CHECK THESE SAMPLES OF Three-dimensional (3D)
...?3D Printing: Manufacturing Revolution An exciting new emerging technology is the concept of 3-dimensional printing. This has the potential for not just changing manufacturing, but all aspects of daily life for the everyday consumer. While at least some of the hype may be a result of the hype cycle, at the very least, 3D printing will be a big deal for manufacturing. 3-dimensinal printing, as the name indicates, is the technique of creating 3-dimensional models of objects using materials such as rubbers, plastics, wood pulp, ‘wood flour’ and tough ABS polymers and metals. It does so by creating a 3D model of the desired object layer by layer. More...
4 Pages(1000 words)Assignment
...Two-dimensional Design Art Mona Lisa Mona Lisa is a two dimensional artwork done by Leonardo da Vinci between 1503 and 1507. The painting possesses a superb composition and contains several aspects of techniques necessary in the explanation of artistic work. The artist utilized the color and the object’s contrast and distinctions carefully to ensure coherence of the elements in the painting. In Mona Lisa there is an enhancement of the aspects of art as the rhythm, shape color and line to obtain proper enhancement of the work. The combination of these design elements forms the composition of the artwork (Kalogridis, p. 271). Color interaction and the relativity color The color determines the interaction...
3 Pages(750 words)Essay
.... For a long time, people have always seen negotiation as a social theory that requires only skills and tactics during the round table meeting. However, modern day negotiators are using the revolutionary process of negotiation referred to as the 3-dimensional negotiation. This paper seeks to explain the elements of three dimensional negotiations as explained by Lax and Sebenius (2006). According to lax and Sebenius (2006), negotiation is not effective if given the usual one dimension style. They argue that traditionally, negotiations entailed the use of tactics to either gain the advantage under the topic of conflict or have such benefit distributed among the concerned parties. The usual...
3 Pages(750 words)Essay
...is the essence 8
2. Three dimensional construction from single-view images 10
3. Automatic Reconstruction from 700 frames 13
4. Dense point matching in three steps 15
1. Introduction
A number of three dimension reconstructions from two or more images in a one-step and multi-step algorithm have been made. However, none of these algorithms succeed to process more than a few tens of images when the amount of missing elements reaches 90% of the measurement matrix and cameras have large field of view (Martinec & Pajdla 2005).
(Martinec & Pajdla 2005) proposes an algorithm has the following advantages: First, it provides an overall scene structure in...
20 Pages(5000 words)Essay
...3D XML Overview X3D Overview X3D is a scalable open software standard for creating and presenting interactive 3D content in real-time. Merging real-time 3D data, presentations and controls with non-3D content becomes fast and easy using X3D’s XML-encoding and Scene Authoring Interface (SAI) features, which are provided for both web and non-web applications. X3D visual effects and behavioural modelling have a great number of uses, including GIS, CAD, visual stimulation, medical visualization, entertainment, education and other such multimedia presentations. The software can also be used across hardware devices.
X3D builds on the success of the Virtual Reality Modelling...
12 Pages(3000 words)Essay
..., the use of three-dimensional echocardiography was at a point reduced to the research side of cardiology and not in the clinical setting. Only until very recently has 3D echocardiography been used by cardiologists, and echo cardiographers in hospitals and clinics. Another interesting thing is the fact that transthoracic three-dimension ultrasound has been trumped by three-dimensional trans esophageal echocardiography, especially in the operational room and surgical setting (Lange, Palka, Burstow and Godman 403).
The development of three-dimensional echocardiography (3D TTE) can be traced...
10 Pages(2500 words)Research Paper
...is a printer that prints in three dimensions" (5). Deriving from this definition of a 3D printer, 3D printing is therefore printing objects in three dimensions. This technology has transformed printing from the conventional two dimensional methods which lacked height to three dimensions that comprise of height (Kelly 5). To further differentiate between the conventional method of 2D and modern 3D printing, Kelly asserts that whereas ink is used in 2D printing, 3D printing mainly uses plastic in order to achieve a three-dimensional object (7).
Advantages of...
6 Pages(1500 words)Essay
...3D Printer 3D Printer Equipment The equipments in the lab include a Maker Bot Replicator 2, Z Corporation Spectrum 2510, FANUC Robot LR Meta 200ic, and LMU3D 1 printer. Maker Bot Replicator 2 offers a high-speed, easy, and reasonably priced tool for producing quality 3D models. It allows one to prototype easily, and is suitable for quality printing on a MakerBot Replicator 2. In contrast, FANUC Robot LR Meta 200ic is suitable for general purpose and material management. LMU students with the help of the professor created the LMU3D 1 printer and it is not yet finished. Finally, Z Corporation Spectrum 2510 is for 3D color product.
Requirements
There are several...
1 Pages(250 words)Lab Report
...ProJet 5500x Firmy 3D Systems Printer ProJet 5500x Firmy 3D Systems Printer
Characteristics
i. The printer conducts its internal processes in a single cycle. Therefore, when a particular process or operation is complete, the product is ready for use or for delivery to the specific marker or area of application
ii. Printing is done on a multicolour basis. The assemblies produced are of different colours with regard to the specific requirements
iii. The printer has features that enable it to combine several ingredients to pile up layers of materials on a product that was already made. Such a process is achievable by mixing diverse ingredients, tailoring them and coming up with a final product
iv. Computer...
2 Pages(500 words)Essay
...task per se. Simplicity may be associated with the fact that becoming a leader is overcoming the personal fears regarding how a person might perform a leadership role and demonstrating their inner self. Complexity is due to the fact that a leader must present and prove his/her inner self to others, which leaves the leader open and exposed to criticism. Leadership is independent of age, gender or power and can be found in all levels of organization. There are various models of leadership such as situational leadership, the four framework model and the three dimensional model among others. This paper, along with a visual model addresses significant points of an effective...
12 Pages(3000 words)Coursework
