Our website is a unique platform where students can share their papers in a matter of giving an example of the work to be done. If you find papers
matching your topic, you may use them only as an example of work. This is 100% legal. You may not submit downloaded papers as your own, that is cheating. Also you
should remember, that this work was alredy submitted once by a student who originally wrote it.
From Universidad de Cantabria (29), the application of microcontrollers in spacecraft is favorable as a way of cost reduction since it involves the incorporation of numerous peripherals on a one-chip thereby, reducing parts counts. This integration results in the reduction of power consumption, volume, and mass while increasing reliability.
Microcontrollers are used in creating spacecraft devices, and robots for developing new territories. In particular, controllers are used for automating the utilization of resources and for site preparation of the lunar surface. A complex control system using Artificial Neural Tissue architecture was developed for controlling excavation tasks for groups of robots.
Preview sample
sponsored ads
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
The emergence of highway technology can be singled out as one of the technologies in the world that has had, and still does, significant, profound, and far-reaching socio-economic, cultural, and even political effects. Highways have improved society in many ways especially in the transportation sector.
Noticeably, the extent to which these approaches are used varies from one country to another. Among the most prominent of these methods are the traditional and partnering approaches to procurement. The level of use of these methods in the UK and the UAE small-scale construction projects varies.
The 4G Wireless Networks succeeds in the 3G Wireless Networks as standards for mobile communication that defines how airwaves must be applied for transmitting both voice and data information. There are major differences in the ways in which the two standards of transmitting mobile communication function.
2 pages (500 words)
, Download 2
, Book Report/Review
Free
The author states that the most significant aspect to note is that the strain-hardening exponent may be obtained over the total plastic stress-strain curve of the true stress-strain curve stated in a metal specification. The strength and hardness of a metal limit the simplicity with which it can be tested and machined.
Traditional motion devices relied on manual control where speed and direction were manipulated directly using mechanisms attached to the moving parts. However, not all machines can be controlled manually in this way due to either extreme conditions in which they operate or the amount of time and strength needed during operation.
10 pages (3171 words)
, Download 1
, Research Paper
Free
They are also significant ways to enhance diversity and promote social inclusion within urban areas. The problem within the current era is the fact that there are fewer affordable homes available, or being constructed, within these urban areas. The past several decades have noted a significant shift in terms of how affordable housing is provided within urban areas.
Its scope is only limited to the very basic challenges that every country can face. It does not include specific issues such as the technologies needed in nuclear power reactors. Nuclear power is a low carbon technology. A comparison with other non-fossil technologies of generating electricity indicates that it is one of the lowest emitters of greenhouse gases.
These topics derive their importance from the fact that they provided us with a context to execute the project. After the class, each selected group member proceeded for conducting research on the weekend regarding the following week’s activity. This was the first week of my experiment or final activity this semester in the Introduction Engineering Design with Mr. Valli.
This twelve-week experience makes me conclude that engineering design aims at solving problems. The existence of a problem or issue marks the beginning of coming up with a solution design. Then, research will be conducted with that respect to determine the best possible solution.
Whilst the 1974 Health and Safety at Work legislation has been a well-respected framework for health and safety at organizations for nearly four decades, the frequency of incidents occurring at Silverfield mandate an investigation into why non-compliance to this Act and other legislations appears to be ongoing at the firm.
However, quantitative analysis and understanding of the housing sector in Hong Kong would be required so as to define the viability of the choice made for a chiller over another. Such kind of data shall be obtained from past recordings that have been made on the wet-bulb globe temperature, which was the main instrument in this study.
12 pages (3816 words)
, Download 0
, Research Paper
Free
To prevent water inflow, the grout curtains are normally placed around construction sites or shafts. Grouting is a widely used and popular method of controlling leakage of water in the fill dam constructions. The design of the grouting curtain will depend on the geological and geotechnical facets of the rock to be grouted.
Aluminum alloys falling under the 2xxx, 6xxx, and 7xxx series that can undergo welding have been developed to serve these requirements. The aerospace industries employ one type of these aluminum alloy in the wing skin and other plate applications. 6xxx series aluminum alloys have an application in thin sheet material in the fuselage.
