StudentShare
Search
Free

# Conversions in the Metric System - Assignment Example

Summary
This assignment "Conversions in the Metric System" discusses conversions in the US system of measurements. The assignment analyses two informative websites that cover metric and or customary units. It discusses the similarities and differences between the two sites…

## Extract of sample "Conversions in the Metric System"

As such, when a value in ‘cm’ or centimeters needs to be converted to ‘km’ or kilometers then one should note that 1 meter is equivalent to 100 cm whereas 1 km makes 1000 meters from which to figure that 1 km would be 100,000 cm.

The two informative websites are http://lamar.colostate.edu/~hillger/common.html which presents the commonly used metric system of units and http://www.conservapedia.com/US_Customary_System_of_Units which demonstrates the US customary system of units. In the metric system, quantity pertaining to length, thickness, distance, or girth is measured in terms of ‘meter’ while the customary system consists of an inch, foot, yard, and mile (statute or nautical). Based on metric units, the volume may be in milliliter (mL), cubic centimeter (cm3), liter (L), and cubic meter (m3) whereas based on the US customary units, the liquid volume is quantified by the units in wide use like ounce, pint, quart, and gallon. I prefer the site for customary units because most people have become accustomed to them especially with reference to commodities in the marketplace and other commercial establishments where measurements can be pictured with ease through containers and corresponding shapes that represent customary units. Read More
Cite this document
• APA
• MLA
• CHICAGO
(Conversions in the Metric System Assignment Example | Topics and Well Written Essays - 250 words, n.d.)
Conversions in the Metric System Assignment Example | Topics and Well Written Essays - 250 words. Retrieved from https://studentshare.org/mathematics/1601284-math-5
(Conversions in the Metric System Assignment Example | Topics and Well Written Essays - 250 Words)
Conversions in the Metric System Assignment Example | Topics and Well Written Essays - 250 Words. https://studentshare.org/mathematics/1601284-math-5.
“Conversions in the Metric System Assignment Example | Topics and Well Written Essays - 250 Words”, n.d. https://studentshare.org/mathematics/1601284-math-5.
Click to create a comment or rate a document

## CHECK THESE SAMPLES OF Conversions in the Metric System

### Parliamentary System VS Presidential System

...? Parliamentary System VS Presidential System Parliamentary System VS Presidential System Democratic governments are those that permit the nation's citizens to manage their government either directly or through elected representatives. This is opposed to authoritarian governments that limit or prohibit the direct participation of its citizens. Two of the most popular types of democratic governments are the presidential and parliamentary systems (Parliamentary Versus Presidential Governments, 2011) Different types of political systems prevailing in the current world. Broadly speaking, based on the nature of functioning the entire political systems in the world can be classified into tow; democratic systems and totalitarian systems...
10 Pages(2500 words)Essay

### Coroner system and medical system

...?Medical Examiner System and Coroner System History The coroner system can be traced back to ancient times in England. The coroner office was established in 1194 in England who came under the jurisdiction of justices at that time. At that time coroners had the authority to arrest and investigate deaths in accordance to their nature. The office at that time was run by the income of these coroners who could confiscate property in cases where they felt the death was unnatural. It was in 1194 that the coroner office was made permanent in the United Kingdom. In 1877 laws were established so that the coroners could investigate any death that they considered unnatural. Later on the coroner system established itself as an agency and in 1888...
3 Pages(750 words)Research Paper

### System Information System Planning & Management

...? SYSTEM INFORMATION SYSTEM PLANNING & MANAGEMENT System Information System Planning & Management Executive Summary The purpose of this report is to highlight on the evaluation of variant technologies that Greens Lime Mouldings (GLM) intends to employ for its future prosperity. The company has maintained both stiff competition to its competitors and outstanding performances, through output provision to the customers. This report encompasses various sections such as: Introduction, which will offer a brief explanation of the company and the project’s objective. The methodology section entails different mechanisms through which the company will employ to achieve the info for success. The report findings will provide the actual issues...
9 Pages(2250 words)Report

### White Paper Risk Analysis Metric Machine Parts Supplies Corp

... means that the network has to function as designed and produce the required results that are accurate to avoid interruptions caused by the systems crashes, which the company is experiencing today. Scalability means that the network must support the rapid growth rate at Metric machine parts and supplies and also support the plans for acquiring the various parts suppliers. For Metric machine and parts supplies to have a new design security of data is a priority, and, therefore, to achieve this security, some processes and procedures need to be followed and implemented. White (2011) further adds that Metric machine parts and supplies does not need to rely on other network management teams to operate its network. It has its own small team...
4 Pages(1000 words)Assignment

