Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
Once installed, the stove can be used to the advantage of the owner owing to its improved efficiency. The wood to be used in this stove is split so as to enhance entry into the stove opening and to increase the combustion surface area. Fire lit for this kind of stove needs tending in a bid to maintain high fire efficiencies and temperatures.
This project consists of designing a module for a single-phase induction generator to interface with the existing H-bridge and enhance its functionality. This design will feature various inertial, position switches and utilize variable frequency drive (VFD) with the motor.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
LCC assesses and anticipates future resources required for production. Therefore, it helps management in determining what to purchase. As a result, managers can make effective and efficient decisions, and redundant purchasing can be avoided (Frankel & Wei, pg 31). c) Assist management to identify factors that increase costs.
The “Modbus ASCII” unlike the other two can be regarded as being the first Modbus which is also still a serial protocol and which runs typically on either the “RS-485” Physical layer or the “RS-232” physical layer. The Modbus ASCII frame is known to be about 252 bytes in its length and it is also capable of having a total of about 247 addresses.
The volatility of the product is also an important factor, but this must be considered in the context of the temperature at which it will be used. So if you are pouring a solvent from one open container to another at a temperature below its flashpoint, there should be no hazardous area, because too little vapor is present.
When designing the SCADA system for an ethylene cracker gas plant, an appropriate platform is chosen to support different features. A resolution of 1280 by 800 is appropriate for the gas plant and is usually considered during the design. The resolution is readily available in the market and hence making the design process easy.
All the collected information will be organized and then studied so that the processes are understood. An investigation into available literature material will also be done to consolidate and supplement the information collected from the study. Once this has been done, final findings, lessons, and ideas learned will be compiled and organized into a single piece.
10 pages (1509 words)
, Download 0
, Research Paper
Free
Crude oil unit is faced with a choice between three options that is inspect the unit after every three months, wait until one unit fails and carry on inspections or repair failures as they occur. The option of inspection is faced with a decision of outsourcing or having permanent staff to carry out inspection.
The crude oil process is composed of five business resources: man, machine, method, material, and environment. Man is the human resource designated to run the process. The machine is the equipment used so that raw materials may be converted to finished oils. Methods are the techniques used in assessing the phases during the material conversion.
An allotment of land based towards the Southeast of the University of Southern Queensland near the New England Highway which covers an area of about two hundred and twenty-six hectares has been chosen to be used for the purpose of the future development of a new estate for new residential houses. When finally complete, the subdivision should be able to house approximately 8,000 residents.
There are different types of HVPD signals that cause different degrees of damages to particular electrical equipment. Some of these signals include the power-line system carrier communication noise, rotating machine commutator noise, corona discharge noise, colored noise, and electric appliances switching circuit noise, among others.
8 pages (2186 words)
, Download 0
, Research Proposal
Free
The preliminary research also indicates that the control of the grid-connected converter is dependant o the application. This is because different applications require different converters. The research is also keen on enhancing the grid-connected converters for the purposes of ensuring that it is able to work on different applications.
Therefore, a slight change in parameters could bring an effect on the entire processing unit. How these changes could be coordinated to give a more desired aftermath was integral in this design. Of these, three types of heat exchangers were used for the entire experimental design. This kind of design was important to help compare the overall efficiency of multi-tool at different functions.
The effects of cavitations cannot be underestimated; the violent collapse of the cavitations produces a shock wave that can easily curve materials mainly from the internal components of the pump. This usually affects the leading edge of the impeller; this creates many noises mostly described as the pumping gravel.
The people of Nepal, and specifically in the hilly regions of Parbat, make use of the heavy rainfall in the generation of electric power both for industrial and domestic uses. This means it is possible to generate power for use in running the machinery and equipment that will be used in carrying out the project.
Pre-monsoon season: this season occurs from March to mid-June and it is characterized by variable weather conditions with both nights and days warm. These warm conditions are characterized by varying temperatures that increase as the season progresses. As the season, progresses there are often thunderstorms and occasional short periods of heavy rain or hailstorm.
Engineering is a technical field for any company. As such, every department in a firm must play its role in a more accurate manner, to make sure that there is no flaw that may happen in the company’s operations. In this scenario of buying ADDC equipment, all these departments are involved in one way or the other.