9 pages (2387 words)
, Download 0
, Research Paper
Free
Pedestrian and vehicular access is from Fountain Bridge and from the recently formed access road to Edinburgh Quay, which is on the east side of the site. The site was previously part of the old Fountain Brewery. The information on the site is provided to us to help us carry the coursework effectively.
However, it is perfectly large enough to meet the requirements of all the necessary architectural activities that have to be initiated. The development planning and assessment would open grounds for full development after holding a discussion with the respective county council.
4 pages (1000 words)
, Download 0
, Research Paper
Free
This implies that there will be a need for a computer laboratory to carry out this research. The form in which the simulation software is available, for example in a networked system or standalone PC will be essential in determining this configuration set up. Apart from the named equipment in school, no other resources are required outside school
50 pages (8512 words)
, Download 1
, Research Proposal
Surfactant-polymer (SP) flooding is a tertiary recovery technique and quite common nowadays in Enhanced oil recovery .implementing the SP flooding is sophisticated and requires a good knowledge of reservoir feature.
The author states that if the other two responses are similar to that of Jones, then Jordan should proceed and confront Cash with his findings of falsified data. If Cash accepts, Jordan should try and collect the required data from the area Cash was assigned and try to compare them with the Cash’s computed data.
During the analysis, the determination of the relative density of the soil samples was critically important in evaluating the engineering behaviour of the soil samples particularly with regard to the compactness of a particular soil mass. The angle of repose is the greatest angle of decline compared to the plane to which a material can be piled without collapsing.
The main aims of tilt-up panels entailed construction indicates a proven technique for erecting office buildings, distribution centres, retail centres, warehouses call centres, commercial structures manufacturing facilities and industrial structures with increased rate, enhanced safety and subsequent awesome construction-oriented cost benefits.
This paper analyzes the works and life of Alexander Bell. The date of Birth of Mr. Bell is 1847, and he died in the year 1922. He is better known for the invention of the telephone, and he had more than 18 patents (Beihn, 2013). The grandfather, father, and brother of Bell had been involved in work on speech and elocution.
Disaster recovery is often made up of control measures and strategies. The control measures represent the mechanisms and steps that can eliminate or reduce some threats facing organizations. The different types of measures included in a recovery plan include detective, preventive and corrective measures.
Before analyzing the lift mechanism being used in the building, we will first focus on the type of power sources and motors available for lifting operation in such critical places. The building in which we are needed to implement the lift service is based on three stories but the lift design is double-deck type.
Due to the general condition of the Bhopal UC plant and its processes, if the slipped disk had not been excluded from the pipe washing procedure in December 1984, another factor would have caused a mishap. In reality, the same leakage had taken place the year prior but did not bring about the same disastrous outcomes.
Surveying, and for that matter terrestrial surveying the technique and science by which professional surveyors determine the terrestrial position of points in a much accurate manner (Johnson, 2008). The determination of terrestrial points takes place by looking into the distances and angles that are between the points.
5 pages (1544 words)
, Download 1
, Research Proposal
Free
Work is at current is being undertaken on the incorporation of the underlying new interface in order to enable the user to grant an order for guiding mainly based on the eye movement. The prevailing parts of the system that have already been developed are tested with the underlying fairly satisfactory outcomes.
6 pages (1663 words)
, Download 1
, Research Paper
Free
The research is aimed at showing the importance of sustainability in the construction world. By the end of the research, we expect to have discussed the impact of sustainable construction in Civil Engineering. The research will look at the various projects that have endorsed sustainability.
The data was broken down, and the expense of area buy and materials was computed. A three-stage strategy streamlined the configuration process. Stage 1 included reviewing the area and creating a suitable MATLAB code to model the establishments to rapidly and financially test a large number of locales for suitability.
6 pages (1739 words)
, Download 1
, Research Proposal
Free
The changes that are occurring in the world today can be attributed to the development that is taking place in the microcontrollers’ area. Microcontrollers have added and topped up the numerous improvements happening in engineering instrumentation and computer applications.
It has application in a different sphere that includes mining, military, and petroleum among others that are associated earth materials. A geotechnical engineering project is required to be conducted on the basis of certain procedures with the aim of having an appropriate understanding about material properties.
Most earth dams fail resulting from embankment and foundation piping, overtopping, differential settlement and cracks, embankment and foundation slides, slides during construction, earthquake damage, reservoir wave construction, damage from burrowing animals, damage from the water soluble material, flow slides from liquefaction and damage from surface drying.
