Nobody downloaded yet

Marking Machine / Fluid Power - Lab Report Example

Comments (0) Cite this document
Summary
When the push button is pressed on switch 1, two signals re sent out to pressure valve 1 and then pass the signal on to port 14. Being a one way control, valve 3 will reverse and result into the advancing of the…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER93.5% of users find it useful
Marking Machine / Fluid Power Lab

Extract of sample
"Marking Machine / Fluid Power"

Download file to see previous pages From the analysis of the circuit diagram and the displacement diagram, it is clear that the time delay valves are very necessary for the delay of the output signal. The transmission of energy within the system can easily be controlled using the valves. The main advantage of this set up is that the pressure that is experienced during its operation can be controlled without wasting the energy hence increasing the efficiency of the ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Marking Machine / Fluid Power Lab Report Example | Topics and Well Written Essays - 250 words - 1”, n.d.)
Retrieved from https://studentshare.org/engineering-and-construction/1684695-marking-machine-fluid-power-lab
(Marking Machine / Fluid Power Lab Report Example | Topics and Well Written Essays - 250 Words - 1)
https://studentshare.org/engineering-and-construction/1684695-marking-machine-fluid-power-lab.
“Marking Machine / Fluid Power Lab Report Example | Topics and Well Written Essays - 250 Words - 1”, n.d. https://studentshare.org/engineering-and-construction/1684695-marking-machine-fluid-power-lab.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document
CHECK THESE SAMPLES - THEY ALSO FIT YOUR TOPIC
Marking
...of profit making organizations where a market is segmented according to specific needs, geographic location and purchasing power of customers, Syco Entertainment has used this strategy to segment UK and London to facilitate easy and effective provision of services to them. Segmentation This is a marketing strategy that is aimed at Segmenting, targeting and positioning the market to suit a particular product that is being offered by the organization. Segmenting: by segmenting the market according to certain specific needs like either movies, film or television services, Syco Entertainment has been able to offer appropriate solutions to customers in the film industry. This is because the approach provides a cutting edge...
6 Pages(1500 words)Essay
Environmental fluid mechanicsopen channel flow lab report
...Calibration E E2 5.0 mm 26.8439 22.1684 10.0 mm 27.8982 23.3422 15.0mm 29.1291 24.7001 20.0 mm 30.3596 26.0466 25.0 mm 31.8851 27.2039 30.0 mm 32.7362 28.8377 35.0 mm 34.3816 30.3886 40.0 mm 36.1426 32.2676 45.0 mm 38.1007 34.3447 50.0mm 40.381 36.75 Calibration Upstream Downstream 5.0 mm 31.0409 31.0499 10.0 mm 31.9682 31.9744 15.0mm 33.0741 33.0691 20.0 mm 34.1736 34.1616 25.0 mm 35.1511 35.5511 30.0 mm 35.8722 36.2662 35.0 mm 37.4136 37.7576 40.0 mm 39.0166 39.3456 45.0 mm 40.8687 41.0357 50.0mm 42.991 42.993 5. Tabulated results of H1 and H2 for Supercritical and Subcritical Subcritical Calibration Upstream Downstream 5.0 mm 61.1766 61.2161 10.0 mm 60.5897 60.3961 15.0mm 59.93 59.6715 20.0 mm 58.773... E E2 5.0 mm ...
5 Pages(1250 words)Lab Report
MET329 Fluid Power
... MET329 Fluid Power Fluid power is an English term used to describe the pneumatics and hydraulics technologies. It is the technology where fluids, either gas or liquid, used for transmitting power to a different location. Fluid power is a field of engineering and applied science that deals with mechanical analogies of liquids and gas. Hydraulics in fluid power are used for generating, transmitting, and controlling power through liquid pressurization. However, this research study focuses on establishing the origin and the current application of MET329 Fluid Power course. The MET329 Fluid Power is a career course offered by accredited worldwide universities such as Indiana State University. The course was inspired by the long time... ...
1 Pages(250 words)Research Paper
Fluid lab ( Head loss through a pipe)
...Head loss through pipes There are two es of fluid flow, these are internal fluid flow and external fluid flow. This ification is depend on whether the flow id in a conduit or over a surface. Each of this classes of flow has different flow exhibition characteristics. Internal fluid flow occurs in a conduit the flow mainly occurs due to pressure difference in the pipe. Flow through a closed pipe is described by the flow rate which is influenced the velocity and the fluid the surface area of the pipe. The velocity of flow varies at different points of the pipe whereby its zero at the surface of the pipe, and this is attributed to the no- slip conditions,...
