Free

Mortar - Lab Report Example

Comments (0) Cite this document
Summary
The result of the experimental study has put forward the bond prism strength to be 6989. b) However the shear prism strength was 1.5 Mpa c) The masonry mortar cylinder average strength was 93.7 % of 4.07 cm…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER91.4% of users find it useful
Mortar
Read TextPreview

Extract of sample "Mortar"

Results a) The result of the experimental study has put forward the bond prism strength to be 6989. b) However the shear prism strength was 5 Mpa
c) The masonry mortar cylinder average strength was 93.7 % of 4.07 cm.
d) The strength of mortar would be 70 (0,5)Mpa.
e) The type of masonry mortar used is type S which is cement based. The lime to cement ratio was 1 : 4
f) The failure mode for the test prism specimen was tension failure.
g) The failure mode for the shear test specimen was bar slipping failure.
Discussion
a) i) The workability of the mortar was not in control and when the mortar was dropped on the flow table it sits and hence flow decreased. It was necessary to add water to the mortar to make it workable. The mortar did not have a smooth plastic quality.
ii) The strength of the mortar was weak and it has a consistency which was slightly running.
b) There does not exist a water/cement ratio guideline for mortar because an optimal balance for the mixture of water and cement was not achieved even after many trails .
c) i) There was some anomalous result like the presence of chemical in the mortar from lime and sand which decreased the mortar strength regarding lime to cement ratio.
ii) The differences in the strength of the mortar got reflected in the bond test as it was difficult for the mortar to bond with the brick. Also it got reflected in the shear test as the mortar was slipping away while applied between the bricks. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Mortar Lab Report Example | Topics and Well Written Essays - 250 words”, n.d.)
Mortar Lab Report Example | Topics and Well Written Essays - 250 words. Retrieved from https://studentshare.org/engineering-and-construction/1701727-mortar
(Mortar Lab Report Example | Topics and Well Written Essays - 250 Words)
Mortar Lab Report Example | Topics and Well Written Essays - 250 Words. https://studentshare.org/engineering-and-construction/1701727-mortar.
“Mortar Lab Report Example | Topics and Well Written Essays - 250 Words”, n.d. https://studentshare.org/engineering-and-construction/1701727-mortar.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Mortar

Earning degrees on-line vs. through traditional brick-and-mortar education

...Argue the advantages and disadvantages of earning degrees on-line vs. through traditional brick-and-mortar education. All over the world, for centuries, traditional education has taken place in brick and mortar institutions. Most of the most reputable institutions in the world today are traditional brick and mortar educational institutions; take, for example, the top five universities in the world: University of Cambridge, the United Kingdom; Harvard University, the United States; MIT, the United States; Yale University, the United States; University of Oxford, the United Kingdom (Worlds Best Universities 2012). These are places that require the physical presence of their students...
20 Pages(5000 words)Admission/Application Essay

Distance Learning and Brick-and-Mortar Learning

...[Student’s Name] [Instructor’s Name] [Course name and code] 09 November 2011. Compare and contrast essay: This paper is primarily based on attempting to compare and contrast between distance learning and brick-and-mortar learning. While on one hand this remains a credible reality that brick-and-mortar learning provides the students with the amazing academic opportunity of real-time interaction with the professors, this fact cannot be denied as well that online courses available for learning provide the students with more spare time which could be used by them for extracurricular activities, especially if they happen to have families of their own or other part-time jobs. The discussion contained in this essay basically focuses... on...
5 Pages(1250 words)Coursework

Tacit Knowledge - The Mortar of the Design Process

...?Importance of Tacit Knowledge to the Military Design Planning Process Introduction Tacit knowledge refers to knowledge which is informal and is not codified; it is the type of knowledge which is difficult to transmit to another person through writing or even verbalization. Such tacit knowledge serves various purposes and is relevant based on its applications. This paper shall discuss the importance of tacit knowledge to the military design planning process. It shall cover the impact of tacit knowledge on military leadership, to civil-military relationships, to the positive impact on operational variables, on the benefits to diversity within the military, and on ensuring ethical conduct. Body Tacit knowledge is the kind... of Tacit Knowledge...
15 Pages(3750 words)Research Paper

