its product variety by incorporating a hand-washer dispenser and equally extended its production in terms of collection to guarantee hygiene. This leads to designing a new product that captures this targeted market.
Preview sample
Artificial Lift Technologies and Their Relevance in Production Optimization Engineering and Construction Term Paper
10 pages (2834 words) , Download 0 , Term Paper
Free
Tools used in the optimization of the wells revolve around the value that calls for proper monitoring of the reservoir changes. This involves the quantification of data well as controlling the manner in which the state of the well. Analysis of the artificial system involves the operation of the workflows.
Preview sample
System Modeling Concepts Engineering and Construction Term Paper
6 pages (1907 words) , Download 0 , Term Paper
Free
It emphasizes the building of systems in the right way as well as focusing on selecting the appropriate systems and their interactions with an aim of satisfying design requirements. In addition, it addresses the operations and development of monumental products, as well as the development and functionality of evolving programs.
Preview sample
Fundamentals of Constructive and Innovative Construction Engineering and Construction Essay
9 pages (2253 words) , Download 1 , Essay
Free
Be it commercial or domestic buildings, the constructors should be equipped with adequate knowledge regarding the construction work to be in a position of handling any mishaps that may arise in the course of their work. According to Holt (2005), one of the essentials that the constructors should take into consideration before embarking on the construction work is safety.
Preview sample
Fire Protection Engineering: Pressurisation Systems and Sprinkler System Design Engineering and Construction Term Paper
10 pages (2810 words) , Download 0 , Term Paper
Free
Sprinkler fitting and installation involves installing, inspecting, testing, and certification of sprinkler systems in different types of structures. They are designed for the purpose of suppressing or controlling fire and should therefore be designed, installed, and maintained properly to ensure effective performance (Brannigan, 2007). 
Preview sample
Definition Manufacturing Technology Engineering and Construction Case Study
18 pages (4788 words) , Download 1 , Case Study
Free
The system COP is the main performance parameter of concern for this study.  The COP limits for real cycles, systems COP limits, and ideal systems were developed. For various systems and can be compared to manufacturer-rated COP information, these can give an indication of the theoretical and practical maximum COP values. 
Preview sample
An Electrical Wiring Diagram for the One-Way Lighting Circuit Engineering and Construction Assignment
5 pages (1496 words) , Download 2 , Assignment
Free
The switch contains a live wire and a switched live wire. As soon as the switch is lit on, the connection is made between life and switched live wire. This in turn makes the circuit complete and the current start flowing through the circuit. The bulb glows. A fuse is placed in the active line of a circuit, to provide protection by fusing a wire in case of a short circuit.
Preview sample
The Connecting Rod for a Typical Passenger Car Engine Engineering and Construction Term Paper
14 pages (3841 words) , Download 0 , Term Paper
Free
Automobiles have changed the world during the twentieth century of the modern world in the developed world including the United States of America and other industrialized nations of the world with the provision of easy and accessible modes of transportation in the form of automobile cars. The introduction of these types of vehicles has also changed the landscape in the shape of a network of roads.
Preview sample
The Chassis of a Typical Motorcycle Engineering and Construction Term Paper
15 pages (4065 words) , Download 0 , Term Paper
Free
The manufacturing and marketing of the component are essential for the running of the vehicle in the changing world with the rapid pace of development during the twentieth century. The manufacturing process needs the special attention of all the stakeholders for the designing, manufacturing, and utilization, and after-sales services for the product
Preview sample
The Main Bearing of a 2MW Direct-Driven Horizontal Axis Wind Turbine Engineering and Construction Term Paper
14 pages (3859 words) , Download 0 , Term Paper
Free
The study will help all the interested parties to formulate necessary guidelines for future products especially in the field of renewable energy as wind energy to meet the emerging needs of future generations in the field and designing and manufacturing of the bearings will be handled with ease and effectiveness.
