English - Writing Directions - Essay Example

The following flow chart will help to clarify the actions that will be described: Choose a paint color and buy it ? set up the equipment and lay down the drop cloths ?put blue tape for delicate surfaces against all the edges ? use an angled brush to outline all the close edges ? open the can and stir the paint ? use a roller brush to fill in all the spaces in an X pattern After considering this flow chart, these are the directions. Instructions for Painting a Wall Painting a wall can be a source of achievement and pride when the room looks dingy and needs to be made to look fresh and alive.

The area around the wall should be cleared away so that access to all portions is made convenient and clear of items that could be in the way. Equipment must either be gathered or purchased, so the first thing to do once the wall area is clear is to make a list of everything that is needed, including the paint. Choosing the paint color is the first step in deciding to paint a wall. This can be done before the process begins or during the initial step as the equipment is being gathered. The wall will need to be taped off so that the edge beyond what is desired painted is protected.

A two inch angled brush is used to paint near the tape, allowing for a clean edge that has not bled into the space that is not desired to be painted. The walls are then rolled in an x pattern so that there are no roller marks. When this is done, it is allowed to dry and then the tape removed in order to check for bleeds. The equipment is cleaned up and the room put back into order. The following instructions will outline exactly how to do each of the steps involved in painting a wall. 1. The first step in painting a wall is in clearing away the items around the space in front of the wall.

This means that there should be enough room in front of the wall to put up a ladder. The ladder should allow access to every space of the wall that will be painted 2. The second step is to make a materials list, gather what is already on hand and go purchase the materials that are yet needed. Steps one and two are interchangeable, but it can be preferable to have my work space clear and to see exactly what will be required for the job. 3. A basic materials list includes screwdrivers, spackle, blue delicate surface tape, two inch angle brush, roller pan, roller, roller head, and ladder.

Do not forget the paint! 4. The third step is to choose the paint color, again interchangeable with steps 1 and 2. A paint color can be chosen long before the job will be done or during the trip to the store when all other materials needed will be purchased. One method of choosing a paint color is gathering paint sample cards from a store and taping them to the wall. There are many ways to choose a color and that will be up to the buyer. When purchasing materials, purchase the paint and it is recommended to use one of the new paints that have primer in them in order to get good coverage on the wall. 5. Once the materials are brought to the site of the wall they must be organized.

First, tools required to take off electrical plates and to fix any holes in the wall should go to one side of the wall away from the painting equipment and placed securely away from the wall so they can be grabbed, but not in the way. The floor should be covered with drop cloths to protect it from spills and drops that might damage