Contact Us
Sign In / Sign Up for FREE
Go to advanced search...

Occupational Health And Safety Management - Essay Example

Comments (0) Cite this document
One of every five-workplace fatality is a construction worker. Despite its high fatality rate, construction can be a safe occupation when workers are aware of the hazards, and use an effective Safety and Health Program. At construction site, there are many a times, a simple negligence can aggravate into a dangerous hazard…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER98.9% of users find it useful
Occupational Health And Safety Management
Read TextPreview

Extract of sample "Occupational Health And Safety Management"

Download file to see previous pages In the above context the present study observes the Hazards management of a building construction work site in a residential area. The study identifies the work process of the construction work site, types of hazards during the work process and controlling measures adopted for the identified hazards. Not only that the findings observed in the study are to be correlated and analyzed in the context of south Australian government statutes and existing implications on Occupational safety hazard management system for the effective utilization of the resources.
As a relevant place to the purpose of the study, the building construction in the area XYZ was identified as a potential source for the information as it uses modern ways of construction techniques and has relevant working patterns for the observation.
The study was carried by direct visit to the XYZ work site. The information on the types of hazards is being analyzed through the discussions with the workers and site inspectors. The information on techniques and safety measures adopted are taken from the site inspectors, Health and safety officer, Building contractors and higher authorities of local government.
Findings of the direct visit to the work site:
The direct visit to the XYZ has designed in such a way to extract the very key information in regard to the OSHMS practice, and the observed findings are as follows:
Working process:
The XYZ construction is a multi storied building site, with work in progress to observe the process and to discuss the essentials with the worksite workers.
In the work area the workers are involved in the occupations like, masonry works with load carrying, working from heights, plumbing, carpentry works, electrical works, etc.,
Masonry work: The work process of masonry involves construction of walls, ceiling and floor including 3 or 4 workers working at a same time. Workers are observed to carry the loads of bricks and cement mixture in wheelbarrows to the worker who actually works on the wall construction. The person who is working on the construction of wall is found to be on ladder with all daagjga
Types of Hazards observed in work site area:
The main types of probable hazards are occurring at the site are observed under 2 categories: 1. Physical Hazards 2. Chemical Hazards.
I. The physical hazards: These are the one, which are visible as well as have visible and instant effect on the victims. The following types of hazards are observed in this category.
a. Slip/Trip/Fall:
There is a high degree of risk observed to occur through these types of hazards, as the work associated with these is carried in a time constraints depending on the machinery and unpredictable weather
Falling of workers from High places
Accidents in Moving of loads
Falling of tools & construction supplies
Slipping on watery surface
Tripping down of heavy machinery
Slipping of ladders from supported wall to floor
b. Stuck by:
Usually the driver has to ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(“Occupational Health And Safety Management Essay”, n.d.)
Occupational Health And Safety Management Essay. Retrieved from
(Occupational Health And Safety Management Essay)
Occupational Health And Safety Management Essay.
“Occupational Health And Safety Management Essay”, n.d.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Occupational Health And Safety Management

Occupational Health and Safety Management (Part II only - Explaining the accident)

...?RUNNING HEAD: OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT Occupational Health and Safety Management School Occupational Health and Safety Management Background of the Accident The accident occurred in the kitchen of a cafeteria at 8:00 pm on December 24, 2010. The 30-year old assistant chef, Mr. Ray Wong, injured three fingers of his right hand with a knife while preparing dishes. The chef (the supervisor of Wong), the cleaner and a waitress were in the kitchen when the accident occurred. The investigation of the chef revealed that while Wong was slicing some vegetables, the waitress was about to get the food to be served to the waiting customers, and the cleaner was washing dishes at sink near the door. The cleaner was working hurriedly...
5 Pages(1250 words)Assignment

Occupational Health and Safety Management

...?You have just started a new job as the OHS Manager at a large national transport company. Explain to your CEO the benefits of ensuring a safe working environment. Include reference to Legislative, Financial and Moral reasons. Introduction: The roles and responsibilities of an Occupational Health and Safety Manager are very challenging. The wellbeing of workers is so important that negligence in this area could lead to poor productivity, negative publicity and higher risk of fatalities. This is especially true in the transport industry, where accidents are almost inevitable. Hence, as the OHS Manager of a large national transport company, successful fulfilment of my duties toward ensuring a safe working environment has implications...
4 Pages(1000 words)Essay

Management of Occupational Health and Safety

... This needs updated information, training, instruction to managers, supervisors, workers, clients, advisers, planners and designers. Strategies of handling hazardous material and their planning, implementation are more stringent now. Better training/planning is provided for safe working in contaminated and demolition sites with more informed management supervision. Pay conditions and policy level influences could be of more assistance because in spite of all the measures, job attraction is diminishing in this area. "Construction is increasingly seen as an unattractive occupation, low intellect work, poor working conditions and low pay. There has been a deskilling because of technology advancement," Improving Health and Safety...
10 Pages(2500 words)Essay