Preview sample
Analyzing and Formulizing the Manufacturing Processes for the POOPSTA Engineering and Construction Case Study
15 pages (4009 words) , Download 0 , Case Study
Free
This report answers the entire question abbot the manufacturing of a good quality poopsta (André Shalom, 2007). However, it is suggested that during the manufacturing process of poopsta all the environmental concerns like air, water, and soil pollution. This should be kept in mind and all the social corporate responsibility towards education.
Preview sample
Analysis of a Typical Stub Shaft Engineering and Construction Term Paper
10 pages (3060 words) , Download 1 , Term Paper
Free
Numerical control is the automation of the machine tools that are functioning with abstractly programmed commands in the encoded shape of a storage medium. The first NC machine was manufactured in the 1940s and 50s, based on the existing engineering tools that were modified to follow points as were fed into the system on the paper tape mechanism.
Preview sample
Making Bearing Housing Engineering and Construction Case Study
5 pages (1446 words) , Download 1 , Case Study
Free
A bearing house poses the qualities like a rigid, strong, inexpensive, and lightweight bearing housing to accommodate the bearing in ease and comfort as per technical specifications of both the bearing and bearing housing. To meet all these requirements, the housing is shaped in the form of a tube with a central rectangular cross-section to accommodate the structure within it as the bearing.
Preview sample
Introduction to Materials, Tribology and Surface Engineering Engineering and Construction Assignment
22 pages (6069 words) , Assignment
Nobody downloaded yet
Recycling steel is cheaper than iron ore and it is easy to manipulate the old steel to form new steel through the production process. The advantage of steel is that no physical properties are lost when recycled and that has helped to reduce energy and material requirements when compared with iron ore refinement. The annual energy consumption can be reduced by 75% when recycling is done.
Preview sample
Building Analysis on Savil Building by Glen Howells Architects Located at the Great Park Windsor Engineering and Construction Case Study
7 pages (2089 words) , Download 0 , Case Study
Free
It could be observed that concerning Savil Building, the aesthetic of presentation of the building actually got along well with the location where it has been situated. Through improving the entire landscape of the park, the building actually creates a fine presentation of the area whereas it obviously makes it possible for the visitors to feel as if they belong to the landscape itself.
Preview sample
Demonstrating Turbulent and Laminar Flows Engineering and Construction Research Paper
30 pages (8264 words) , Download 1 , Research Paper
The equipment employed in this experiment is simple and valid as the apparatus is readily available. This will enable in discerning the flow patterns as one regime changes to another. Reynolds used a tank that was arranged in a way where a tube was used to draw water in the middle of the reservoir into which he had added a colorant via a needle. 
Preview sample
Design and Development of Superior Heat Exchangers Engineering and Construction Research Paper
23 pages (6142 words) , Research Paper
Nobody downloaded yet
The designing and manufacturing of superheat exchangers is completed in the shape of a project with a set of activities as the subcomponent of the overall designing and manufacturing process. The overall heat transfer mechanism works under the standard conditions of temperature and pressure with internal energy to maintain a thermal equilibrium between the two divergent systems.
Preview sample
Tests on the Rig and Assess the Performance in Terms of the Pressure Losses around the System Engineering and Construction Research Paper
24 pages (6254 words) , Research Paper
Nobody downloaded yet
The tests on rigs are the chief activity in the whole mechanism and are carried out for a period of three days during the implementation period. These tests are generating relevant data relating to the internal as well as external systems of the overall implementation mechanism for the conduction of the experiments. 
Preview sample
The Test Equipment for the Cam Follower Engineering and Construction Case Study
21 pages (5241 words) , Case Study
Nobody downloaded yet
The replicable motion depends on the complexity of the shape and hardness of the cam. Cam follower systems contain specific shapes for specific types of motions. The teardrop shape or teardrop displacements motions are obtained by the cam follower systems used in the pistons of the vehicle engines. The fast upward downward motion causes the other piston to catch spark to run the engine.
