Nobody downloaded yet

Three-Unit Electromagnetic Generator Control - Essay Example

Comments (0) Cite this document
A DC generator produces current that flows in a constant direction as opposed to the alternating current which periodically reverses direction. Most…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER93.4% of users find it useful
Three-Unit Electromagnetic Generator Control
Read TextPreview

Extract of sample
"Three-Unit Electromagnetic Generator Control"

Download file to see previous pages On the other hand, a current cutout system disconnects the battery from the generator this system is used to power the generator when the motor cannot produce enough power this action is called motoring.
Understanding how the rheostat interferes with the strength of the electric field to limit the amount of current produced by DC generator is at times problematic. This is because to explain the same one requires visualizing the circuit board and committing it to memory. However, the logic behind this operation is self-explanatory especially if the relations between current, voltage and resistance are well ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(“Three-Unit Electromagnetic Generator Control Essay”, n.d.)
Three-Unit Electromagnetic Generator Control Essay. Retrieved from
(Three-Unit Electromagnetic Generator Control Essay)
Three-Unit Electromagnetic Generator Control Essay.
“Three-Unit Electromagnetic Generator Control Essay”, n.d.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document
Electromagnetic induction
...a small DC voltage, amplification of the volatge indicated a positve polarity and reduction a negative one. The experiment was thus succesful in testing the two laws above. Practical: Electromagnetic Induction In magentic induction, the induced elctromotive force or emf in a closed circuit would be equivalent to the time rate of the magetive flux passing through the circuit. Electromitive force, emf is the engery gained per unit charge that passes through an elctric conductor such as a generator. Emf in any circuit is measured in Volts, and a source to give the emf is applied to power up the cicuit (Breithaupt, 2000). On the other hand, in magentic induction,...
9 Pages(2250 words)Assignment
Electromagnetic induction
...operation for transformers, generators, electric motors, induction motors, solenoids, and synchronous motors. Electromagnetic induction is the process, which gives a prediction of the behaviour of the interaction between electric current and the magnetic field. Michael Faraday discovered the concept of induction in the year 1831. He stated that the produced electromotive force (emf) around a path that is closed is directly proportional to the magnetic flux rate of change through a surface that is path bounded. This implies that, there would be some induced electric current in a closed circuit whenever the flux going through a conductor bounded surface changes. This means that the conductor will be moving...
4 Pages(1000 words)Essay
Electromagnetism Spectrum. Electromagnetic radiation
.... Electromagnetic radiations carries energy called radiant energy through space and continuously away from its source. They also carries both angular momentum and momentum, all of which are impacted matter upon which EMR interact with. Electromagnetic waves are often produced from other forms of energy when they are created, and they are converted to other forms of energy whenever they get destroyed. The photon is the basic unit and constituent of all form of electromagnetic radiation, and is the quantum of the EMR interaction. In classical physics, electromagnetic radiation is considered produced whenever forces act on charged particles to accelerate...
4 Pages(1000 words)Assignment
Unit Three Critical Discussion Blog
...EUPHEMISM My example is the term: “extraordinary rendition.” It is used in many sources. Here is one example. It is a term describing the extrajudicial kidnapping of foreign citizens (often by the United States) because they are believed to be involved in terrorism. Here is a link that uses the term and explains more” The term is an example of a euphemism. The language is intended to obscure or hide the true meaning of the activity in question. It sounds like an official or legal term when in fact it is not. The extraordinary part of the term even sounds quite nice. The word rendition means to carry or take something somewhere (with a slightly sinister echo...
1 Pages(250 words)Assignment
Electromagnetic Compatibility of Devices