Occupational Health and Safety Management

...Occupational Health and Safety Management Most companies in today’s market place regard occupational health and safety as an integral part of doing business. It is considered the management’s commitment and responsibility to provide a safe and healthy workplace for its employees. Occupational injuries that occur at the workplace are considered to be failings within the management system, thereby setting standards for the management to abide. The first step to undertake is to set up a Safety and Health Policy which expresses the position of the company in relation to safety and health. The Safety and Health Policy statement should set forth the purpose and philosophy of the company, delineate the program’s goal and assign responsibility...
6 Pages(1500 words)Assignment

Systematic Occupational Health and Safety Management

President Bush, the Congress and the American people are united in efforts to eradicate trafficking in persons internationally and within national borders because this global crime opposes the universal value of freedom.
Power inequality characterizes the framework in which occupational health is addressed. The traditional system has been for companies to retain the services of company physicians, with a relationship to corporate management. Control over processes of diagnosis and treatment may be open to abuse. Managers do not want health problems to be linked to their actions or the work environment. This may affect the acceptable options for diagnosis: a diagnosis of Repetitive Strain Injury (RSI) may seem to pre-empt the...
1 Pages(250 words)Essay

The Role of Organizational Culture on the Management of Occupational Safety and Health

...Taking into account current theories and research on organizational culture and climate, critically appraise the role of organizational culture on the management of occupational safety and health. Any organized human activity, which is done in-group, will be most times constituted into structure called organization. So, Organization is a ‘structure’ with a ‘collage’ of workers doing their allocated work under the supervision of a leader, for the benefit of the organization as well as them. This team of workers like the five different fingers in one’s hand will be different from one another having different characters, attitudes, education, background etc, etc…and the unison of these different humans under a single organization to reach...
9 Pages(2250 words)Coursework

Management of Occupational Health & Safety

...Management of Occupational Health and Safety Introduction One of Britain’s worst industrial disasters occurred on July 6, 1988, when fire and explosions occurred on the Piper Alpha offshore oil and gas production platform in the North Sea. An explosion in the production module from the ignition of gas condensate leaking from a temporary flange led to the fire spreading rapidly. Soon after, a major explosion occurred from the rupturing of an incoming pipeline carrying gas to Piper Alpha, and the platform collapsed structurally. “Of the 226 men aboard the installation, 165 lost their lives as did 2 rescue personnel” (Flin et al, 1996: 263). The purpose of this paper is to investigate the disaster in terms of management/ indirect causes...
4 Pages(1000 words)Essay

Occupational Health and Safety Management

...and working pattern. The primary purpose of this management tool is to minimize the risk of occupational injuries, fatalities and illnesses. The standard set by OHSM is applicable to all types of organizations with any nature of business. Implementing OHSM standards provide benefits to the community and organization by reducing the injury and illnesses, minimizing the workmen compensation cost, reduced lost working days, increased productivity, improving product quality and reduce property damage. Occupational Health and Safety Management is relevant to all aspect of work. In an organization where hazard is low, health...
4 Pages(1000 words)Essay

Implementing Schedule of Time Management

...Running head: PHASE 5 INDIVIDUAL PROJECT PHASE 5: Individual Project Affiliation October 2008 How often have you heard it said that planning is waste of time? No sooner is the plan completed than someone comes along to change it. These same naysayers would also argue that the plan, once completed is disregarded and merely put on the shelf so the team can get down to doing some real work. To people management, we mean the planning activity that involves deciding on the types of people in form of resources that are required to fulfill the requirements of the project. In other words the types of skills and number of workers we need to complete the project (kwysocki, 1997). Whenever we talk about the methods involved in the project management...
6 Pages(1500 words)Coursework

Change Management

... of these, management must go out of their way to deal with organizational resistance to change because even the most carefully laid out or well intentioned changes can still meet resistance. Subsequently, an organisation’s ability to gain benefits from their change efforts is largely affected by their ability to create environments that encourage support and acceptance from other members of the organization. (Coetsee, 2003) Definition and application of resistance to change Some authors assert that resistance to change my be defined as behaviour that human beings depict when they are attempting to protect themselves from the effects of change; these effects may be real or they may be imagined depending on the situation under consideration...
10 Pages(2500 words)Coursework

Introduction to Change Management

Management often follows a “change management process” to change the existing process or activity.
Change management is a systematic approach for dealing with change that takes place in the organization as well as at the individual level. Such change management comprises of three aspects: adapting change, controlling it and finally affecting it. These three aspects of change management were well explained in three stages of change model given by Lewin (1952) and the three stages are “unfreezing”, “change” & “refreezing” (Orlikowski & Hofman, 1997). Another model for change was introduced by Prosci after conducting a research on more than 1000 companies from 59 countries....
7 Pages(1750 words)Case Study

Issues Connected to Human Resources Management

Notably, management professionals would agree, HRM system is an integration of various management practices with ‘people’ at its prime focus (Jackson, Schuler & Werner, 2008); and, the common factor between business organisations and educational institutions is ‘people,’ although their goals differ. This could be one main reason for attempting to implement HRM in educational institutions, although it is customized to organisational benefit.

