Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
Key organizations involved in disaster management are Category 1 and 2 responders and also the voluntary sector. Category 1 includes emergency services, local authorities, NHS, and other agencies. This group is tasked with the primary responsibility to emergency disasters by offering first aid, evacuation, and treatment of injured persons.
A filter can be described as an electrical network which changes the phase characteristics and or the amplitude of a signal according to frequency. With them, it is possible to draw curves of gain versus frequency or phase versus frequency.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Generally, to most projects, most of the time the recognized means of knowledge and practices are applicable because of the consensus about their value and usefulness. Additionally, it enhances the chance of success over various projects since the application of the tools and techniques, and skills are often used.
Efficient energy housing topics are essential in the modern environment that is largely affected by the change of climate. There have been areas that have been experiencing excessive heat due to global warming, while others experiencing excessive cold. Summer and winter for many have been a challenge for many as the weather during these two seasons is usually extreme.
The first fluid has a lighter density with lower viscosity compared to the second fluid which has a heavier viscosity. In studying these fluids, we also look at the relationships between the Reynolds number and the Mach numbers of the two fluids across different sections of the S-bend curve (Versteeg, p. 56).
I used to believe that designing a smart home could result in higher energy bills, but chapter one enabled me to understand how careful consideration during the design stage could improve energy smart features without incurring extra costs. These features consist of correct home orientation as well as room layout, placing the wind appropriately
The project management stage begins with setting up a team that will carry out and delivers the solution to the project establishment. This team is given the task of collecting first of all data about the viable project construction site.
Having optimal access to solar could enhance the house dwellers’ thermal comfort, reduce greenhouse emissions, and decrease energy requirements. It is imperative to design the location of your building so as to realize an improved level of passable winter sun.
The jacks are readily available in the market however some of the designs available require a lot of energy making it difficult for women or weaker men to be able to use them effectively. This has led to the modification of the current jack systems to come up with a design considering all the human aspects regarding reliability comfort when using and the degree of easiness in their application.
According to Macdonald, (2003), concrete is durable if it has achieved the desired goal in nature of which it is uncovered. The strength of concrete materials can be restricted therefore of antagonistic execution of its bond network or total constituents under either substance or physical attack (Poupard et al, 2006; Prudon, 2008).
Today’s Creation Fabricators, (TCF) is a company that will aim at delivering a variety of fabrication work on windows and door products for a wide spectrum of clientele that includes homeowners and constructors with the main difference for our products bring quality and superb relationships with both customers and our suppliers.
The jute fiber is used in many industries today, which stipulates that studying its fracture performance was beneficial in showing the additional areas it could be used. It was selected for this process based on many more application issues named in the literature review. Through reinforcing it with the epoxy resin will brand it effective for application in many other areas.
In conclusion, polyamide 6 (Nylon) and polycarbonate have similar melting temperatures, but different glass transition temperatures because while Nylon 6 is a semi-crystalline polymer, Polycarbonate is amorphous. Hence, polycarbonate exhibits only one transition temperature i.e. the glass transition temperature.
The AMR decoder removes transferred indices that are delivered from the bitstream. The indices are decrypted so as to get the code amounts at each frame. These amounts are the LSP vectors, the fractional pitch lags, the ingenious code vectors, and the pitch and ingenious code vectors and pitch and ingenious advantages.
Good construction sites are almost impossible to achieve but doable(Hui2015,p 122). This is by coming up with measures that control and prevent pollution(Mishra 2017, p 40). One of the most important steps is to have the ability to prepare environmental risk assessment mechanisms that oversee all construction activities.
Maintenance is an integral part of any engineering system and is necessary to ensure the system operates at its optimum level. (Tomlingson, 2005) notes that maintenance takes up a significant percentage of operating costs, forcing senior management to focus their attention on this activity, with an aim of increasing the profits accrued by the company.
Due in part to their apparent simplicity, there is a latticework of pipelines traversing an unseen world beneath our very feet. Humanity’s relationship to the immense complexity of these structures takes a variety of forms; the reactions and effects of pipes on the lived human experience is shaped by how visible (or invisible) these pipes are to a critical human gaze.
The following are characteristic composites; mortars, reinforced plastics, metal composites, and ceramic composites. Such composites are generally used in the following areas, the building of; swimming pools panels, bridges, boat hulls, bathtubs, race car bodies, shower stalls. It is also used in aircraft and airspace due to its strength, lightweight, and durability.
