StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Hand Pump Bottle Dispenser Design Engineering and Construction Term Paper
6 pages (2238 words) , Download 1 , Term Paper
Free
The bottle shall consist of a pump mechanism that is pre-assembled. The mechanism of pumping shall also include the pump housing which encloses and receives liquid. The bottle body shall have an oval cross-section. A tube shall be fitted at the lower end of the pump in order to dip into the liquid or paste that is supposed to be dispensed. Inlet ball shall be incorporated.
Preview sample
Designing a Box of Tricks Engineering and Construction Term Paper
4 pages (1191 words) , Download 0 , Term Paper
Free
The design enables the user no to slow down while operating or limit the user. It’s a design that when applied well, offers more than the existing solution to the user. The materials used for the final design of the box should be the correct size as identified and designed. Correct material helps in safety and easing the functionality of the box.
Preview sample
sponsored ads
Hire a pro to write
a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Box of Tricks and Fixing the Wheel Axles inside the Box Engineering and Construction Assignment
7 pages (1909 words) , Download 0 , Assignment
Free
The technical aspects of the design have been simplified to make it easier for non-technical readers to understand the usage of the box of tricks. The designed box of tricks is not suitable for commercial but will be availed to the public with a few modifications made. The task of making this rotating motor inside a box was not an easy task.
Preview sample
Motorway Crash Barriers: Materials and Manufacturing Selection Analysis Engineering and Construction Case Study
7 pages (1905 words) , Download 0 , Case Study
Free
From the report, we can deduce that in order to manufacture crash barriers that are road-worthy,  material selection is extremely important.  In addition, it can be concluded that the manufacturing methods take into keen consideration the environmental implications of  all procedures undergone in the manufacture of  Crash barriers.
Preview sample
Analysis of Traffic Crash Barriers Engineering and Construction Case Study
6 pages (1622 words) , Download 0 , Case Study
Free
common defects associated with Pressing and Sintering is Lamination cracking. This is a situation whereby air gets trapped inside the powder during the pressing stage and the sides of the components may show some signs of cracking when air tries to escape out. This defect is mainly caused when the powder is being compressed at a very fast rate.  
Preview sample
A Guide to the Criteria to be considered when selecting Casing and Tubing for Oil and Gas Wells Engineering and Construction Term Paper
14 pages (3592 words) , Download 0 , Term Paper
Free
Bursting force is the other mechanical force that may arise due to internal unbalanced pressures. The pipes used in both casing and tubing should have mechanical properties that enable them to be resistant to bursting pressure, collapse pressure among others. Many drilling engineers go for carbon steel pipes when choosing a casing material.
Preview sample
The British Governments Strategy in the Implementation of the Plan in the Construction Industry Engineering and Construction Case Study
7 pages (1996 words) , Download 1 , Case Study
Free
Because of the need to control the economic problems resulting from pollution of the environment and depletion of natural resources, the British government decided to work with the construction industry in a strategy for sustainable construction. The construction industry contributes to a huge percentage of environmental pollution.
Preview sample
Qualitative Analysis of the HS2 Railway Line Project Engineering and Construction Case Study
9 pages (2634 words) , Download 4 , Case Study
Free
It is apparent that the HS2 project is associated with major flaws, which might plunge the UK into another economic crisis. Provisions for risk and optimism bias, arising from the government’s quantitative analysis, do not appear to be adequate. The government was optimistic in estimating rail demand, which, when coupled with the extended demand timescale, makes the project risky.
Preview sample
Tensile Tests on Metals and Plastics Engineering and Construction Assignment
6 pages (1663 words) , Download 0 , Assignment
Free
The thrust comes from the reciprocating transverse motion in the engine then converts it into rotary motion of the crankshaft. The piston should be strong enough to remain rigid with the repeated loadings and light to minimize the inertia forces produced when the rod stops and change the direction at the end of each stroke.
Preview sample
Safety in Maintenance and Use of Building Engineering and Construction Research Paper
13 pages (3821 words) , Download 0 , Research Paper
Free
Some building materials, such as, asbestos are highly dangerous to human health especially those that handle it. Drainage, lighting, heating systems, stairs, and walkways ought to be maintained well so as to avoid unnecessary accidents. Therefore, this study attempts to investigate such cases and provides ways in which they can be prevented.