...operating conditions. Some devices can be used as a transmitter and receptor, but not generally at the same time. Second to perform a visual inspection on all emitters and receptors for the terrible bond, corrosion, decorated with twisted cord of the Russian Federation difficulties, broken antenna, no attachments / covers, and any other non-standard conditions. Cohen, S. (2007)). Third Place on the receptors on one and install it in the most perceptive normal operation if the unit receiver tuned to a weak signal from a source that is not one of the test-emitters. According to Williams and Armstrong (2000), metal-coated devices, and plastic-coated cable were also affected by...
9 Pages(2250 words)Essay
Unit Three: Assignment #1: Crayola
...Unit Three: Assignment Crayola How would you define the attributes and benefits of Crayola products? The 20 productsbrands of Crayola are of high quality, non-toxic and safe products available at an affordable price. The branding of the products incorporates characters that appeal to the target audience. The brand seeks to provide for educators mainly the teachers. Students relate with the products as it brand has grown over time (Ferrell and Hartline 177).    Define the core actual and augmented product benefits. The core product benefit of the Crayola is the crayons, which is the basic benefit that the consumer wants. The actual products relates to reflecting on the core products that will...
1 Pages(250 words)Assignment
Generator Protection Measures
...the with fault line conductors touch each other as well as the ground. Conclusion As outlined and detailed above, it is necessary to carry out generator protection in order to take care of unforeseen problems. It is very necessary in order to eliminate some of the electrical as well as the mechanical faults which are the major causes of inefficiencies in machines. With such preventive mechanisms, it will lead to safety in places of work thus encouraging a conducive and save environment. References Kundur, P. (1994) Power System Stability and Control, McGraw-Hill, ISBN 0-07-035958-X Johansson E., et al.,(2002)Location of Eigenvalues Influenced by Different Models of...
5 Pages(1250 words)Thesis
Oscilloscope and Function Generator
...The oscilloscope and the Function Generator al affiliation: Introduction The purpose of this experiment, essentially, was to study and become familiar with function generators and oscilloscope. This was aimed at facilitating the appreciation of the important difference that exists between them. An oscilloscope can be as well be referred to as a voltmeter (high speed voltmeter) with the ability to display and measure the rapid variation in voltage or the potential difference. A function generator, on the other hand, produces a voltage signal that varies with time. Clearly, the functions of these two instruments are related, and in trying to understand the fundamental functioning of the two, the variables that were measured include... the...
1 Pages(250 words)Lab Report
... of Huddersfield School of Computing & Engineering Assignment Report – Electromagnetics Session 15 Deadline Word Limit (excluding title page, contents list, text within figures and tables, and appendices): 2500 Word Count: 2279 Table of Contents Introduction 3 2.1 Magnetic shielding 4 2.2 Falling magnets 6 2.3 Homopolar motor 7 3.1 Compass needles 8 3.2 Flux density decay law 10 3.3 Earth’s magnetic field 11 3.4 Coil current and coil resistance 12 3.5 Induction 14 3.6 Effect of frequency on induction 16 3.7 Phase change in a transformer 17 References 18 Introduction This paper is about exploring, observing, analyzing and understand the behavior of different materials in interaction with magnets as well as the phenomena associated... with...
9 Pages(2250 words)Research Paper
... of transformers ensures that reliable and secure operations of the power system grids are maintained. Phase shifting also helps to control the real power flow in the transmission lines all through and the systems intertie. Phase shifting of transformers gives room for better utilization of existing networks especially when dealing with the load growths. Apparatus, equipment, and materials Three square plates of material steel, aluminum and PVC (plastic). A pair of small, but powerful, neodymium magnets Threaded stud Copper pipe AA size battery Conducting wire PHET simulation software Procedures Procedure 1: magnetic shielding 1. Using the threaded stud, one neodymium magnet was suspended 2. Different materials were brought close... the...
10 Pages(2500 words)Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Let us find you another Essay on topic Three-Unit Electromagnetic Generator Control for FREE!
logo footer
Contact us:
Contact Us Now
FREE Mobile Apps:
  • StudentShare App Store
  • StudentShare Google play
  • About StudentShare
  • Testimonials
  • FAQ
  • Blog
  • Free Essays
  • New Essays
  • Essays
  • Miscellaneous
  • The Newest Essay Topics
  • Index samples by all dates
Join us:
Contact Us