Preview sample
Equipment to Measure the Static Coefficient of Friction Engineering and Construction Term Paper
26 pages (7018 words) , Term Paper
Nobody downloaded yet
When a person pushes an object like a wooden block on a smooth steel sheet the exercise is very easy, whilst in the case of a wooden sheet the activity is deemed to be more difficult and cumbersome, but if one pushes some wooden sheet on a road surface the whole endeavor becomes even more difficult.
Preview sample
Elasto-Hydrodynamic Lubrication Friction and Visualization Test Equipment Engineering and Construction Research Paper
24 pages (7392 words) , Research Paper
Nobody downloaded yet
Various algorithms to open signals established in literature were trialed. Also, a custom resolution that coalesces a typical incorporation method for the stage derived with transformational coordination was executed. Even though this was performed, a more refined phase opening of the algorithm is essential to augment the opportunity of appraising.
Preview sample
Health and Safety Legislation: CDM 2007 and the Duty Holder Responsibilities Engineering and Construction Term Paper
7 pages (1981 words) , Download 0 , Term Paper
Free
In CDM 2007, duty holders are advised to take all necessary action to control the risks. For this reason, they are more accountable for the standard of health and safety applied to a project. In other words, when an accident occurs as a result of negligence or breach of the CDM 2007 Regulations, all duty holders are legally liable. 
Preview sample
Analysis of Geology of a Major Civil Engineering Project Engineering and Construction Case Study
6 pages (1789 words) , Download 1 , Case Study
Free
It can thus be concluded that geological engineering is an important part of the civil construction process so as to ensure that the impact of the construction can study beforehand, and suitable steps are taken to ensure that these concerns are addressed to avoid problems and complications in the future. 
Preview sample
Electromagnetic Compliance of Electronic Products Assessment Engineering and Construction Case Study
8 pages (2055 words) , Download 0 , Case Study
Free
In today's expanding high-technology environment, technology product architects and designers are continuously being challenged by the issues of electromagnetic interference. This is because is not just because of ensuring that their products achieve optimal performance but also to achieve compliance with the current rigorous Electromagnetic Compliance (EMC) requirements.
Preview sample
Definition of Motor Vehicle Disaster Engineering and Construction Case Study
9 pages (2695 words) , Download 0 , Case Study
Free
In the recent past, the location of airbags in motor vehicles has continuously changed tremendously, this is mainly attributed to an industry trend to recess the driver’s airbag into the steering column, but this change has been slight with the average driver’s airbag being recessed only 0.2 inches below the pane of the steering wheel.
Preview sample
Electronic Sensor Design Engineering and Construction Term Paper
6 pages (1688 words) , Download 0 , Term Paper
Free
The report will examine a variety of electronic sensor designs along with their practical application in electrical appliances. An electronic sensor measures some features of the world like sound, pressure, light, and converts that measurement in the form of an electrical signal usually into current or voltage.
Preview sample
Leonardo da Vinci's Plan for the Re-Design of Milan Engineering and Construction Case Study
10 pages (2821 words) , Download 2 , Case Study
Free
The word ‘Renaissance’ literally means ‘rebirth,’ but “the term ‘Renaissance’ might now be defined as a model of cultural history in which the culture of fifteenth- and sixteenth-century Europe is represented as a repudiation of medieval values in favor of the revival of the culture of ancient Greece and Rome.”
Preview sample
Advance Aircraft Material Engineering and Construction Literature review
7 pages (1912 words) , Download 3 , Literature review
Free
In earlier phases of aircraft engineering, the development of better models was greatly affected by the lack of corresponding development in the materials needed for the construction of these models. But the breakthroughs in the technology as well as material science, modern aircraft can be considered as manufacturing marvel.
Preview sample
Generation and Distribution of Electrical Energy Investigation Engineering and Construction Term Paper
9 pages (2733 words) , Download 0 , Term Paper
Free
Various renewable and inexpensive sources of energy were introduced in the 21st century and these widely available energy sources are converted to usable forms such as electricity to provide developed countries with a higher standard of living and support others in their economic development (National Research Council, 2001, 9).
