Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
We could debate that the infrastructure in the smaller railway stations is not adequate to handle the retail shops. But we need to keep in mind that change is the only constant. We need to change the way we look at the smaller towns. The convenience should be available to all. We need to understand their need and also how to cater to them profitably so that the economy is given a positive thrust.
The risk differs depending on the contract. There can be two types of contract – lump-sum contract or the cost-plus-fee contract (Roxbury). The economic environment in two cases differs. In the lump-sum contract, work as defined and as required by the contract documents has to be completed within the contract time stated in the agreement.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
The word ‘Renaissance’ literally means ‘rebirth,’ but “the term ‘Renaissance’ might now be defined as a model of cultural history in which the culture of fifteenth- and sixteenth-century Europe is represented as a repudiation of medieval values in favor of the revival of the culture of ancient Greece and Rome.”
56 pages (10005 words)
, Download 2
, Research Proposal
An increasingly popular aspect of classic channel rehabilitation is the integrated improvement of the channel's environmental characteristics as part of the overall rehab. Channel rehabilitation with integrated environmental improvements can include adjustment of the constructed channel alignment to mimic more natural conditions;
In the food industry, the most usual floor contaminants are fats and oils. They are particularly hazardous since they are not too conspicuous or visible to those who are allotted to do the cleaning. Moreover, it only takes a very small amount of these to make the floor dangerous – and slippery.
First, flood or sea defenses are structures used to prevent the land from being flooded by the sea; examples include earth embankments in estuaries. Second, there are coastal protection structures, a term used to describe measures taken to prevent the land from being eroded, such as sea walls along the base of cliffs. (Cooper 9-15)
After review of the availed data, safety parameters in a chemical industry was reached at as the main project goal. The analysis of these parameters was divided into four categories. These are risks the chemicals impose on human lives, measures necessary to avoid chemical risks, fire and explosion prevention and general safety within the factories.
A desk study was done to identify issues that could not be readily recognized through physical investigations as well as successive ground investigation. It integrated available documents with regard to nature as well as history of the site including books; geological maps, aerial photographs, and ordnance survey maps, as well as mining records and prior site investigation records. Investigation aimed at identifying elevated radon levels’ risk.
3 pages (750 words)
, Download 3
, Personal Statement
Free
As a graduate with a great passion for mechanics, the author has always found machines very interesting to deal with. His love for mechanics started as a teenager when he toured a steel production factory that had several machines and systems and this solidified his desire to pursue a career in mechanical engineering.
In the automotive engines, the most common used material for making the piston is Aluminum because of its lightweight, affordability and its availability (Rao, 2011). Due to the high combustion temperatures of the cylinders, copper and nickel are used as the materials to help increase the tensile strength of the piston.
A stapler has different parts, and these parts include the body, base with the anvil, staple’s magazine, leaf spring, helical coil spring, raceway, rear pin joint, blade and staple exit. The illustrations below show the parts of the stapler
In order to evaluate the complete water level alongside each situation or picture, a function in the form of equation is practiced by means of ≥ button. This aids in identification of overall level by dint of the provided set of data through diverse slide parameters as well as through provided values at diverse levels.
The model can also extend to include other numbers such as the “n” of the modes of porosity. These modes exist because the soil structure is usually hierarchical. It is also used together with other models to produce a model that promotes a saturated hydraulic conductivity. These are the hydraulic conductivity models such as the Marshall’s pore model.
The given block diagram provides details of three distinct set of levels. With the potential fall down till level of 3, this is indicative of the scenario that the small scale pump needs to halt for purpose of preventing any losses.
Bridges act as physical structures designed to span geographical obstacles such as rivers, valleys, and roads for the purpose of establishing passage over the obstacle. Currently, there exist thousands of bridge designs that serve the general purpose of providing passage between two different points.
This study’s primary aim was the development of new guidelines and recommendations that can be applied to various hydraulic, structural elements in areas that are prone to tsunami flooding. As a result, the new guidelines are targeted at making the onshore structures have sound designs that will make them resistant to tsunami flooding.
As the paper highlights rolled threads are produced on wide various parts by the thread rolling. most times, requirements of the rolled threads is by design due to their superiority in the shear, tensile and fatigue strength. To remove the thread form, several processes are required to pass the material through.
Chernobyl, particularly the city if Prypiat, will never forget the 1986 disaster that virtually all investigations have termed as ‘gross engineering failure.’ The plant is currently decommissioned but the public will never forget what happened three decades ago. The Chernobyl was barely a decade and half old when the disaster unfolded.
11 pages (2750 words)
, Download 4
, Research Paper
Free
The author states that the incidence attracted interest from various stakeholders such as the National Bureau of Standards, Occupational Safety and Health Administration and ACI. In their research, the groups identified various structural and engineering flaws carried out by the designers and engineers.
In the paper the writer focuses upon the implementation of integrated time-driven scheduler. The lead requirement is that this scheduler must be supportive of numerous scheduling policies because there are no universal scheduling policies that fit all applications. As such, the scheduler crossing point should support the scheduling policies changing interface.
The author states that certain methods of the organ or tissue preservation require dynamic movement of gases and fluids. Hypothermic machine perfusion is one of the traditional methods employed in organ preservation. The application of these approaches aims to enhance the proliferation of oxygen and fluids to the establishments of an organ or tissue.
Engineers perform triaxial experiments to determine soil properties exhibited in particular soil samples. The universally tested soil abilities include shear properties, hydraulic conductivity and soil effectiveness (Soyoye and Ademosun, 2014 p.2). Considering ethical and safety requirements during experiments is crucial.