Preview sample
The Role of Communication in Managing the Critical Interface Between Design and Construction Engineering and Construction Assignment
24 pages (6353 words) , Assignment
Nobody downloaded yet
The project life cycle is usually structured in a systematic process whereby, the ideas or views that are articulated by an owner are transformed into actual drawings by a designer. After the designer highlights the specifications of the owner by drawing, the constructor is then left with the role of transforming the owner’s ideas into reality
Preview sample
The Renovation Plan for Abbey House Engineering and Construction Case Study
9 pages (2288 words) , Download 0 , Case Study
Free
The University purchased the building with the aim of relocating the overseas marketing headquarters in the building. The original plan was to retain the two listed elevations while the rest of the building would be demolished. As part of the renovation plan, it is required that the basement area be excavated so as to house a new room and vaults used in the storage of students' records.
Preview sample
Improving Safety in the Design of Buildings in the UK Engineering and Construction Research Proposal
7 pages (1956 words) , Download 0 , Research Proposal
Free
This study focuses on establishing the major causes of fires in relation to the design of the buildings; the focus, in this case, will be to establish the major smoke leakage, thermal investigations as well as integrity condition.  Smoke leakage is usually the failure of an important element responsible for preventing gases or smoke from passing from one side to another side of the other.
Preview sample
Sedimentologic Controls on Reservoir Quality Engineering and Construction Essay
8 pages (2363 words) , Download 0 , Essay
Free
The above three factors are very critical when it comes to differentiating the formation of sedimentary rocks which include carbonate rocks, shale, and sandstone. Carbonate rocks specifically contain about 50% of the entire world’s Hydrocarbon preserves. Living things play a key role in the determination of the quality of the reservoir.
Preview sample
Waste Water Treatment Engineering Engineering and Construction Case Study
12 pages (3224 words) , Download 0 , Case Study
Free
Primary sedimentation tanks are designed to make the wastewater have the optimal speed for sedimentation. If the speed of water in the primary sedimentation tank is very high many of the particles in the wastewater may not settle because they lack enough time for that and therefore they can flow away with treated water. 
Preview sample
The Strategies for Improving the Image and Perception of the Construction Industry Engineering and Construction Literature review
13 pages (3540 words) , Download 0 , Literature review
Free
In addition, Emmitt and Gorse (2003, p21) cite poor communication as a source of conflict amongst the stakeholders in the construction industry. This report will, therefore, explore the triple aspects of conflict, gender, and communication among others in attempting to suggest the appropriate strategies that are needed to improve the image and perception of this industry.
Preview sample
Electronic Sensor Design Engineering and Construction Term Paper
6 pages (1688 words) , Download 0 , Term Paper
Free
The report will examine a variety of electronic sensor designs along with their practical application in electrical appliances. An electronic sensor measures some features of the world like sound, pressure, light, and converts that measurement in the form of an electrical signal usually into current or voltage.
Preview sample
A New Type of Battery Engineering and Construction Essay
15 pages (3970 words) , Download 0 , Essay
Free
Battery-powered technology is prevalent in almost every aspect of life today ranging from laptops, mobile phones, and even electric vehicle batteries. Almost every battery manufacturing company in the world is mastering the art of minimizing batteries while maximizing their efficiency and output. However, there is a significant difference between the electric vehicles due to weight to efficiency ratio, and weight-to-power ratio.
Preview sample
Nanotechnology and Future Networks Engineering and Construction Literature review
8 pages (2251 words) , Download 0 , Literature review
Free
Nanotechnology is a science and technology discipline that entails controlling matter on a scale between 1-100 nanometers. It is multi-disciplinary as it encompasses various fields for instance biosciences, physics, chemistry, mechanical, and electrical engineering. Thus, in the future nanotechnology will affect all these disciplines besides forming the foundation of future networks/networking. 
Preview sample
The Importance of Budgeting Within the Engineering Sector Engineering and Construction Report
7 pages (1904 words) , Download 0 , Report
Free
A plan which is designed to cater for finances by the engineers will be of great help to the engineering sector since it will help it to identify the sector’s interaction on how it invests guided by its financing decisions thus making the sector cope effectively with the changing times (Aman and Hildreth 2003).