13 pages (3463 words)
, Download 0
, Research Paper
Free
The research questions the research would be answering are among others to develop an engine that is able to take-off faster and take a shorter time to reach its maximum speed of flight (Klees 1974). To design an engine that is able to reduce fuel consumption and provide increased efficiency of the engine.
The energy demand is rising at a rapid rate. The World Energy Technology and Climate Policy Outlook predicted a standard development rate of 1.8% for every annum for the years 2000-2030. The 65% of energy demand is met fundamentally by non-renewable energy sources. The utilization of these causes releases of different pollutions and greenhouse gasses.
The pump effectively changes one form of energy into another and this second form is responsible to make the liquid flow. The simple working principle of the pump involves a motor; the liquid uses this energy and flows into the impeller of the pump; this centrifugal force of the impeller helps to increase the velocity or flow rate of the fluid.
12 pages (3245 words)
, Download 0
, Literature review
Free
Apart from the dangers exposed to the public, construction activities also have several impacts on the environment. According to Shen and Tam (2002), the construction sector is one of the largest contributors to the deterioration of the environment as the sector is among the leading sectors in terms of the exploitation of ecological resources.
10 pages (2841 words)
, Download 1
, Literature review
Free
A second garage was opened in 1902 City, whereby a Westminster-based building was converted into a car park and could hold at least 230 vehicles. Still, Hotel La Salle’s car park is the earliest recognized multi-story car park, which was constructed in downtown Chicago in 1918.
The volume of liquid (VOF) idea is then used to track the free surface interface and to remake geometrically its area. The VOF technique comprises of three fixings: a plan to find the surface, a calculation to track the surface as a sharp interface traveling through a computational matrix, and methods for applying limit conditions at the free surface.
The main objective of the exercise was to develop a control system that can be used to balance an inverted pendulum. A cost-effective means of conducting the test was to use software that was designed economically and used in tandem with the mechanical and hardware systems. The results of the exercise should be a system that has the ability to balance an inverted pendulum which in itself is an inherently unstable system.
To counter the costs related to the installation and maintenance of wind power technology, it is important to note that numerous efforts have been made to ensure its survival. There has been a continuous level of efforts that have been made in relation to the provision of easily accessible financial incentives to encourage its expansion strategy (Gu et al 337).
I was able to learn that even when it is cloudy or post-sunset, storage systems can be integrated into CSP power plants that store heat involved in power generation (Harsha 6). A fluid with high thermal capacity stores the heat from the concentration when there is the sun. The capacity factor of the CSP plant is thus improved.
The pressure defect at the back of the cylinder tends to “fill up” with blowing, leading to lower transverse static pressure gradients in the near wake. This implies that complete blowing is of interest to the wake control (vibrations, suppression of the shedding), the thermal protection, or for the reduction of the viscous drag.
The Rudd-Gillard government through the Green Car Innovation Fund that was established in the year 2009, offered financial aid, particularly to the automotive industry. The Green Car Innovation Fund promised a whopping $6.2 billion of financial aid to local firms in the industry in order to help local firms integrate technological innovation in car manufacturing.
6 pages (1726 words)
, Download 0
, Literature review
Free
The presence of these policies has seen the relocation of firms to other regions with flexible terms and less competition. Australia is indeed one of the nations with strong labor unions which advocate for increased labor cost in response to the rising inflation. However, high labor cost fails to attract investment in automotive industries, especially when countries like China offer cheap labor.
19 pages (5687 words)
, Download 0
, Literature review
Free
When hydrogen is burning to produce energy, the only noticeable emission is water vapor. Many types of research are currently undertaken to investigate how the gas can be stored for energy production. A solar-hydrogen system can provide the means for a totally emission-free method of producing hydrogen.
The paper "Collapse of Car Manufacturing Industry in Australia" is a great example of an assignment on engineering. The car manufacturing industry in Australia came to being almost 100 years ago. It was a major contributor to the Australian economy with over 400,000 workers employed, directly and indirectly over a range of sectors.
The unions have overtly challenged any changes and reduced to negotiate, instead of pursuing the court process to the detrimental effects to the car manufacturers in light of reduced sales [8]. These organizations, for example, Toyota, have not broken through the industrial relations issues that would help them stay in the market.