### Metric Machine Parts and Supplies Corporation

...? Metric Machine Parts & Supplier Corporation A network problem exists in the Metric Machine Parts Supplier Corporation. This white paper addresses the problem and proposes the relevant solution. 1. Definition of The Business/ Technical Problem Currently, Metric Machine Parts and Supplier Corporation is facing problems in the area of network management and low level of customer satisfaction. The company incorporated the heavy network and tried to manage it with the help of an outsourced network management facility. The problem arose when the outsourced network management company did not properly address the networking problem. Managing the customer base of around 75,000 all around the world required that heavy network management facilities...
3 Pages(750 words)Research Paper

### Inquisitorial System & Adversarial System

...Table of Contents Table of Contents 2 Introduction 3 The Legal System 3 Prime Components of the Legal System 4 Civil Law 4 Common Law 5 Religious Law5 Methods of revealing evidence in Court 6 Inquisitorial Procedures 7 An Introduction to the Inquisitorial Legal System 7 History of the Inquisitorial System 7 Modern Features of the inquisitorial System 8 Adversarial Procedures 9 Distinction 12 Conclusion 14 Introduction The Legal System Primarily, there exist three major legal systems in the world; the common law, civil law, and the religious laws. Except for these, there also exist other legal systems such as Customary Laws, Common & Civil laws (which is a blend of both; Common and Civil), Muslim Law, and some Unknown / Undecided laws...
11 Pages(2750 words)Article

### Deviation in the process metric

... in the process metric needs to be analyzed for root cause so that it can be removed and performance can get back on target. So attempts to remove or replicate a deviation that occurred in the past are being made as a reaction to those changes. Shukla (2005) advises to use improvements from the reactive phase that help to create a new, improved baseline. Firstly, the cause of performance decrease should be analyzed. In the reactive state, the team looked at cause and effect. In proactive mode, attention shifts to the "likely cause" and "likely effect." Lean teams in this phase spend time shaping the future: looking for potential problems and opportunities and ways to avoid or exploit them. After the potential problem analysis, the team...
6 Pages(1500 words)Essay

### Giving reasons for conversions

...Reasons for Conversions Those who were not Muslim agreed to give up a lot of their freedoms in return for protection and exemption from the militaryservice. Christians and Jews paid a high price to guarantee their protection amongst those who were Muslim, as well as protection from others. Some of the possible reasons for some of the conversions can be found in the pacts themselves. The loss of rights and freedoms, as well as the lack of being able to show others their religion, or convert others, can be seen as an insult to Christians and Jews. They were not allowed to flaunt their pride and their love for their specific religions, but instead had to do everything behind closed doors and away from the eyes of the Muslims. If Christians...
2 Pages(500 words)Essay

### Thinking Globally; Do you think the US should convert to the metric system

...Should The US Convert To The Metric System? The metric system of measure is defined as a decimal system that is based on the integer or number 10. The metric system was introduced by France during the French Revolution. The system has not been adopted fully in the United States and it is difficult to understand why the system has not been adopted fully. The system should be adopted fully because it has more advantages than disadvantages. The metric system is more accurate or precise than the system utilized in the United States. The system that is used in the United States relies on ounces, pounds, quarts and other measures, which are not reliable. The system has proved beneficial in baking for the reason that baking is a science where...
2 Pages(500 words)Essay

### Microprocessor System and Application

In a computer, a processor commonly involves one or more microprocessors (also acknowledged as chips), which are silvers of silicon or other substance stamped with many little electronic circuits. To perform operations on data, the computer passes electricity all the way through circuits to execute an instruction (Norton 2001.p. 5). The innovation in technology has brought a lot of facilities for us. We have better ways of life and all the facilities regarding better production and domestic tasks. Such as in the industrial production we have automatic robots that are welding, packing, moving and carrying out several other development-related tasks. These robots are pre-programmed and microprocessors based chips are controlling all...
6 Pages(1500 words)Assignment