Preview sample
Techniques Used in the Design of Parts of a Complex Electronic Product Engineering and Construction Report
10 pages (2812 words) , Download 0 , Report
Free
EMC plays an increasingly important part in the design of electronic products and systems. In this case study, the researcher would discuss the techniques used and best practices incorporated in the design of various parts of a complex electronic product to increase the chances of the final system becoming compliant with the EMC directive.
Preview sample
Restructuring the Abbey House into a State-of-the-Art Facility Engineering and Construction Case Study
11 pages (3243 words) , Download 0 , Case Study
Free
While the front and rear elevations will be retained, the building will be completely knocked down and redeveloped afresh.  It will include a basement area to house a new plant room and vaults; ground floor; and four upper floors for modern offices. Additionally, two passenger lifts and three shafts for service risers are proposed to be included.
Preview sample
New Technology Using Vacuum Collector Tube for Saving Water Engineering and Construction Research Paper
39 pages (11996 words) , Research Paper
Nobody downloaded yet
Recycled water defined as water treatment that removes unwanted impurities from wastewater to produce water suitable for a specific purpose such as irrigation and manufacturing, many techniques is used to recycle water such as purification using chemical and physical methods, filtration, distillation, and affinity purification.
Preview sample
Digital Signal Processing Engineering and Construction Report
5 pages (1536 words) , Download 0 , Report
Free
The term ‘Digital’ in digital signal processing straightforwardly refers to ‘numbers’ and in French, it is called ‘numerique’. A digital signal holds data in form of streams of numbers mostly in the binary format and the data in this form is processed by calculations. Digital signal processing has been a part of most electronic mechanisms.
Preview sample
Definition of Motor Vehicle Disaster Engineering and Construction Case Study
9 pages (2695 words) , Download 0 , Case Study
Free
In the recent past, the location of airbags in motor vehicles has continuously changed tremendously, this is mainly attributed to an industry trend to recess the driver’s airbag into the steering column, but this change has been slight with the average driver’s airbag being recessed only 0.2 inches below the pane of the steering wheel.
Preview sample
Electromagnetic Compliance of Electronic Products Assessment Engineering and Construction Case Study
8 pages (2055 words) , Download 0 , Case Study
Free
In today's expanding high-technology environment, technology product architects and designers are continuously being challenged by the issues of electromagnetic interference. This is because is not just because of ensuring that their products achieve optimal performance but also to achieve compliance with the current rigorous Electromagnetic Compliance (EMC) requirements.
Preview sample
Analysis of Geology of a Major Civil Engineering Project Engineering and Construction Case Study
6 pages (1789 words) , Download 1 , Case Study
Free
It can thus be concluded that geological engineering is an important part of the civil construction process so as to ensure that the impact of the construction can study beforehand, and suitable steps are taken to ensure that these concerns are addressed to avoid problems and complications in the future. 
Preview sample
Health and Safety Legislation: CDM 2007 and the Duty Holder Responsibilities Engineering and Construction Term Paper
7 pages (1981 words) , Download 0 , Term Paper
Free
In CDM 2007, duty holders are advised to take all necessary action to control the risks. For this reason, they are more accountable for the standard of health and safety applied to a project. In other words, when an accident occurs as a result of negligence or breach of the CDM 2007 Regulations, all duty holders are legally liable. 
Preview sample
Explain The General : Principles Of Risk Management/assessment ,to Identify Various Sources Of Risk Engineering and Construction Essay
5 pages (1476 words) , Download 0 , Essay
Free
TITTLE : XXXXXXXXXXXX@ 2009Risk managementThe management of risk has been an issue of significance in the recent past. It has been a common practice that projects are being shared by multiple parties especially in the construction industry whereby
Preview sample
Elasto-Hydrodynamic Lubrication Friction and Visualization Test Equipment Engineering and Construction Research Paper
24 pages (7392 words) , Research Paper
Nobody downloaded yet
Various algorithms to open signals established in literature were trialed. Also, a custom resolution that coalesces a typical incorporation method for the stage derived with transformational coordination was executed. Even though this was performed, a more refined phase opening of the algorithm is essential to augment the opportunity of appraising.
