Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
Nylon has proved to be widely used plastic because of having extreme strength, being wear-resistant and also its self-lubricating properties. The material is also characterized by being resilient, nonmarring, has high impact resistance, with a continuous operating temperature of about 180º F, and it is also lightweight.
The con rod is manufactured by sand casting, while the turbine blade is manufactured using investment casting. The chisel is manufactured by steel forging process, tempering, and then quenching in oil. Fabrication of component E affects the grain structure of the welded part such that, the welded region is characterized by larger grains.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
The broaching process entails a series of cutting teeth that remove a portion of stock on the work-piece as the broach moves through the workpiece. For precise tolerance, both roughing and finishing were combined in one operation during the creation of the keyways shown in the figure below (Today's Machining World, 2009).
The sixth step involves using an electric current to dissolve alumina using electrolytes. The pure aluminium is received at the bottom of the chamber. The seventh step is whereby; the collected aluminium is put into crucible dishes and is transferred into the furnace where the heat is set so as to make the aluminium foils.
Lathe machine is designed specifically for sanding, cutting, turning, and grooving materials with relative hardness. They are applied in a wide range of uses due to their inherent versatility and have the ability to machine a number of materials. The machine eliminates or gets rid of materials from a rotating workpiece.
The procedure is interdisciplinary in nature and integrates the knowledge of computer science and control engineering to industrial processes. A system of process control in engineering supervises the manufacturing environment and controls the flow and processes electronically or mechanically. Controls are undertaken at every stage as designed and set by the users of the system.
Waste in the manufacturing process can be defined as any operation process that does not add value to the customers. Lean manufacturing aims at removing or eliminating or reducing such processes in the manufacturing procedures. The wastes can be summarised into seven types. First is the over-production which entails the product made for no particular customer.
The paper "Automobile Transmission" is a good example of an engineering and construction coursework. The system will have proximity sensors to follow the car in-front, monitoring systems to evaluate driving conditions and limit peak speed appropriately, and the ability to self-test and ensure that the car is in a safe state to drive before engaging.
The refinery is Australia’s largest crude oil refinery and offers fuel requirements for the majority of Western Australians and across Australia. BP Kwinana is considered one of the most contemporary refineries in the Southern Hemisphere after major upgrades and investments. BP Kwinana has implemented numerous process control systems that have led to cleaner fuel production.
In this research, we investigated how strategic maintenance systems help construction organizations build sustainable buildings, the benefits of implementing strategic maintenance systems, the principles of strategic maintenance systems, and the challenges that are faced in implementing strategic maintenance systems in buildings.
It is from the baseline that the braking performance of an autonomous vehicle is very crucial especially if the terrain and the surfaces are somehow ambiguous. Issues of wheel slippage have been for a long time been a nightmare to most designers with very minimal applicable solutions realized. This report comes up with a unique brake system model that applies the concept of feedback control.
The current progress can only be related to the theoretical review process that has begun and is on-going. The data will be beneficial for the second part of the project, which involves the practical experiments using model one, two and the CFD simulations. The results will be beneficial on the efficiency of separating sand from storm/wastewater.
A Computer Numerical Control (CNC) is one in which the functions and motions of a machine tool are controlled as a result of a prepared program containing coded alphanumeric data. 3 axis CNC mill is rapid prototyping technology for cutting materials that are often quite forgiving such as rigid foam or insulation.
14 pages (3822 words)
, Download 1
, Research Paper
Free
The A8120 series belt conveyors are considered a heavy-duty conveyor that has the capability to deal with a number of applications in different industries based on its robustness. The A8120 are manufactured through the usage of the extruded aluminum steel with skid beds and 113dia drive drums.
Studies on the prediction of vehicle interior sound quality have been done for a long time and the outcomes of these studies can be categorized into machine learning-based and psychoacoustics based methods. According to Huang et al. (2016), two psychoacoustics based method exist, which are an octave band based analysis and the critical band based method.
Material selection is the most important factor of any engineering design process. Correct material selection is extremely important for the reliable performance of a product or machine. The process of material selection is a complex task, regardless of whether the material of concern is metal, plastic, wood, or stone
Engineers are expected to work towards ensuring accidents in industries are eliminated through discharging their job obligation while considering safety issues. The work of engineers is crucial and it has a major role in making sure that their operations prevent the occurrence of accidents.
