Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
Radar is used to detect an object that specifically uses radio waves. It is, therefore, used to determine or measure certain parameters like speed, altitude, as well as the range of objects. Objects such as missiles, weather formations, ships, vehicles, and aircraft among others, are some examples of such objects that are radar is used to detect.
Accordingly, prior methods of electrical generation and those that are still the most common with developed and developing societies around the globe are contingent upon the provision of electricity via coal plants, nuclear plants, hydro plants, and the less popular natural gas electrical plants.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
8 pages (2403 words)
, Download 2
, Research Proposal
Free
The importance of clean energy sources was realized rapidly after the adverse effects of the pollution caused by generators on the environment became apparent. Wind energy is a clean and renewable energy source whose applications exist worldwide. There are several forms of wind energy particularly in generating electricity.
A microprocessor is a chip found in the air conditioning control unit, which is used as a decision-maker. It is normally referred to as the brain of the system. The microprocessor helps in reading and writing the memory of the system, interpret instructions, and spend time to communicate with other parts of the system.
From the discussions above, an automatic system for car parking will give a cost-effective solution to the problems experienced in parking in the virtual world. This will also increase the area available for rent, give friendlier parking to drivers, and also reduce the cost of maintaining car parks.
Helen et al. introduced the SRWLI as another application method aimed at increasing the resolution of this approach by using the PSI. Additionally, the PSI method overcomes a limitation that requires fringes to have a carrier frequency to resolve the spectral phase slope and reduces the spatial variation in the interferogram background signal.
With regard to sub-grade strength evaluation, the Austroads normally carries out its assessment based on the California Bearing Ratio. CBR pavement design is one of the earlier design methods that did not initially involve traffic as one of its parameters and it is only through further improvements that traffic was included as a correction factor.
The Teton dam that was constructed in Idaho Town collapsed in 1976 while being filled; the dam was 405-ft high. Its collapse was noted to be one of the most known engineering disasters in modern history. The collapse of the dam resulted in an economic forfeiture of more than $1000 million and 30 mortalities at that time.
As can be seen from the calculations, the heat resistance is dependent on dimensions and therefore affects heat transfer by means of the variability of dimensions. The relationship is inversely related is if thickness increases the heat transfer decreases and vice versa. If the thickness is increased by 5% the heat transfer decreases by about 5%.
In the Maltese island, the biggest contractor has 20 employees, and they lack major pieces of equipment that can be used in the project. As a result, the demolition work will be conducted by a foreign contractor that employs adequate capital and also has to solidify its name as a professional.
12 pages (3549 words)
, Download 1
, Research Proposal
Free
The researcher will also conduct quantitative analysis while considering the quantitative information obtained from surveying the sample of 50 respondents from different construction and consulting firms. The analysis will be conducted using various statistical techniques, which include descriptive statistics and regression analysis.
11 pages (3301 words)
, Download 0
, Research Paper
Free
Naturally, many aspects of nature exposed to a material. Tensile, compressive, and shear among others are some of the forces applied in a material. These aspects are very crucial and vital in material selection for any design, especially in engineering. Cost is another factor that must be considered in material selection.
Some traditional industries remain in the area but however, this is considered as a zone of transition from which industrial uses should be encouraged to move to allow residential universities an business development. Adjoining the CIQ to the north is the Digital Campus which is an area that is designated for new business startups.
The spider silk fibre is also promising for applications in the aerospace industry given its high ductility that allows stretching of up to 140% its normal length and its excellent abilities to retain strength at -400C(Scott, 2014). These composites are then useful in aircraft’s wing joining where varying stresses are experienced.
14 pages (3689 words)
, Download 3
, Business Plan
Free
The firm established four strategic departments: the construction department, finance department, HR department, and the legal and compliance department. Each department has a separate set of goals and responsibilities. The construction department, which is the main department of the firm, will provide construction services to the clients.
6 pages (1844 words)
, Download 0
, Literature review
Free
Hence researchers have been required to draw conclusions based on experiences of the past, considering the likely outcomes of installation of piles in certain conditions of soil, such as the granular soils. As researchers could obtain from their studies, there is an “appropriate relationship between drilling resistance and pile strength”.