The MATLAB Code was used to estimate the critical gain value (Kcr) by looping through a range of K values from 1 to 50,000 in steps of 1. The existence of a pole in either the positive region or 0 made it stop the looping. The K values were generated, which presented the output of poles.
To examine the statistical properties of the data, the mean and standard deviation of the two set of data is calculated and is shown in Table No 2. From the data, it can be observed that strain values in reading-1 are lower than the values in reading-2. The reason why initial strain readings were low is that the structure had an initial ‘slackness’.
The author of the paper explains that hall effect is the voltage difference in an electrical conductor which normally occurs when a magnetic field is applied to a rectangular shaped conductor at right angles when it is carrying electric current. Theoretically, hall effect is explained by the principles of Lorentz force.
The author states that the constraints that may be devised may occur from structural deliberations or exogenous such as constructibility, mechanical and architectural considerations. Thus, constraints emanating from various domains might interact with one another, hence building mutual constraints.
The author explains that some of the main applications of sensors include measuring vehicles, starting the wash, controlling the opening, and closing doors. Generally, problems are often experienced when single sensor applications are used. A solution to the common problems could be achieved by combining sensors as well as by using measuring methods.
Arup utilized strategies that considered the socio-psychological components of human behavior in the planning process, which underpinned the development of semi-independent, less-bureaucratic hierarchies to facilitate motivation and project commitment from the team members. Combined with planning that considered issues of potential change resistance, effective leadership was manifest as a planning ideology when managing people in the project.
10 pages (2500 words)
, Download 3
, Research Proposal
e Kingdom of Saudi Arabia has undertaken numerous public construction projects over the last forty years as part of national development programs, which has involved the investment of significant public expenditure (Al-Otaibi et al., 2013). However, public construction projects
The specimens made use of aggregates of varying coarseness. There were fine, 10mm, and 20mm aggregates. The coarse aggregates were sourced from Holcim Pty Limited (Australia) while the fine ones were supplied by Rocla Pty Ltd. The 10mm and 20mm aggregates were used for the saturated-surface-dry condition (SSD).
The author states that the experimental rig provided is well designed and fabricated and the schematic diagrams of the same that have been provided indicate this. The main components of this experimental rig include a supply tank, flow meter, centrifugal pumps, PVC pipes, control panel, ball valves, pressure transmitter, and a pressure gauge.
The most convenient way of placing this equation is A = π d2 / 4. It is necessary to reduce the cross-sectional area of the pipe because this then increases the pressure and reduces the speed of the flow of the fluids. Figure 1
MEPM activities come with numerous benefits among them significant optimal resource application through saving of costs and time.
When machines are used over a long period, they wear and tear. Wearing and tearing of biomedical machines
Such a process is achievable by mixing diverse ingredients, tailoring them and coming up with a final product
v. Speed is an imperative characteristic of the printing technology. Efficiency the
As such, the maximum shear stress, which the soil can bear, gives the shear strength of the soil. Excess shear stress results in the failure of the soil, which may occur mostly because of catastrophic loading on the
The test can be limited due to the outlier brought by the incorrect experimental process, sampling, calculation or observed value (Smith, 2013). The outliers can be noted by the scatter plot of the residual versus the predictor.
Generally speaking, the retest disadvantage of the Lost Foam Casting (LFC) technique lies in the high costs of tooling which acts as a constraint for the manufacturers with lower manufacturing volume to make use of this innovative and advanced casting method in their manufacturing and construction systems.
Economics of this approach significantly relies on materials as well as applications choices. For instance, suppose the operation designed to commence is simple or if the material set for advancement one can utilize other means then embarking on using other approaches is a justifiable move. This is instead of using ECM, which in that situation may prove to be extremely pricey.
Diffusion Bonding is a method applied in welding (Solid State) metals and other related materials. Diffusion Bonding is able to join similar metals as well as metals that are not proportionate to each other. This method of metal joinery works under the principle of materials science of solid-state diffusion.
The use of rapid prototyping also allows rapid creation of tools for the manufacture of physical prototypes. This allows for the saving of the time spent and cost incurred on the production
MoTe2 is controlled by Fermi surface nesting. The structural distortion has currently been reported to be causing intrinsic band inversion in set 6 monoclinic TMDs. Theoretical computations have also exhibited more electron doping producing more efficient Fermi surface nesting promoting high IT stage instability.
The most important function of a vehicle’s transmission system is to act as a control of the power output from the engine to the wheels. Different terrains and loads on the vehicles necessitate variable power control over the engine to the wheels to enhance vehicular
The leakage that was from the fuel tank burned a large plume of fire that was trailing directly behind the engine. The crew that heard a thug assumed it and had no indication of fire
First, one of the failures in materials can be detected as the buckling of the compression chord. According to (Delatte 22) “The collapse of the Quebec Bridge resulted from the failure of the lower chords in the anchor arm near the main pier”. Another engineering failure can be seen as the torsional oscillation which can cause damage in bridges.
Secondly, there are twelve cases of failure analyzed in the document, which have all enabled the engineers to time to enact features and codes in the operation of the engineering work to avoid
There has been a strong belief that the concept of controlling the flow while delaying the transition from laminar to turbulence was based on the surface smoothness until groove riblets proved the opposite. This is partly because drag reduction has lower energy consumptions of up to 10% for several applications with the small but longitudinally grooved surface.