The decimal number system is the most commonly used system by humans and it consists of ten digits from zero to nine which are referred to as the symbols of the decimal system. The decimal number system presents digits in a base-ten number meaning that each digit represents a value or units ten times the number to its right.
The distributive law states that ORing or adding two or more variables and then multiplying or ANDing the sum with a single variable is equivalent to multiplying or ANDing the single variable with each of the two or more variables and then adding or ORing the products (see Figure 12; note that ¯(=) denotes equivalence).
Arauco is a fully integrated company whose growth was brought by acquisition and mergers of related companies that eventually grew its base to be known as one of the top pulp and wood manufacturers in Brazil. It has four mills in 3 regions of Chile, with a total production capacity of 1,223,000 metric tons.
Many options available sources of funding for urban transport systems, ranging from public to private sources. Therefore, the planning phase needs to incorporate the funding aspect when dealing with such projects, which require huge amounts of funds and really play a significant role in informing the model to be implemented.
7 pages (1750 words)
, Download 2
, Book Report/Review
Free
The report provides an example of typical industrial application of the identified techniques in the measurement of stress in different test specimen. This is because these methods do not tamper with the physical properties or natural states of the samples under investigation for strain and stress.
Petroleum is extracted from Crude oil through a process of Refining which has two major branches of separation processes and conversion processes (Shell, 2014). Oil refining allows for the conversion and purification of crude oil by manipulating and changing the shape of its hydro-carbon bonds to provide new and useful products.
ECL uses much power. Each gate draws current continuously. Close to RTL is Transistor-transistor Logic, TTL. Its transistor conducts both functions of amplification and logic gating. However, it is power intensive especially at a slow speed (Jablonski, 67). TTL is an important foundation for many electronic devices.
The mathematical model provided through the research above indicates clearly that driving parameters and their outcomes for fuel consumption can be reliably tabulated. Driving tests in laboratory ensure the reliability of the mathematical model derived, which is then applied in real life driving tests.
The sets in a generator are designed to produce either single-phase power or three-phase power. This aspect is very critical in making a choice for the pancake generator to use since the power type to be used should be defined in the panel. Single-phase power is mostly used by residences and small business enterprises.
The study was performed with the overall aim of understanding why capital allowance remains an untapped potential among businesses and investors in the property development sector. To achieve this aim, very specific objectives were set to act as tasks that must be achieved in the course of data collection.
In general, sustainability in some cases seem to be taking over and most architects, as well as engineers, may be tempted to overlook durability in pursuit of building a sustainable building. This is risky because durability is an important factor when building and should never be replaced by anything else.
The major difference between the inner layer process of the PCB and the outer layer process of the PHT is that provides conductive connections between layers and mechanical support and also there is activation, DE smear, the hole conditioning, micro etch while in PCB there is cutting, beveling, pre-treatment, roller coating, exposure DES Line.
Although contractual partnering is effective, especially for the client, it is not advisable to apply universal contract terms or strategies in their entirety to partnering arrangements. However, there are certain contract terms that must be included in partnering arrangements. These non-excludable terms vary from one country to another.
The high population density makes the state a potential target for criminal activities such as terrorism and robbery. Considering the critical role played by tourists in the economy of Philadelphia, there has been a need to guarantee them maximum security because security threats are likely to scare away tourists and have negative effects on the state’s economy.
In the second level, all stories of the tower need to be built. For that, in the first story platform that height 190 feet and 58 meters, and the sides 232 feet and 71 meters long. It was also completed in 1888. The second story platform was about 379 feet, and 116 meters high from the bottom and the sides were 134 feet that are 41 meters long.
The Shard in London also known as the Shard London Bridge and Shard of Glass is the tallest building in Western Europe measuring 310 meters. Piano and Piano (2012) noted that the Shard in London is one of the newest landmarks in the European Union with 87 floors that constitute part of the London Bridge Quarter development.
The majority of territories have acknowledged the economic and environmental advantages as great drivers for the development of a smart grids in their province. Ontario declared its Smart Grid Fund of $25M to about 13 projects. ENMAX Energy has introduced a Micro Renewable Energy program for consumers across Alberta.