StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Height and the Weight of the Mother, with structure - Lab Report Example

Cite this document
Summary
The specifics of the study is as illustrated in the sections. The data was defined, collected, organised, visualized and analysed in details an observed the following.
The objective of…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER98.4% of users find it useful
Height and the Weight of the Mother, with structure
Read Text Preview

Extract of sample "Height and the Weight of the Mother, with structure"

Download file to see previous pages

The taller mother’s with an Q2 average 1.68 tend to weigh more that the mother’s with Q1 of 1.58 at 50.57Kgs. The average mother’s weighs around 58 kgs and the average BMI of 22. The age of mother’s is around 28Kgs. As the age increases, the height increases and the weight increase too. Taller mothers have a higher BMI than the shorter, thus the height of the mother has an effect on the weight of the mother and has a direct correlation with the BMI. Age does not affect the height of the mothers.

There is a moderate correlation between BMI and gestation days. Mother’s with a high BMI tend to have longer gestation period. The average gestation day of a mother is 279 days and with an average of 22 BMI. The BMI effect on gestation period can be traced to weight factor; thus mother’s who have a higher BMI have a probability of having longer gestation period. Further, taller mother’s have a higher BMI; thus the probability of the taller mother’s having longer gestation period is

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Height and the Weight of the Mother, with structure Lab Report”, n.d.)
Height and the Weight of the Mother, with structure Lab Report. Retrieved from https://studentshare.org/mathematics/1667004-height-and-the-weight-of-the-mother-with-structure
(Height and the Weight of the Mother, With Structure Lab Report)
Height and the Weight of the Mother, With Structure Lab Report. https://studentshare.org/mathematics/1667004-height-and-the-weight-of-the-mother-with-structure.
“Height and the Weight of the Mother, With Structure Lab Report”, n.d. https://studentshare.org/mathematics/1667004-height-and-the-weight-of-the-mother-with-structure.
  • Cited: 0 times

CHECK THESE SAMPLES OF Height and the Weight of the Mother, with structure

Architecture of the Shard Skyscraper

The tower has a height of three hundred and ten meters above the ground.... A Critical Article on Architecture By Name Presented to Course Institution June 3, 2015 A Critical Article on Architecture Introduction For a long time, St Pauls Cathedral has been known to be the tallest building in the United Kingdom with unique architectural features....
4 Pages (1000 words) Coursework

Wind Load Effects on Skyscrapers

The Taipei 101 structure remains the building with the largest TMD weighing over six tons.... This massive structure was constructed using advanced technology providing a significant breakthrough for the engineering industry.... The massive structure has contributed towards the capacity for the building to withstand numerous typhoons, common in Asia.... The planning for construction of skyscrapers begins with consideration of various elements among them cost, economic efficiency and strength of the structure(Chew, 2001)....
15 Pages (3750 words) Essay

Concept Design Report

the weight of the bridge was capped a t a maximum of 300 grams.... Construction Constraint the weight of the used glue was considered negligible.... Quality Control Testing The estimated weight of sticks with glue was almost equivalent to the weight of the Popsicle sticks without glue.... Two bridge models were considered in the project with their specifications as follows; Bridge 1: 115 Popsicle sticks used the weight of the bridge is about 124....
2 Pages (500 words) Essay

Aircraft Maintenance and Structures

eing a cumbersome exercise to undertake, especially its either wings or tail dragger, there might be need to determine the middle of gravity and balancing the aircraft might necessitates the need for extra support, this weights that are used to support in the actual weighing process must be exempted from the weight of the plane by determining the tare weight.... This is the final weight of all equipment's that are used up the machine and deducting the weight of the supporting tools to arrive at the actual aircraft weight (Baker et al 2012, 45)....
4 Pages (1000 words) Assignment

A Research On Earthquake Resistant Building Construction

However, due to forces of inertia, the building's weight somehow changes and, hence, causing failure of the building.... Earthquakes refer to sudden movements or shaking of the earth surface.... The writer of the paper "A Research On Earthquake Resistant Building Construction" discusses the reasons that cause building to fail in the event of an earthquake and analyzes how to avoid it....
4 Pages (1000 words) Term Paper

The Planar Truss System Steel Truss Bridge

nbsp;… As the paper outlines, in order to estimate the dead weight of the bridge truss system, the steel chamber's weight had to be evaluated per every unit length and the entire length of the truss.... nbsp; In order to estimate the dead weight of the bridge truss system, the steel chamber's weight had to be evaluated per every unit length and the entire length of the truss.... The total weight of the concrete used in the bridge was 24 Newtons per Cubic meter according to table A1, AS/NZS1170....
4 Pages (1000 words) Assignment

The Structure of the Glider

hellip; Accordidng to the report hang-gliders are piloted aircrafts with cloth wings as well as minimal structure.... Both kinds of aircrafts are all subjected to drag, weight, and lift forces.... A glider must generate lift so as to oppose its own weight for it to fly.... With nothing to oppose the drag, a glider will rapidly slow down till it can no longer produce adequate lift to resist its weight, and falls down to the ground finally....
5 Pages (1250 words) Assignment

Engineering and construction: Exogenous and Structural Constraints

For instance, someone now requires some structural component(s) that can gather the weight from the floor plate and effectively transmit it to the ground.... Therefore, mechanical depth, ceiling height and structural depth form a mutually constrained combination such that when considered in together with the needed floor-to-ceiling height, they must not contravene the controls on the tolerable floor-to-floor height....
6 Pages (1500 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us