The forward bias of the circuit designed is perceived when electrons flow through the diode, due to its polarity. If electrons cannot flow through the diode, the backward bias is experienced as the diode blocks currents. The diode as presented in the circuit used functioned as a switch when closed leading to the occurrence of the forward bias
Recent case studies on projects such as Müller and Jugdev (2012) indicated that there is still a lack of consensus among project managers on defining whether such complexities have an implication on projects’ cost and time or it stretches beyond time and cost to other variables such as project quality, overruns and health, and safety (Teller et al. 2012).
Among the various other reasons for the failure of the collapse of the industry is that the Australian market for cars was very small. Following their small size, they were unable to exploit the economies of scale fully. Therefore, for the industry to manage a remaining solvent, they had no option aside from using foreign production inputs which are considered to be cheaper.
Elimination of protectionism, fluctuations in currency and industrial relations-unions, unions contributed a great deal to the closure because in having a hand in every factor mentioned. In conclusion, there is a substantive argument to conclude that unions played a key role in the closure of the firms in the Australian automotive industry.
Union activity prevented the industry from being more innovative hence competitive. According to, this problem was especially noted by Nissan’s management, which was always worried that unions pushed for restrictive and outdated work practices hence limiting flexibility. Bolt also observes that union militancy triggered the exit of Toyota.
Among the Middle East countries, KSA is the fastest-growing state in power consumption. In 2005, KSA was among the top 15 economies in consumption of primary energy, 60% of the energy came from petroleum, and 40% was natural gas. Electricity in KSA is under the ministry of oil and the Ministry of Water and Electricity.
These concerns have led to the development and utilization of alternative sources of energy. The main alternatives to fossil fuels are solar, water, biomass, and wind energy. This is because of the environmentally friendly nature of these alternative sources of energy. Another way has been to create catalysts that can reduce air pollution resulting from the burning of fossil fuels.
The automotive manufacturing industry in Australia comprises different firms involved in the manufacturing of motor vehicles, trailer and body manufacturing, manufacturing of automotive electrical components, and manufacturing of other motor vehicle parts. The industry includes numerous small-scale engine manufacturers.
Attempts to make the industry thrive have failed and even the remaining manufacturers such as General Motors Holden, Toyota, and Ford have since announced their exit by the end of 2017 [2]. While some market analysts argued that it was the trade unions, which caused the demise of this industry, others think otherwise.
In analyzing the requirements, other considerations include the appropriateness of the methodology employed, identification of hazards and harms, evaluation of risks, identification and prioritization of appropriate controls. Furthermore, discussions on the evaluation of the effectiveness of the processes towards advancing safe and healthy working conditions.
Laser welding has several disadvantages; the first disadvantage is the fact that laser equipment is very expensive. Amada Miyachi (2017) noted that the filler material is also relatively costly and must be used in most of the welding process. When welding, the weld position is very accurate and is controlled by ensuring the laser beam is focused.
General Motors Company uses sales and operations planning for benefits such as improvement of inventory management, increase promotion plans, increase accuracy based on budget forecasting, improving management process of a product's lifecycle, and having a great view of supply and demand across the company.
Australian assembling would need to depend totally on exports, which may be fine aside from Australian expenses are high and different nations have non-tariff and tariff barriers on processed imports. They are glad to purchase our assets duty-free, from which to make their own particular makes, yet producers are generally protected.
The Titanic disaster was attributed to the assumption that the ship had adequate safety features to protect it from sinking. This made the passengers and crew believe that the Titanic was unsinkable. However, the builders had compromised safety measures by changing the project scope to allow for the luxury and the first-class.
The car industry in Australia is effective, with a ready market base. The problem has been caused by many factors where the trade unions have played a significant role. The trade unions have influenced the fall of the local ca manufacturing industries, by giving the foreign importers more bargaining power in the country.
Generally, planning enhances communities and people’s overall well-being through the creation of more attractive, equitable, accessible, healthy, and efficient places to work, live, play and plan. Effective planning can as well create communities that provide improved choices for how and where people live and ensure that future generations are offered fair and realistic opportunities.
Summing up the report, it is clear that the availability of hot water is a necessity for many people. The ongoing invention of new technologies especially user-friendly technologies shows that the water heating department is getting the attention it requires. Problems though should be addressed so as to ensure smooth operation.