The implementation of this project will critically look into the aspects of activity planning through the use of WBS (Work Breakdown Structure) and PERT analysis in relation to time planning. The analysis will look into the best strategies that will deploy in the process of time and cost estimation with emphasis on the best methods in relation to theories on project management.
The achievement of dimensional accuracy and minimization of defects is expected to be achieved at the stages of fabrication and final finishing of the multi-tool with regard to desirable features. The surface finishing at the assembly point will ensure that the surface condition matches the required specifications.
I realized that I was unable to use a tripod, a spirit level measure, and horizontal lines. Most of the leveling equipment gave me difficulties in obtaining accurate results although I followed all the procedures that were necessary for the project. Although there was a desire to have accurate results in the future, that kind of weakness will lead to my failure in the future.
Therefore, it is important to have the proper knowledge and be in a position to utilize the available resources to develop the expected procedures that will lead to the success of the entire project. In the event that some of the electrical aspects like water collection for renewable energy generation, it may reduce the need to source electrical power necessary for the project.
It is always said that Innovation is the mother of invention, and this remained a saying until the arrival of Airbus A3XX, which later changed its name to A380, in the wide aircraft market. Boeing Dreamliner had ever since dominated the large aircraft industry with its large, spacious, and posh design until 27th April 2005 when A380 made its first air flight by then with Singapore airlines.
Heathrow airport has offered a better level in allowing all engineering concepts ranging from civil to structural engineering to be applied at the fastest growing international airport. The introduction of building a Heathrow hub at the airport will boost the growth of engineering since the newest models and principles are being put in place.
In most instances, water that contains chloride salts, for example, CaCl2, NaCl, and MgCl2, gets drawn from a crude oil well as well as with various hydrocarbons. The degree of concentration of these salts in this crude oil is dependent on the oil fields from where the extraction of crude oil is done.
The design process will be followed by the actual construction and running of the furnace using the PLC system. This process will be fully dependant on the design details. This part will be carried out with a lot of care for the purposes of ensuring that the design principles are met and high standards are maintained.
EDM when combined with theodolite is used in an electronic tachometer. The instruments are connected to the field computer to help store and process the data electronically. The EDM used in this way is used in contour surveying. According to Richards and Hermansen (1995), plans of large areas that would otherwise take several days can be delivered in just a few days.
The anti-lock braking system, (ABS) is a braking system that is designed to ensure that drivers maintain maximum steering ability in addition to avoiding skidding while braking in varying scenarios (Antić., Nikolić, Mitić, Milojković & Perić, 2010, p.42). ABS was specifically designed to improve the braking ability of vehicles on wet surfaces.
The piston engines also produce a lot of noise. For instance, the piston aircraft engines have a maximum speed ranging from 2,500 to 3,000 rpm. The propeller may, however, be inefficient and generate much noise at this rotational speed. Due to this drawback, piston engines typically have a step-down ratio of between 0.5 and 0.7.
Britain is to employ the technology and European standards of high speed that have already been used in German and France. The HS2 rail network is expected to turn the Victorian Britain rail infrastructure to 21st century standards which will help in creating space from the already overcrowded lines and bring the whole country together by improving inter-city transport.
As noted, the main problem started from the piping known as 4-sidecut/number 4 Crude Unit. A plot plan shows that the sub-contracted engineers failed to notice the corrosion in the pipe. It was recognized that the first problem related to this rupture was a failure by the engineers to notice solidification corrosion in the pipe.
Most of the spillages and overflows that do arise are a result of errors by human beings. Such operations should be executed as per the set laws and regulations because the damages caused when the oil spills are not easy to clear up and has serious damaging effects. This paper also provides the personnel with plans on dealing with spillages of oil.
A range of ethical dilemmas, concerning the environment, ethics, and engineering development. These include: is a favorable interpretation of data indeed unethical behavior? Does hiring engineers to do the job strictly as directed by their employers or clients ethical? Is the protection of the environment possible through ethical conduct?
High, medium, and low traffic prediction scenarios were integrated within the strategy, and checks were built in to keep traffic volume towards the low end of the scale. This was a sustainable solution as the financial implications for the client were reduced, as was the need to deal with transport issues in the future.
