Engineering and Construction Essays

In this scenario, artificial intelligence that is a significant field of computing is being used to develop intelligent buildings. Basically, the objective of developing intelligent building is to offer a creative and less expensive

The paper describes how precipitation hardening is carried out in the practice of metallic materials can be strengthened. Precipitation hardening is a technique used for strengthening metal alloys. The hardness and strength associated with certain metal alloys could be enhanced by forming an additional phase of adversely small and evenly dispersed particles to the initial phase matrix.

According to the author, GCU (Glasgow Caledonian University) conducted a review of several qualitative studies and appraisals to determine the effectiveness of measures undertaken to lower construction accidents in the UK. The UK makes up for 5% of workers in the construction industry but 27% of critical onsite injuries and 9% of reported key accidents.

The production programming is regarded to be the main problem in Eco Tiles because obtaining a reactive production planning and scheduling system is inevitable in manufacturing.  This work presents a multi-agent system modeling for production planning and scheduling problems in Eco Tiles where constituent agents cooperate to find a possible schedule considering factory layout, capacity, time constraints, and on-line orders. 

A voltage regulator can therefore be defined as a gadget which creates an output voltage which is steady, clean and of known value under varying conditions including load impedances/load currents, varying

Gold’s splendid characteristics of ductility, malleability, resistance to corrosion, reflectivity, and good conductibility make it to be among the number one minerals that are used in the world. Despite these good characteristics of gold, the shortcoming in its production facilitates alternative elements such as nickel, silver, and steel to be used.

The decorative elements used in old buildings are missing in many modern buildings. For instance, in the case of Buckingham Palace, it is quite possible that the architect would have forgone the use of vivid scagliola. If Buckingham Palace had been created today, it would have been obvious that the building would have been housed with the latest technology.

Communication science has always been my area of interest. I think this is a right time for me to go further in this field as I have not only completed my undergraduate studies but also I am fully determined to establish

In fact, it was healthy, and the only British fighter aircraft in continuous production before, during and after the war and produced in large quantities than any other plane. After the war, the Spitfire served

Among the known variables include the dimensions of the form block, rate of strain, displacement measures, and theoretical elastic modulus. On the other hand, the unknown quantities as applied in the experiment included strain rate, the effect of the elastic

When the filter was tested, the layer order was ………………….. The turbidity value before the test was found to be ……………………. Whereas the value after the test was found to be ……………………… Something I learned

A trial pit is an excavation in the ground which helps and allows us to investigate or sample the structure and composition of the subsurface, this is usually dug during a site investigation, analysis, or a soil survey. Usually, the trial pits are burrowed before the construction so as to ascertain the water table and geology of that site.

The Arctic region has little or no amount of sunlight throughout the year and, therefore, the area does not benefit from the conversion of solar energy into electricity. The areas that are better placed are found in the tropics. Most

It is important to define the evolution of flight deck systems and explain why such development is essential. Basically, the consistency and logic of its development prevails the efficiency and safety of operations considering its complexities. Flight desk management is risky and needs proper maintenance because it serves as the life source of an aircraft.

Civil engineering is deeply involved with community service, development and improvement planning, design, construction, operation and maintenance of the facilities that are indispensable for contemporary life.

One of the objectives of the experiment is to investigate how mass transfer coefficient associated with humidification of air varies with the rate of air flow (air flowrate). Another objective of the experiment is to determine the relationship

My move from Germany to the UK has been the most challenging encounter for me along with my parent’s separation. During this hardship I had to overcome many obstacles such as the language barrier, accepting a completely new lifestyle having to move from a remote village

A Stereomicroscope plays a key role in quality assurance review of the prototype Acrylic display unit. A Stereo microscope examines checks the surface finishes of the display unit

Due to reduced congestion and traffic jams, the new road design will reduce road accidents that have led to massive loss of life and destruction of roads and vehicles. The road will have conspicuous road signs with sufficient lighting to enable users to read day and night. This will further reduce accidents that emanate from unclear road signs.

Improving manufacturing technologies involves collection and analysis of data and making sound decisions. The following are some of manufacturing technologies used. The Lean approaches are

The communities and industries along the coastal zone heavily rely on this zone. Engineers are working very hard to make sure these communities and the industries

Notably, this occurrence usually forms less than narrow sand spits (Goudas 49). It is worth noting that structures that were constructed

The matlab is shown below The open loop transfer function will be From the system therefore m has zero finite zeros. Hence there exists 0s as s moves to infinity;. The function will be rewritten as where is the numerator

Nonetheless, various adverse effects that result from the same include displacement of people to pave a way for the construction. In a transport construction project, there are several stakeholders such as the government, the

 The ionization smoke detectors cost less although they both accomplish a similar objective. Nevertheless, this is incomparable to the effectiveness of the devices. Unlike the ionization smoke detector alarms, the photoelectric smoke detector alarm is effective and more reactive to smoke emanating from fiery fires in the kitchen. 