The materials, selected for analysis, are metallic, ceramics, composites, and polymers. Each category was discussed against the component that they make in the auto industry. Thereafter, the report provided criteria employed by manufacturers, designers, and engineers in the selection of materials.
The specific function of the product is for packaging and dispatch purposes. That is the main purpose of the installed product, which presents it meets the customers’ requirements.
Material: it meets the customer requirements through the heavy-duty materials that brand it as a heavy-duty and reliable product. It contains a metal frame and rollers at the ends.
10 pages (2820 words)
, Download 0
, Research Paper
Free
Due to the rapid population growth, there is a challenge in meeting human needs because of the scarce natural resources that are available. This is where the engineers come in in the development of technologies to try and balance the sustainable use of resources while at the same time meets the needs of society.
The heat exchanger acts as an intercooler. Intercoolers make charged air denser, promoting more intake into the engine due to forced induction. Intake of denser air also eliminates the risk of pre-detonation of air/fuel charge prior to spark ignition (Granet & Bluestein, 2014). This increases the efficiency of the engine’s ignition system.
Steel is the most common metal on the planet earth. It has unlimited applications due to its properties which makes it withstand stress beyond which other metals could endure. It is for this reason that steel is used to make the bars upon which the roast is to hang. The frame of the system, the base and the turning mechanism is also made of steel.
The blocks of the engine and pistons are casting, the materials used are mainly aluminum. The sterling cycle of the engine has two piston cylinders, a heat regenerative exchanger, a combustion chamber, and a crankshaft among other passageways for the fluids that make the operation effective.
Brasses classified as cod working are those that demonstrate an increased hardness. They are also known as alpha brasses Since the hardness has a direct proportionality to the yield stress of brass specimen, the yield stress also increases with an increase in the extent of cold work. Brasses classified as hot working are also referred to as duplex brasses.
The essay presents some of the properties and structure factors of stainless steel to understand the factors that influence their maintained structure and stainless appearance. Stainless steel's main defining factor is that they all have a certain level of chromium, where the steel with the least chromium has about 10.5 percent within its steal.
Hydraulic gear pump operation is the alteration of hydraulic energy (Doddannavar, et al., 2005, 43). They pump by generating a space, which supports the fluid undertaking into and out of the pump using high pressures (Turolla, 2010). It provides pressure balance on the gears with the support of the plates providing the sealing.
8 pages (1993 words)
, Download 0
, Research Paper
Free
The cruise ship-design project is expected to be successful at enhancing the construction and design of ships that will ease the practice of evacuation. The cruise ship design will also enhance and improve passenger understanding of what to do during the evacuation process. The project will be effective after a short period.
In a case where we have a tire-coupled test rig, each actuator will support the vehicle under each tire. In the case where there is spindle coupling, there is mounting of each of the spindle directly on the actuator. This makes it possible for the test rig to input signals into the vehicle with the responses being measured.
The suspensions refer to the interconnections of the vehicle parts such as the stabilizers, springs, as well as shock absorbers and wheels to enhance the comprehensive purpose of car road-holding. The suspension system is pragmatically positioned to support the cars driving pressure and compromising the instability that is prompted by the road vibrations.
13 pages (3449 words)
, Download 0
, Research Paper
Free
Contemplate the performance of motor vehicles normally think about horsepower, high acceleration, etc. However, the entire energy generated by the piston engine serves no purpose if the car has poor control. This explains the reasons regarding the intense concentration on the suspension system following the invention of the four-stroke combustion engine.
Numerous stages exist in the equalization process. The first step is the verification of the battery that is flooded in type. The second approach is the removal of all the loads from the battery. The third approach is connecting to the battery charger (Kadirvel et al. 2012). The fourth stage is setting the charger for the equalization voltage process.
The Bosch fixed displacement gear pump Model RE 10213 is low cost, rugged, and has a capacity of 3500 psi operating pressure and their displacement is fixed. They have rotating gears to help in the production of flow. As such, the thrust generated by the pump depends on two basic things, which are the speed of the gear and the mass of that fluid to be pumped.
6 pages (1819 words)
, Download 0
, Research Proposal
Free
Generally, the plan would be made, as per the project purpose and after the approval of the plan, the construction team would be required to follow the specific plan. There would be the conduct of surveys and inspection of the project deliveries to ensure that they match with the company’s project objectives.