The supposed vibration of the motor does occur over a moderately broad frequency band as opposed to the low when compared to the higher frequencies. There are different problems that may occur in a rotating motor especially when loaded. The problems that do occur arise from the distinct vibration types.
The product will be utilized to focus on the pedal degree, expert chambers, calipers, and the number of rotors and their geometry. The managing elements of the outline procedure were the most extreme braking force, negligible weight, and reasonable temperatures while keeping up the unwavering quality.
The paper "Residential Building Design" is an exceptional example of an assignment on engineering and construction. Just like any other country, Saudi Arabia has legislations that seek to protect the environment by ensuring that all the construction projects meet the sustainability and environmental standards established by the government of the Kingdom of Saudi Arabia.
The author of the paper states that the existence of rugged terrain in the selected site may result in difficulty in constructing the foundation for the building. In order to use the selected site, it will be necessary to ensure the surface of the land is leveled and any rocks, pebbles, or stones in the location are removed.
The paper "Dredging in Ports and Harbor Construction" is a perfect example of a report on engineering and construction. This report looks at the application of dredging in ports and harbor construction. The methods discussed dredging: pontoon-mounted grabbing; pontoon-mounted (or shoreline) dragline; pontoon-mounted pumping; self-propelled trailing suction dredging.
An increase of water supply to a continuous system implies an increased supply of water. It is expected that the demand for water shall be on the increment because of the rising demand from the growing population and from the growing number of sectors that require the use of water. The cost of a continuous supply of water is also expected to increase.
The forces and velocities involved in a wind turbine are as shown in figure 1 where the resultant vector is and represents a vector sum upstream air velocity and velocity vector of the turbine blade. There is the creation of varying resultant airflow, where there is a positive blade angle of attack for the upstream zone of the machine, with the signs changing downstream.
6 pages (1723 words)
, Download 0
, Research Proposal
Free
The developed level crossing solution is meant to discover a forthcoming train using system tie points that are modulated using an alternating current carrier wave signal. This is done by attenuating the variable shunt with effect to the oncoming train as a monitoring device to check the varying signals.
Liquid bacteria acid can be used to eliminate slime and bacteria. Sulfamic acid can be used, alongside the modifiers and inhibitors to eliminate clogs. Chlorine compounds may as well be used to effectively kill bacteria. This will improve water quality, as well as prevent deterioration of the water distribution system (FEMA 26).
Based on the understanding of an agent, a multi-agent system is an artificial system that is made up of diverse autonomous agents that are well collaborated in order to achieve a major organizational goal. These agents usually work simultaneously while pursuing individual goals that contribute to the achievement of a single final objective.
The design choice in this context of the engineering community project will have a positive impact as far as the use of local resources is concerned. First, the design that is expected to be used in the construction of the bottled house will make use of the plastic bottles, which are regarded as local resources among other construction materials.
Compared to other types of foundations piers have very distinct advantages. Sometimes when pile penetration is, difficult piers are used. This is because of their high penetrating capability. It does not cause vibration and soil during pier installation, this useful when the adjacent structure is on spread footings or under short piles.
In line with the modern world requirements of environmental sustainability, there is a need to produce equipment that is environmentally friendly. Our Company intends to produce plastic sheets from recycled materials. The machine will produce plastic sheets that are sustainable from recycled plastic sheets.
Manufacturing processes are energy-intensive and account for over one-third of the total energy consumption. As the world population continues to grow, so is the need for energy. This energy used is normally fossil and the more the energy used the more the emission of greenhouse gases to the atmosphere.
On tuning the engine by altering the heat release or injection profile, the maximum amount of mechanical power output was increased to 1.861. This was achieved even as the total amount of fuel was maintained at the nominal amount of 0.9units. The maximum pressure was also maintained at 20 bar to avoid the engine from blowing up.
The use of MRI has revolutionized the world of medicine as the methods that were earlier used to view the internal human organs were accompanied by a score of side effects, some more lethal than the disease being scanned. The use of MRI for scanning is totally harmless and the images produced are easier to understand.
. Resizing the images was an important aspect because they were required to have a workable aspect ratio among each other. The plane image was therefore resized to 448x102 pixels and saved as a PNG image due to the transparency benefit it poses towards Html development. The image achieved during this exercise is shown in the figure below.