Halachmi’s (2002a) extensive analysis on performance measurement clearly indicates the need for performance measurement in order to achieve the goals; and, it, in turn, establishes targets aligned to organisational goals and expectations; makes evalu...
8 Pages(2000 words)Assignment

Risk Management in the Airline Industry

With revenues in excess of ₤9 billion and a fleet of 245 aircraft as of March 2009, Heathrow-based BA’s risk management strategies provide an excellent example.
b) easyJet Plc, a Low-Cost Carrier, flying to more than 100 destinations in Europe, UK, and Northern Africa, and clocking over 50 million seats, with revenues of ₤2.4 billion in 2007-08 [2]. Covering over 380 routes with a fleet of 165 aircraft as of September 2008, Luton-based easyJet’s risk management strategies provide another excellent example with a different set of policies.

The airline industry, internationally, is characterized by its exposure to substantial operational and financial risks. Financial risks result in uncertainly in key pa...
6 Pages(1500 words)Case Study

People, Organisations and Management

Organizations and their management styles have evolved to a great extent in the service and manufacturing industry over the last century, and so have been the concepts of management and its functions. These evolutions can be traced to significant developments brought about by the industrial revolution, scientific management principles such as Taylorism and Fordism, transition of feudalistic to capitalistic approach and others in different sectors of manufacturing industries. However, the beginning of the industrial revolution was characterized by a rigid hierarchical bureaucratic way of organizing business enterprises, a style prevalent even today but only in military service organizations. Nevertheless, the manufacturing and busi...
8 Pages(2000 words)Assignment

Comparing Management and Leadership

Once a manager decides on something, his subordinates are required to follow whatever he tells them or else he would have to use the power and authority vested in him to reprimand those who go against his directives. Managers are not their own bosses and as such, they are motivated by the salaries which they are paid for their services. This also makes them subordinates who follow orders from their bosses and who hold them accountable for the progress or failure of the business. Management is a process that focuses on ensuring that there is stability in the organization as well as proper utilization of resources in order to create a harmonious environment for maximizing profits while also minimizing risks, which is the overall sen...
6 Pages(1500 words)Literature review

Nutrition and Lifestyle Management

Vitamins and minerals are micronutrients that are only required in small quantities but are indispensable in maintaining a strong and healthy body. Most individuals should be capable of obtaining all the nutrients they require by consuming a healthy, diverse diet, even though there are a few exemptions. For instance, females thinking about getting pregnant are advised to consume a folic acid supplement to prevent the abnormalities within the child. (What are nutrients? n.d.).

In this study, my case history is presented. I am 41 years of age and trying very hard to lose weight. There are no known diseases in my family that I know of and the only thing that I suffer from is severe constipation. Constipation may be a conti...
11 Pages(2750 words)Case Study

Logistics System Management

The logistics system is designed in such a manner as the combination of various facilities in the transportation at home, and the operations involved in the warehouse and the distribution channels for the manufacturing are the same. The supply chain is a collection of various complicated systems of logistics where they have a collection of raw materials and goods that are useful for the manufacturing of the final product and to the final distributors. “For example, in make-to-assembly (MTA) systems components and semi-finished products are manufactured in a push-based manner while the final assembly stage is pull-based. Hence, the work-in-process inventory at the end of the first stage is used to assemble the finished produc...
15 Pages(3750 words)Coursework

Project Management of Beijing Capital International Airport T3 Terminal

Some stakeholders can be both driving (positive) and restraining (negative) forces, it depends on how the project will meet their interests. These forces are marked by a dotted line. If changes happen, and the project won’t meet the interests of some of these stakeholders, a vector of the corresponding force will be changed onto the opposite and the force will move onto the opposite part of the diagram.

Each half of the diagram (left and right) is divided into three parts – Low, Medium and High. It defines the size of a force vector and indicates the importance (power) of a given force. Short forces have a low level of power.

Civil Aviation Administration of China (CAAC) – undoubtedly advanc...
7 Pages(1750 words)Assignment

Occupational Marine Safety and Health Management in the USA

The US Marine Corps ORM manual highlights the processes and steps that must be adhered to, for the maintenance of quality service and safety. The nature of militants’ operations, particularly combat operations, is quite complex, demanding and involves a lot of risks. In order to operate effectively, the ORM manual has integrated two important aspects: safety and risk management, in decision making. This helps the leaders and commanders to strategically plan and execute their daily missions. The ORM enables US Marine Corps to discharge their duty, with minimal losses and in a timely manner. Therefore, ORM has proven to be an invaluable tool for the U.S Marine Corps operations.
The Oxford Learners Dictionary defines risk...
33 Pages(8250 words)Research Proposal
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Essay on topic Occupational Health And Safety Management for FREE!

Contact Us