2 Pages(500 words)Lab Report
Fluid lab ( Head loss through a pipe)
...Head loss through pipes Department Head loss through pipes There are two es of fluid flow, these are internal fluid flow and external fluid flow. This classification is depend on whether the flow id in a conduit or over a surface. Each of this classes of flow has different flow exhibition characteristics. Internal fluid flow occurs in a conduit the flow mainly occurs due to pressure difference in the pipe (Spellman, 2000). Flow through a closed pipe is described by the flow rate which is influenced the velocity and the fluid the surface area of the pipe. The velocity of flow varies at different points of the pipe whereby its zero at the surface of the...
2 Pages(500 words)Lab Report
Sorting device for metal stampings experiment / FLUID POWER LAB
...Result and Discussion This section analyzes the result of the experiment done with regard to sorting device and metal stamping. The experiment was conducted with less difficulty and less error has occurred during the lab practice. The different devices were connected together primarily to start the experiment. The devices like single displacement cylinder, pressure gauge, control valve, push button valve were the main ones included to proceed with the experiment. When the setting up and connection was done, the green button on push button valve was pressed. It was noticed that on rotation of the one – way control valve, the top pressure gauge worked faster. It should be understood that the metal stamping device was...
1 Pages(250 words)Lab Report
Fluid power
...Fluid Power Fluid Power Describe briefly the operating principles of a variable displacement axial piston pump. Discuss how the delivery is varied. Also show by sketch. Answer. A variable displacement axial piston pump consists of casing, drive shaft, cylinder block, swash plate and plunger or swash plate adjusting valve as shown figure 1a. The operation of pump is based on the conversion of mechanical energy to hydraulic (fluid) energy through the displacement, or amount of fluid pumped per revolution of the pump’s input shaft. At certain inclination (angle) of swash plate as the pump’s shaft rotates a partial vacuum (suction) is created...
1 Pages(250 words)Coursework
Switching point for work place - Fluid Power Lab
... Results When testing for switching points for different work pieces, the following results were obtained. On the components OZ1, OZ2, 1V1 and 1A, mild steel, stainless steel, aluminum and copper work pieces have switching points and the hysteresis effect is low. Brass has very few points while plastic, cardboard and rubber have no switching points at all on these components. 1S1 and 1S2 show minimal hysteresis effect on brass, and aluminum which increases on mild steel, stainless steel and copper and multiple switching points are recorded. No switching points are recorded on plastic, cardboard and rubber. 1V2, 1V3,1V4 and 1V5 record multiple switching points when tested on mild steel, stainless steel, aluminum, brass and copper... Results...
1 Pages(250 words)Lab Report
Separating out plain pins - Fluid Power lab
...Insert Separating out Plain Pins Results The circuit designed utilized bi-stable memory with the ability to control the cylinder forward and backward action. The total number of pins fed into the system was successfully separated into two groups. The forward stroke drove one group while the backstroke set the second group of pins. Conclusion The experiment objectives were met whereby the plain pins were successfully separated. The group of pins was separated into two varying groups based on the pin size. The first groups were selected from the first forward stroke while the second group was selected from the backstroke of the double acting cylinder. The circuit design for the control mechanism was the most challenging part... Separating out...
1 Pages(250 words)Lab Report
Power electornic lab 4
...AIM: The purpose if the lab is to evaluate the functional parameters of the DC/AC Inverter and (UPS). In the lab, we will clearly seek knowledge about the conversion of voltage, principle and applications of the DC/AC Inverter and UPS. At the end of the experiment, we will demonstrate the results taken from the experiment. Results and calculations are based on the output voltage, ripples, output wave diagram of the DC/AC Inverter and (UPS) and compared it with theca source. Introduction: An inverter is a device that converts DC power to AC power. The conversion is used in a variety of applications as the backup power including personal computers at homes...
3 Pages(750 words)Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Let us find you another Lab Report on topic Marking Machine / Fluid Power Lab for FREE!
Contact Us