The definition that adequately fits the term sustainability is the aspect of equal share with regards to how opportunities and resources are distributed. It is categorized as either tradition criteria where it is defined by cost, quality, and performance and sustainability criteria in which it is used to refer to.
The author describes how to back up power supply in a television set by creating an in-built power backup system that automatically switches over through an extra fast transfer switch to an inverter which continues to supply power to the television set. The blackout period might vary depending on the location and the urgency of the power company.
The crack growth rate for creep is characterized by the presence of transgranular patterns regardless of the temperature changes involved during the process. However, as time progressed the trend in crack growth for creep became essentially intergranular and depicted differing patterns in comparison with the fatigue sample.
This is the simple arrangement that enables the explanation of the operation of the master cylinder towards the halting of vehicles. The master cylinder starts and spreads the breaking effect to the pads located in the wheels of the vehicles. It operates a dual braking system that ensures that the failure of a system does not sabotage the whole system.
Lighting practitioners have thrilling possibilities that are offered by HLS. They include- human response study in relation to hybrid lighting; developing a suitable design expansion criterion; design methods development; daylight guidance feasibility in various geographical areas; and economics that is long term for such systems.
A process control system monitors a water treatment environment and it electronically controls the process on the limits that are determined and set by the operators. The controlled system is usually part of the plant in which the controlled variables must be determined at the desired value and variables.
The key content of this letter is about the Jiff production plant based in Lexington, Kentucky. The paper offers detailed coverage about the security officers as well as equipment monitoring process in the firm. The main building is greatly enhanced by security gadgets owing to the delicate nature of the products that the firm is dealing with.
The green structure has a primary goal of promoting efficiency in the utilization of water and energy, which are the main input inventories. Use of day-lighting, high-performance windows, insulation, renewable energy, and installed mechanical efficient systems, they contribute more than 30% energy savings compared to conventional buildings.
The backhoe pulls material towards them, thus they need the lowest radius for their effectiveness; hence minimum force and power is needed, unlike the front shovel which lifts with maximum radius. The backhoe has a better capacity during the loading of trucks because it dumps materials in an organized manner; hence reduces the truck wear.
However, engine oil plays an important role it acts as a crucial element that removes excess heat from the cylinder liners of the engine. The life of engine oil is measured in kilometers or miles, whichever distance a vehicle has covered. Engine oil needs to be replaced at regular intervals as per the manufacturer guidelines attached to the engine oil.
Based on research by Murali et al., (2007) various factors lead to disagreement amongst parties involved in construction projects, these include; communication breakdown, unsettled issues with the society, unpredictable problems within site conditions, and issues on payment for the already completed project, unapproved construction methods.
The results indicated that induced voltage gradually began to decrease with the increasing load. In this regard, it can be concluded that in a single phase induction motor, any
That disasters happen is an indisputable and obvious fact. Natural disasters are a testament to the imperfect state of nature and its forces while man-made disasters underscore the fact that man’s work cannot be completely perfect. One of the most memorable artificial disasters of the late 20th century is the Sunshine Skyway Bridge Disaster.
The RS decoder corrects a maximum of terrors and a maximum of 2t erasures (Brown & Vranesic, 2009). The erasure information is provided by the demodulator in an electronic communication channel. The demodulator serves the purpose of flagging the incoming symbols, which it suspects to be containing errors.
Power amplification is the final stage of the radio frequency signal transmission process. The power amplifier strengthens the radio frequency to enable long distance transmission through the channel.Transmission of the radio frequency over long distances requires strong signals of since it is difficult to transmit weak signals over long distances
8 pages (2323 words)
, Download 1
, Research Proposal
Free
The normal office building design also applies in shopping malls and stores, which give a variety of products and services, availed to the consumer. This makes shopping an exciting experience for any person. These shopping centers and this building have diverse stores like the grocery store and other types of stores.
11 pages (3112 words)
, Download 1
, Research Paper
Free
A number of tools and programs have been put into place thereafter so as to encourage all the stakeholders and the general public on the implementation of energy efficiency. It has been observed that non-air-conditioned buildings tend to perform much better than air-conditioned buildings and this awards them a better Energy Performance Certificate (EPC) rating.