Assess of the strategies and processes as compared to traditional bricks and mortar businesses

..., the company should choose the kind of payment system based on factors such as the nature and distribution of the consumers and the kind of technology needed. These kind of security issues and technical problems need not be encountered in a "brick and mortar" business. The payment options and security options are limited and the risks of fraud are very less. In case of a eBusiness company, the reliance on the technology for its operations especially with respect to receiving payments and managing its supply chain is high. This is a crucial distinguishing factor that has to be kept in mind when we design a ebusiness model. Technology is the key for success, whatever may be the operations, whether it is procurement,...
10 Pages(2500 words)Essay

Materials: Development of pre-dried and blended lime mortars for the ready-mix market

...Materials: Development of Pre-Dried and Blended Lime Mortars For the Ready-Mix Market INTRODUCTION: For increasing sustainability in business operations, there are four key areas that the building industry needs to improve, which are: energy, materials, waste and pollution. Hence, a prudent use of natural resources is essential (CIOB, 2007: 3). This paper proposes to present a literature review on the development of pre-dried and blended lime mortars for the ready-mix market. There is an increasing market for the newly introduced ready mix lime mortar. Through research and development this further promises to evolve into the next generation of mortars, which will...
10 Pages(2500 words)Essay

The Tools and Techniques of Change Management

...in a brick-and-mortar and a virtual organization. The management of change in a brick-and-mortar and a virtual organization has some similarities but a lot of differences. A neutral person does not resist a change without a reason. The ability to except a change is important for both individuals and organizations. For both brick-and-mortar and virtual organizations a human resources manager, who is in the unique position of ensuring the agility of the organization’s human capital, faces a lot of important issues which must be given consideration in order to achieve the strategic goals of the company. The important issues needed to be addressed are planned and unplanned change, global and...
5 Pages(1250 words)Assignment

Brick and Mortar vs Based Businessess

...Traditional business vs online business: Traditional business is often conceived as the typical brick and mortar business i.e. “a business which requires an actual building to conduct operations from” (Franchise Wisdom, n.d.). A traditional businessman first has to layout the site, then develop it as per the demands of the business. Only after that, a business can be started. Considerable portion of a businessman’s total investment is used up in the initial make up of business in terms of office development and setup. Brick and mortar is also very suitable term for traditional business because it symbolizes material, labor and physical involvement in the business, be it related to construction or not. On...
2 Pages(500 words)Term Paper

LIBRARY RESEARCH PROCESS

...Describe the “best practices” you follow when conducting research in a bricks-and-mortar library Brick-and-mortar library is a central place in a campus where a student can go for books, magazines, newspapers, journals and any other published materials (Zemliansky, 2008). For effective access of materials, various considerations have to be put in place as best practices. This practices range from the reference desk to the shelves where one gets the materials. Starting from the reference desk helps one to avoid wasting time while wandering around the library since the reference librarians directs one to where the materials could be found on the shelves. A researcher should always start from the reference...
2 Pages(500 words)Research Paper

E-Business

...What can you do to take your E-business to the next level? The best next level that an E-busines should take is to have a physical brick and mortar stores in key regions of the country where the majority of customers reside based on sales. The brick and mortar store or office will reinforce the online presence in many ways and will expand its customer reach by serving segment in the market that it has not previously served. There are many advantages in complementing the online presence with brick and mortar presence. First, it will help decide those are still mulling about the company’s product or services. Second, the brick and mortar presence will serve as a show...
1 Pages(250 words)Essay

Portland Cement Mortar Cubes

...Portland cement Mortar Cubes Introduction The objective of this experiment is to apply the ASTM C 109 and C 150 in testing the compressive strength of Portland type 1cement at the first, third and the seventh days. ASTM C 109 defines the procedure for testing compressive strength of hydraulic mortar using 50 by 50 millimeter cube specimens. ASTM C 150 gives the standard specifications for Portland Cement. Equipment and materials The apparatus used included Fine aggregate, Portland type 1cement, Molds for mortar cubes, scale, measures, testing machine, tamper, trowel, moist cabinet, mixer, bowl and paddle. The material used was graded standard sand. Procedure Before this lab, samples of...
3 Pages(750 words)Lab Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Lab Report on topic Mortar for FREE!

Contact Us