Preview sample
Means of Warning and Escape Routes Engineering and Construction Term Paper
15 pages (4017 words) , Download 0 , Term Paper
Free
Before deciding to build the horizontal escape, the most important factor according to the regulation that should be taken into consideration is the number of occupants in the building, the size of the building in terms of height, and the distance that exists between the residential rooms and the escape routes (London Fire Brigade, 2010). 
Preview sample
Fire Engineering of Building Structures Engineering and Construction Assignment
18 pages (4723 words) , Download 0 , Assignment
Free
Lack of proper building standards is to blame for the fast-spreading of the fire due to the incapacity to control the fire within the building. The lesson learned from the fire tragedy is the usefulness of using proper building materials that can resist the heat from the fire. Developers should prefer to use concrete for other building materials.
Preview sample
Design of a Motor Speed Sampling, Amplification, Filtering and Display Circuit Engineering and Construction Assignment
5 pages (1501 words) , Download 10 , Assignment
Free
The project design and implementation were both successful. At the beginning of this project, I put forward the objectives which I wanted to achieve. I can confidently say that the major objectives have been met to a good degree. I wanted to design the circuits used for motor speed sampling, amplification, filtering, and display. 
Preview sample
Flame Propagation on Cables Engineering and Construction Term Paper
5 pages (1407 words) , Download 0 , Term Paper
Free
Apparently, most buildings are made of a variety of cables. This may cause serious fatalities when they are loaded across the building. This requires that the cables that have to be used have to meet certain accepted standards in order to enhance the safety of the buildings. In most buildings, the fire retarded cables have been used due to their low cost.
Preview sample
Characteristics of Successful CEO in Engineering Field Engineering and Construction Term Paper
10 pages (2724 words) , Download 0 , Term Paper
Free
The engineering field has its challenges which the CEOs in that field have to deal with each and every day.  However many of these problems are common to other CEOs in companies in other fields as well. There are several mature companies that are run by Chief Executive Officers that are engineers by profession. These people may also have some artistic and creative background.
Preview sample
Properties of Brick and Block Materials Engineering and Construction Term Paper
7 pages (1945 words) , Download 0 , Term Paper
Free
Construction normally requires the application of various building materials such as sand, clay, wood, bricks, and blocks. These building materials are either natural, such as sand, wood, and clay, or man-made such as bricks and blocks. The properties of bricks and blocks are based on material components, how they are mixed, availability of chemical stabilizers, and the process of manufacturing.
Preview sample
Structure and Performance of Timbers for Use in Construction Engineering and Construction Term Paper
6 pages (1654 words) , Download 0 , Term Paper
Free
Timber is a popular engineering material as it is used in many countries as a traditional building material. There are several factors that are considered when selecting timber that include strength, appearance, the availability of species size and sections; the durability and the ease of preservation, and the cost of the timber.
Preview sample
Sieve Analysis of Sand Engineering and Construction Assignment
5 pages (1382 words) , Download 0 , Assignment
Free
Aggregate can be classified as being natural or artificial depending on where it has been sourced from and the preparation method involved. Through weathering and wind and water action natural sands and gravels are obtained and by crushing natural stones coarse and fined manufactured aggregate is obtained.
Preview sample
The Design, Implementation, and Test of Bipolar Transistor Amplifier Engineering and Construction Term Paper
8 pages (2259 words) , Download 1 , Term Paper
Free
The circuit for the common emitter amplifier is normally used in applications where a small voltage signal needs to be amplified to a large voltage signal. Since the amplifier cannot drive low resistance loads, it is usually cascaded with a buffer that can act as a driver. The following conclusions were also made.
Preview sample
The Bipolar Transistor and the Long-Tailed Pair Experiments Engineering and Construction Term Paper
12 pages (3177 words) , Download 1 , Term Paper
Free
High-power, high-frequency operation, which is used in microwave links and over-the-air broadcasting, is better achieved in vacuum tubes. They have improved electron mobility in a vacuum. Where their performance is reduced and noise is increased. However, in the majority of applications, the transistor has revolutionized how circuits are designed.
Preview sample
2851 - 2900 results of 5632 items
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us