Preview sample
Equipment to Measure the Static Coefficient of Friction Engineering and Construction Term Paper
26 pages (7018 words) , Term Paper
Nobody downloaded yet
When a person pushes an object like a wooden block on a smooth steel sheet the exercise is very easy, whilst in the case of a wooden sheet the activity is deemed to be more difficult and cumbersome, but if one pushes some wooden sheet on a road surface the whole endeavor becomes even more difficult.
Preview sample
The Test Equipment for the Cam Follower Engineering and Construction Case Study
21 pages (5241 words) , Case Study
Nobody downloaded yet
The replicable motion depends on the complexity of the shape and hardness of the cam. Cam follower systems contain specific shapes for specific types of motions. The teardrop shape or teardrop displacements motions are obtained by the cam follower systems used in the pistons of the vehicle engines. The fast upward downward motion causes the other piston to catch spark to run the engine.
Preview sample
Tests on the Rig and Assess the Performance in Terms of the Pressure Losses around the System Engineering and Construction Research Paper
24 pages (6254 words) , Research Paper
Nobody downloaded yet
The tests on rigs are the chief activity in the whole mechanism and are carried out for a period of three days during the implementation period. These tests are generating relevant data relating to the internal as well as external systems of the overall implementation mechanism for the conduction of the experiments. 
Preview sample
Design and Development of Superior Heat Exchangers Engineering and Construction Research Paper
23 pages (6142 words) , Research Paper
Nobody downloaded yet
The designing and manufacturing of superheat exchangers is completed in the shape of a project with a set of activities as the subcomponent of the overall designing and manufacturing process. The overall heat transfer mechanism works under the standard conditions of temperature and pressure with internal energy to maintain a thermal equilibrium between the two divergent systems.
Preview sample
Demonstrating Turbulent and Laminar Flows Engineering and Construction Research Paper
30 pages (8264 words) , Download 1 , Research Paper
The equipment employed in this experiment is simple and valid as the apparatus is readily available. This will enable in discerning the flow patterns as one regime changes to another. Reynolds used a tank that was arranged in a way where a tube was used to draw water in the middle of the reservoir into which he had added a colorant via a needle. 
Preview sample
Building Analysis on Savil Building by Glen Howells Architects Located at the Great Park Windsor Engineering and Construction Case Study
7 pages (2089 words) , Download 0 , Case Study
Free
It could be observed that concerning Savil Building, the aesthetic of presentation of the building actually got along well with the location where it has been situated. Through improving the entire landscape of the park, the building actually creates a fine presentation of the area whereas it obviously makes it possible for the visitors to feel as if they belong to the landscape itself.
Preview sample
Introduction to Materials, Tribology and Surface Engineering Engineering and Construction Assignment
22 pages (6069 words) , Assignment
Nobody downloaded yet
Recycling steel is cheaper than iron ore and it is easy to manipulate the old steel to form new steel through the production process. The advantage of steel is that no physical properties are lost when recycled and that has helped to reduce energy and material requirements when compared with iron ore refinement. The annual energy consumption can be reduced by 75% when recycling is done.
Preview sample
A Pinplate Engineering and Construction Essay
5 pages (1595 words) , Download 0 , Essay
Free
The pin plates are designed in the form of devices that include a pin or pin plate in such an arrangement that is connected in a rotary mode and is connected to a cover plate, preferably with the use of a ball and socket joint. The pin plate, which is connected to the cover plate, is in a position that can be inserted into the gap and the cover plate with the adjacent surfaces, thereby covering the whole gap structure.
Preview sample
Making Bearing Housing Engineering and Construction Case Study
5 pages (1446 words) , Download 1 , Case Study
Free
A bearing house poses the qualities like a rigid, strong, inexpensive, and lightweight bearing housing to accommodate the bearing in ease and comfort as per technical specifications of both the bearing and bearing housing. To meet all these requirements, the housing is shaped in the form of a tube with a central rectangular cross-section to accommodate the structure within it as the bearing.
Preview sample
The Processing and Implementation of a Manufacturing Plan Engineering and Construction Essay
6 pages (1610 words) , Download 0 , Essay
Free
The manufacturing of the final product needs the processing and implementation of a manufacturing plant with all its necessary details. These steps include designing the wheel center with their sizes, use of the data as an input into the CNC machine, use of raw material, execution of the plan and the product.