The reliability and validity level of the data gathered from the field will be ensured by making a comparison between the primary data sources and secondary data sources (Campbell & Fiske 1959). These will illustrate clearly any differences in theoretical and practical energy-saving and analysis approaches for commercial buildings.
Soap manufacturing plants must work hard to ensure energy efficiency. Several energy management efforts can be employed by the hand soap manufacturing plants. To begin with, the plants should install energy-efficient control systems and lightning. The plants should have energy-efficient lighting policies that they must strictly adhere to.
The steel metals are used in the design of the base and top link because they are the points that receive the maximum load. This is because they have higher tensile and yield strength compared to aluminum. The wrist tubing is designed by the use of aluminum. The representation below summarizes the outline working of a polishing robot.
Initial protocols showed that water supply provisions within the region lay majorly on both District and Mandal levels. Projects, which are approved at the district and regional levels, subsequently encompass individual villages as showcased by the Alimenti Madhava Reddy (AMR) Water Irrigation Project.
Through the existence of WiTricity Corporation, the U.S. government can directly manipulate the entire world market of electronic gadgets in the near future. In the absence of free-market competition, the mere act of manipulating the entire global market can be very damaging on the part of the public consumers worldwide.
Various advancements are being undertaken in the marine engineering propulsion designs. Future machine designs offer efficiency gains over modern existing technologies. The current two-stroke system could undergo some significant engineering improvements that will result in better and more efficient production.
10 pages (3036 words)
, Download 0
, Literature review
Free
The consideration comes because air is available and abundant without any cost, and there are existing infrastructures that can assist in the early adoption, there are mature supply components or chains, storage of liquid air occurs at relatively low cost and safe low pressure, and there is no risk of combustion of the fuel (NC State University 2014).
The discussion henceforth focuses on examining the different causes that led to the accident and the active role taken up by the crew members under the immense pressure to safeguard the life of as many on-board travelers as possible. Correspondingly, the character of DC-10 flight training instructor has been considered in this discussion to obtain a critical perspective on the issue.
12 pages (3483 words)
, Download 1
, Research Paper
Free
The study of civil engineering in often cases introduces students to several aspects of learning, one of which is the concept of highway engineering. With likely regard of it as a branch of civil engineering, highway engineering may be categorized into the most important stages of planning, design, building, and the preservation of highway roads.
14 pages (3949 words)
, Download 1
, Research Paper
Free
Once road construction projects take place, they do so with the future generation in mind. This is because it is only through this that highways that are constructed today can last longer and be of relevance to unborn generations, serving their needs in transportation. No matter how careful estimation may be done, achieving accuracy is almost impossible.
The technical report uses both the Google Map and the Auckland Council website to choose the anticipated route. The paper investigates information on the soil type along the alignment of the highway. Choosing the correct route, a map with contour lines will be of help in finding the correct vertical or horizontal.
Auckland is a city that is located on the North Island of New Zealand. Auckland is the most populated area in New Zealand with a population exceeding 1.4 million people. The population of Auckland city is approximately 32 percent of the total population in New Zealand indicating that it is among the most populated cities in New Zealand.
8 pages (2197 words)
, Download 0
, Research Paper
Free
The section is densely populated and the main inhabitants of the main being Europeans of British and Irish origin and other communities from different regions. This is an urban area that has trade and other commercial activities as the main way of life. The section is mainly composed of chert and argillite rocks which are of volcanic origin.
The lighting system in the building should be refurbished to have components and materials that have less energy consumption and less. Such devices will reduce heat lost through the heating effect thus leading to more efficiency of the system and hence promoting sustainable surroundings (Wingfield, 2010).
Single-Phase Induction Generators are simple AC motors that employ the principles of induction to derive their power (asynchronous power generation). The use of induction motors as generators is currently one of the most cost-effective ways of generating electricity from wind turbine systems and other common applications.
There are several remarkable mechanical engineering accomplishments as selected by the American Society of Mechanical Engineers, ever since it started the program in the year 1971. This selection is bestowed to existing systems or artifacts signifying an important technology in mechanical engineering.
The first construction of the bridge was a failure as it collapsed and killed all people who were on the train that was passing across the bridge. The determination of building the bridge is seen when the constructors did not give up and made a major accomplishment in 1990 when the opening of the bridge was officially launched.