The metacentric height (GM) is used to measure the initial static stability of a floating vessel. A larger GM indicates that the vessel has better initial stability against capsizing. The commonly accepted method to obtain an accurate assessment of the vessel’s initial GM is the inclining experiment, which is carried out after the vessel is fully built.
Water transportation pipelines are maintained by replacement of anode and cathode protection, the remedial burial of pipelines, mattress laying and dredging operations. A pig is a useful testing device for hydrostatic pressure in a pipeline, and to check for crimps and dents on the sidewalls, and carry out periodic cleaning as well as other minor repairs.
Navy architecture can be done with a "pelvic ship model". In this process, the technical drawing and the ship's blueprint are translated into templates that facilitate interpretation when designing a ship. Nowadays, thanks to constantly developing technologies, more advanced and complex software such as car maps have been developed.
The use of machines is vital in ensuring that activities are carried out within a short period of time. Adequate human resources are also required in order to ensure efficiency in the management of the activities in the critical path. Wastage of resources including the materials should be avoided during the project.
Fire fighting in marine has become a serious issue to be dealt with in order to minimize the causalities during such accidents and loss of valuable goods. The research work is about identifying suitable fire detection mechanisms and extinguishing forms which will help easily deal with any arising fires effectively.
5 pages (1599 words)
, Download 0
, Research Proposal
Free
The paper “Earthquake-Proof Pipeline Modeling” is an affecting example of a research proposal on engineering and construction. The aim of this proposal is to design an Earthquake proof pipeline to transport oil and gas between countries as well as across the sea. The design in place signifies the two pipelines as a single unit with one diameter, which is the sum of the diameters.
11 pages (3293 words)
, Download 0
, Research Paper
Free
Facility management, strategy, and maintenance policy for buildings, performance management, and strategic management are the operational and strategic factors that influence the management of the operation. Managing the operation process of building maintenance is the goal of providing users and building customers with an improved built environment.
An adjustable immersion hydrometer is a tool, centered on the Archimedes Law. The tool according to the law assists to regulate the liquid density. The hydrometer utilized to calculate the water density where the ship floats are typically made through materials that are not easily corroded.
When using regular routes, the GHG emitted by the warehouses is higher than when express routes are used. The delivery of parcels took place in several routes, the first route was the highest emitter of Ghione it involved a large and small warehouse in the delivery process as presented below in the experiment results.
13 pages (3474 words)
, Download 0
, Research Paper
Free
The swimming pool act of 1992 mandated that all pools that have children using them should have child-resistant barriers that surround the pool. Swimming pools were required to erect walls that would surround it and have an access point. The walls made sure access was only granted to the users of the swimming pool and not unauthorized people.
The hydraulic transmission system is one of the popular ones where fluid coupling performs the function of the frictional clutch in a manual transmission system. This reduces the frictional losses experienced allowing more power, torque, and speed transmission levels at an economical value. As a result, the modern automatic transmission edges out the manual.
Some of the energy is lost during the healing process and use of the machines and improving the efficiency through processes similar to turbocharger system or other storage mechanisms. Mobile phones, the energy produced through pressing the keys of different technological products such as automated machines also produces some forms of heat.
The calculation is aimed at evaluating the accuracy of the budget estimates, they also give insight into the right implementation plan. Projects are time-bound, they have a defined time frame within which they should be implemented, in order to have prior knowledge of when to commence and end the project, calculation of how long each activity takes should be carried out.
Plasma arc gouging is a technique of plasma arc cutting but for gouging, it uses different arc tip in order to cause a reduction in the constriction of the arc. A low arc velocity is produced due to the reduction in arc constriction. The torch arc is usually set at an angle between 30 and 45 degrees from the surface base.
the Contract, is to be attached to the General Conditions of Contractand shall be read as part of the Contract.Item1 Principal(clause 1)...Homeville children playing
Project management refers to the application of experience, processes, skills, methods, and knowledge to attain the objectives of the project. A project in this case refers to a transient, unique endeavor, carried out to attain planned objectives that could be described based on benefits, outcomes, or outputs.
16 pages (4716 words)
, Download 2
, Research Proposal
Free
The role of different government institutions is to develop the social and economic framework. An example of such developments in the infrastructure may include projects such as Melbourne-Sydney High-Speed Train. The current Sydney-Melbourne rail corridor is estimated at 960 kilometers and utilizes the technology of standard gauge railway.