Preview sample
Premount Base Engineering and Construction Essay
8 pages (2131 words) , Download 0 , Essay
Free
The machining process is one of the most important material removal methods used during the manufacturing of the paramount bases of the engines. The process is completed with the use of material-working processes in which power-driven machine tools such as milling, lathes, and drill presses are used with a sharp cutting tool to mechanically cut the material to achieve the desired geometry of the product.
Preview sample
Analysis of a Typical Stub Shaft Engineering and Construction Term Paper
10 pages (3060 words) , Download 1 , Term Paper
Free
Numerical control is the automation of the machine tools that are functioning with abstractly programmed commands in the encoded shape of a storage medium. The first NC machine was manufactured in the 1940s and 50s, based on the existing engineering tools that were modified to follow points as were fed into the system on the paper tape mechanism.
Preview sample
Metallurgy and Manufacturing Engineering and Construction Coursework
11 pages (3146 words) , Download 0 , Coursework
Free
Objectives: - for each machining process/operation: describe/sketch the work holding strategy; - for each machining operation: to identify the manufacturing parameters where appropriate; - to write the NC program of CNC machining of the component using ISO G-code, which should be able to run in the CNC machines in the manufacturing workshop.
Preview sample
Analyzing and Formulizing the Manufacturing Processes for the POOPSTA Engineering and Construction Case Study
15 pages (4009 words) , Download 0 , Case Study
Free
This report answers the entire question abbot the manufacturing of a good quality poopsta (André Shalom, 2007). However, it is suggested that during the manufacturing process of poopsta all the environmental concerns like air, water, and soil pollution. This should be kept in mind and all the social corporate responsibility towards education.
Preview sample
The Airport Traffic Control System and Its Elements Engineering and Construction Report
7 pages (2040 words) , Download 2 , Report
Free
The ATC involves various elements including communication equipment, procedures, and facilities. The communication apparatus entails navigation/communication equipment, transponders, radar, and Mode C/Altitude Reporting. The report has indicated that communication facilities consist of Airport Traffic Control Tower AFSS, Air Route Traffic Control Center, and Terminal Radar Approach Control.
Preview sample
The Main Bearing of a 2MW Direct-Driven Horizontal Axis Wind Turbine Engineering and Construction Term Paper
14 pages (3859 words) , Download 0 , Term Paper
Free
The study will help all the interested parties to formulate necessary guidelines for future products especially in the field of renewable energy as wind energy to meet the emerging needs of future generations in the field and designing and manufacturing of the bearings will be handled with ease and effectiveness.
Preview sample
The Chassis of a Typical Motorcycle Engineering and Construction Term Paper
15 pages (4065 words) , Download 0 , Term Paper
Free
The manufacturing and marketing of the component are essential for the running of the vehicle in the changing world with the rapid pace of development during the twentieth century. The manufacturing process needs the special attention of all the stakeholders for the designing, manufacturing, and utilization, and after-sales services for the product
Preview sample
The Connecting Rod for a Typical Passenger Car Engine Engineering and Construction Term Paper
14 pages (3841 words) , Download 0 , Term Paper
Free
Automobiles have changed the world during the twentieth century of the modern world in the developed world including the United States of America and other industrialized nations of the world with the provision of easy and accessible modes of transportation in the form of automobile cars. The introduction of these types of vehicles has also changed the landscape in the shape of a network of roads.
Preview sample
Electrical Wiring for the Lighting Circuit Engineering and Construction Assignment
6 pages (1491 words) , Download 0 , Assignment
Free
Both switches have a live wire and a switched live wire. As soon as the switch is put on, the connection is made between life and switched live wire. Thus this makes the circuit complete and the current flows through the circuit. The bulb glows up. A fuse is used in the active line of a circuit, to protect the circuit from the possibility of a current surge.
Preview sample
An Electrical Wiring Diagram for the One-Way Lighting Circuit Engineering and Construction Assignment
5 pages (1496 words) , Download 2 , Assignment
Free
The switch contains a live wire and a switched live wire. As soon as the switch is lit on, the connection is made between life and switched live wire. This in turn makes the circuit complete and the current start flowing through the circuit. The bulb glows. A fuse is placed in the active line of a circuit, to provide protection by fusing a wire in case of a short circuit.
Preview sample
1701 - 1750 results of 5601 items
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us