The paper links engineering design to the problems that occur in society such as problems in the environment, economy, and legal realms. Design refers to a structured activity meant to solve a problem. Combining both, the design process means a systematic and well-organized approach that leads to the desired result.

The California Bearing test value has been determined. This was the Amin objective of the experiments and it was done successfully. From the flow of the experiment, it can be concluded that the California bearing ratio is the most cost-effective, time-saving method that can be used in the design of pavements as compared red to other methods.

The response of people to the relevant initiatives may be difficult to be identified; under certain circumstances, people may be willing to support the efforts of authorities or of the private sector in regard to pedestrian safety but the pressures for responding to daily living needs may be a critical obstacle to such response.

The author states that the potential of Nanotechnology in the technological field for both cosmetic and medical purposes is great. Nanotech medication can be devised that have strong antimicrobial properties to treat this infectious skin disease. The use of encapsulated benzoyl oxide is used for the purposes of improving the activity.

Concrete's characteristic strength, workability, high compressive strength, and uniformity of the finished surface have endeared it to many construction activities in the modern world. The author of the paper argues in a well-organized manner that all over the world, tons upon tons of concrete are being poured to make concrete structures every day.

Many Finite Element Analysis (FEA) applications are available to provide the engineering community with helpful drafting and simulation software tools. Among the most popular are (FEA, 2009-2011): The applications assist with

This paper evaluates the research report, identifies the most positive and the least positive aspects of the research experience, and outlines targets for improving my performance in conducting further research. My experience in the research process

In every instance of orbit, the satellite swath covers a specific area of the earth. The satellite orbit’s elevation is designed in a manner that allows the swath to retrace a similar path and location repetitively over an interlude of

The author states that in various engineering applications it is often the case that a given homogenous core material is reinforced using another material that is stiffer and also stronger to achieve required mechanical and material property. Usually the constituent material used for the reinforcement is fibrous.

Solar power systems are absolute and have specific power site loads, which are reliable and do not need an extra expense for putting up utility power2. The emerging trend of conventional heat pumps coupled with the solar power technology paved

The management has the responsibility of ensuring workplace safety. Workplace safety ensures safe working condition for employees in an organization. In fact, the examples for workplace

The word “design” can also be used as an adjective to compare different works by designers. The purpose of this study is to understand design education and technology, mostly in the recent future, given that with the growth in

Several areas of study have been used to establish the principles associated with the manufacturing process. For instance understanding the concepts of lean manufacturing, “just in time” manufacturing, total quality management and

After several years of trial and error, eventually, man learned to fly. The first time when the man flew using a balloon, it was a remarkable milestone in the history of aircraft (Claxton, 2007: 9-10). However, the story does not stop there. In the later years, the focus gradually shifted from invention to innovation.

Despite this, I would not forget my integrity and moral values, whereby I will immediately embark on finding an effective solution, which will be appropriate, both for me and the owner of the car (Jennings, 31). Since the car is parked in the parking area of an institution, it is obvious that the owner is on campus. I will immediately note the registration number.

Earthmoving equipment advancement has made work easier for construction companies while at the same time increasing efficiency and reducing costs. It is worth noting that the construction industry has benefited massively so too have the facility designers, construction researchers, and construction educators.

ive and origin of canning as a technology and the preceding improvements both in the manufacture of cans as a packaging container and the thermal process. As stated in this paper, Appert’s work made a turning point to food preservation and the inventions thereafter evolved the

The UAE is currently going through rapid expansion, with the Emirati governments fuelling the growth by investing the proceeds of international

An embedded network system is a system that consists of a number of embedded units that are able to communicate with each other. Embedded systems have become more connected and they have become very crucial communication channels in digital systems. This results in a large scaled complicated network system.

An Engineer has to play a vital role in creating or building the new technology which is useful to make human life more comfortable. He fulfills various modern needs of the people. So the major role of the Engineer is to respond to certain requirements of the people and thus create something in prescribed guidelines.

In most cases, construction sites may be located in distant locations from the head office depending on the nature of the project being undertaken. Mostly, skilled people like Engineers may not always be on site but would periodically visit it to assess progress made as well as check on safety procedures.

The likelihood of existence of dangerous materials or petroleum products on a site under circumstances that indicate a present release, past release or a possibility of a

Consistency to the goals of the organization - the main objective of the organization is to give the students the best of quality they can manage. The new bathrooms are deemed to be of improved quality thus it would confirm much well with the objectives of the organization. This will ensure the comfort of the students’ accommodation is factored in.

Impedance is seen to increase in a linearly when we generate a graph of impedance versus frequency. The impedance at very low voltage access points

Therefore, a certain degree oxidation is unavoidable under normal SLM conditions and powder handling [1]. More so, during laser processing, there is a likelihood of occurrence of the balling phenomena. This is as a result of the presence of