Nobody downloaded yet

Construction technology - Essay Example

Comments (0) Cite this document
Compressive strength is one of the important parameters used for characterizing concrete. Measurement of its strength is done normally with an interval of 7 days. After 28 days whatever strength is obtained is known as its Characteristics Strength which is defined as strength of material below which not more than 5% of the test result are supposed to fail.1 Generally its strength distribution is of normal type having 95% area at the left side of day 28.
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER96.3% of users find it useful
Construction technology

Extract of sample "Construction technology"

Download file to see previous pages The curve fitting was done in MATLAB 7.0 using Least Mean Square Algorithm. LMS algorithm is nothing but one curve fitting tool to keep overall error minimum throughout the data range. Hence from the above graphs we can easily conclude about the behaviours of compressive strength with respect to concrete days, rebound number and pulse velocity. ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(“Construction technology Essay Example | Topics and Well Written Essays - 500 words”, n.d.)
Retrieved from
(Construction Technology Essay Example | Topics and Well Written Essays - 500 Words)
“Construction Technology Essay Example | Topics and Well Written Essays - 500 Words”, n.d.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Construction technology

Building construction technology

...of the centre, similar to the form used for the basement. It is assumed that some of these were suspended; others were used in the walls and also in columns. The methods of construction followed the listing below (Structural and Building Technology, 2010): In suspended slabs: fix top and bottom steel to bar chairs at the level required using tie wire. The chairs should be not more than a meter and a half apart for the top steel and closer than this for the bottom steel. In walls: use plastic or steel spacers to separate the bars and to provide the necessary side cover. (Plastic spacers will not support the weight of reinforcement as do steel chairs.) In columns: provide spacers outside the reinforcement...
8 Pages(2000 words)Essay

Company law

4 Pages(1000 words)Essay

Construction technology

...?QS Integrated project Insert of The current great improvement in technology in the design and construction sector has seen the designers move from the traditional methods to the modern methods of construction which brings more durability, aesthetic value and more comfort and style in the construction sector. Modern methods of construction have added value in the construction sector by employing new methods of constructing the frame using precast concrete, in situ concrete, steel or timber (natural sawn and engineered). These especially are required to help improve on the strength and stability, durability and a building...
3 Pages(750 words)Coursework

Construction Technology and Innovation industry is also embracing the use of ready-made parts, which are then pieced together. Unlike traditional houses, modern houses are built using concrete moulds and steels. A number of techniques have been embraced by those using modern construction methods. One of the popular techniques is the adoption of volumetric approach, which entails construction of three-dimensional modular units (Pan, Gibb & Dainty 2007, p.183). According to Parliamentary Office of Science and Technology (2009, p.3), other common modern methods of construction include the use of floor and roof cassettes, pre-cast concrete foundations, and pre-formed wiring looms. In...
4 Pages(1000 words)Essay

Construction Technology

...? Construction Technology Q d. Cold roof There is a design of the cold roof that has an attic space that is not ventilated. In this kind of design, the placing of the cold roof insulation is done in the same way as the one with ventilation and the ceiling of sealed completely so that it can be in a position of preventing any air from entering into the attic gap. A polypropylene membrane that is breathable is then used as the roof underlay. This is important as is enhances the diffusion of the moist air that is inside through it, while keeping the moisture outside from getting inside. There are no ventilations and the air in the gaps leave via the breather membrane (Lstiburek, and Carmody, 2004). The condensation’s risk is low... air. The...
10 Pages(2500 words)Essay

Construction Technology 2

...111First Last Construction Technology 05 May Critically Analyse The Use of Standard Fire Curves For Determining Fire Resistance. How And Why Does The Approach Vary For Offshore Applications. Fire resistance as a phenomenon generally refers to the ability of structural members to withstand conditions of heat and combustion in circumstances or incidents of fire outbreak. Typically, the component parts of buildings or structures are the primary objects of assessment in such conditions, within the context of tests on them to determine their fire resistance rating, where design fires are used to simulate real fire. Standard fire curves are used to generate temperature-gradient properties of the members under...
8 Pages(2000 words)Essay

Construction technology

...QS Integrated project Insert of Introduction Designing of the appearance, location and organization of any place for commercial use and comfort of the users is the priority considered by designers and contractors. Space is always limited as the population in every region is escalating at a higher rate than formally known or expected. Limited space therefore has to be utilized for maximum output that can be offered by the resource. This has to ensure that proper planning and construction mechanisms have to be put in place to allow for the achievement of this important intention. Planning purposes are however very complicated in residential areas where several requirements have to be considered and put in place to ensure...
3 Pages(750 words)Coursework

Construction Technology and Innovation

...CONSTRUCTIOn TECHNOLOGY and innovation al Affiliation) Introduction The construction industry in UK has undergone a series of advancements since the early days. Through technology and innovation of the industry: enhanced methods of construction, forms of buildings and innovative construction products, the industry has climbed to a greater competitive edge. One of such innovations that have received a lot of attention in the construction industry due to its benefits is offsite construction. These are construction activities carried in the factory atmosphere away from the construction site. The need for innovation in the UK construction industry has been driven by a myriad of key aspects. Among the key aspects are; the rising cost... of...
3 Pages(750 words)Assignment

Construction Technology and Innovation

... Construction Technology and Innovation By: Construction Technology and Innovation With newer inventionsin building technology and the need to construct sustainable, safe and cheaper buildings, there have been advances in the forms of various buildings, and in the methods of their construction in the UK. The architecture of the UK in particular has undergone a lot of revolutions as to the various forms of buildings currently being constructed (FLICHY 2007, pg9). As the European building codes become more advanced and in use, newer and better construction methodologies and conventional methods have emerged. These have helped in increasing the efficiency of buildings, making them perform their functions better and in the reduction... such as...
4 Pages(1000 words)Essay

Construction Technology and Innovation

...Proposal A Bioskin facade Bioskin façade is a new technology where a water cooling façade system is utilized in making the building absorb heat through water evaporation through water evaporation. The concept is based on the traditional ritual of Uchimizu. The ritual was a way to curb the dust around their houses by sprinkling water around them. The technology has been established as a way to reduce the exterior temperature of the building by 12 degrees and the micro environment by 2 degrees. It is a technology that is described as elegant and simple. This technology is a solution to the energy used in the proposed buildings for cooling. The technology...
8 Pages(2000 words)Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Essay on topic Construction technology for FREE!

Contact Us