### Structure of the Educational System in Morocco and Its Capacity for Addressing the Needs of the Hospitality Industry

...Independent Research Study An investigation into the Structure of the Educational System in Morocco and its Capa for Addressing the Needs and Expectations of the Hospitality Industry in the Country Submitted by : Submitted to : Course : Date : September 29, 2009 Word Count : 3,069 words STATEMENT OF AUTHORSHIP “I confirm that no part of this work, except where clearly quoted and referenced, has been copied from material belonging to any person e.g. from a book, handout, another student. I am aware that it is a breach of GIHE regulations to copy the work of another without clear acknowledgement and that attempting to do so render me liable to disciplinary procedures.” ________________ Table of Contents I. Consultant’s Brief 4...
15 Pages(3750 words)Research Proposal

### Examination of the Thyroid System

In 2006, his gallbladder was removed. He takes over-the-counter anti-histamines, as needed for allergic rhinitis symptoms.
Personal and Social History: Mr. "S" is a 73-year-old widower who usually eats the organic food produced from the animals and the fruits and vegetables on his farm. He has two to three beers in the evening after dinner every night. He weighs 235 lbs and measures 5 10" tall.

Whether there is any family history of swelling in the limbs? Is the swelling present anywhere else other than the lower leg? What precipitates the shortness of breath and how long does it last? Is the shortness of breath severe? How long does he need to rest to overcome the shortness of breath? Does he feel dizzy when his b...
9 Pages(2250 words)Case Study

### Identification of problems in the Criminal Justice System of the US

They are on trial and will be dealt with fairly. These laws ensure that no one, even if he or she has committed a crime is abused or punished cruelly.
Following the history of civilization like in china, we see the traces of systems for Criminal justice in order to provide safety for the citizens. Evolving through the years laws have been modified and changed to form the system that we know today.
From its start, the “U.S. criminal justice system” has advocated the idea of “checks and balances”. To avoid dictatorial rule, the people who founded this system in such a way that one person was not given control or authority completely to punish the criminals. The idea of assigning a ‘jury...
6 Pages(1500 words)Assignment

### Economic Models: The Free Market and The State Owned System

The free market concept is mainly a theoretical concept as every country, even capitalist ones place some restrictions on the ownership and exchange of commodities (Free market economy). Therefore, the term free-market economy primarily means a system where the buyers and sellers are solely responsible for the choices they make. It gives the buyers and sellers the power to do business without being afraid of any regulations and intervention by the state. Hence, a free market gives the absolute power to prices to determine the allocation and distribution of goods and services (Free Market Economy). The pricing mechanism is in turn, driven by the forces of demand and supply of goods and services. Demand and supply of...
9 Pages(2250 words)Case Study

### Logistics System Management

The logistics system is designed in such a manner as the combination of various facilities in the transportation at home, and the operations involved in the warehouse and the distribution channels for the manufacturing are the same. The supply chain is a collection of various complicated systems of logistics where they have a collection of raw materials and goods that are useful for the manufacturing of the final product and to the final distributors. “For example, in make-to-assembly (MTA) systems components and semi-finished products are manufactured in a push-based manner while the final assembly stage is pull-based. Hence, the work-in-process inventory at the end of the first stage is used to assemble the finished produc...
15 Pages(3750 words)Coursework

### Key Problems of Incentive System implemented at Rainbarrel

Hiram Phillips at Rainbarrel Products also implemented a Performance Management System that although resulted in significant cost reductions and cost efficiency, yet it resulted in some severe setbacks that destroyed overall efficiency. Some key customers were dissatisfied with the behavior of workers at different Rainbarrel departments as well as interdepartmental conflicts/disputes had been observed. (Daft, 2009)

The very first problem with the Incentive System was the dismissal of 10% of employees from all the departments at Rainbarrel. As a result, Rainbarrel also lost some of its best employees that were employed and servicing in top-performing departments. Most of the workers that were laid off were of low managem...
7 Pages(1750 words)Assignment

### Management Information System of Linux

As emphasized by GB direct (n.d.) “one of the principal reasons for the growth of open-source software is its affinity with this business model” (par. 8). The support applications specifically come in the form of “helpdesk advice and diagnostic research and direct intervention to diagnose and resolve problems” (GB direct, n.d., par. 24).

The helpdesk application of open source software “backs-up and extends in-house resources when they are approaching their limits” (GB direct, n.d., par. 26). Even unskilled staff or personnel without any technical knowledge of software applications are assisted by the program to back-up relevant files. This support mechanism of open-source software ca...
6 Pages(1500 words)Assignment

### Computer System Security of the Plantain Building Company

The Information system comprises hardware and software which adds functionality to the system according to the business requirements. Human beings are required to only trigger the systems in order to contribute to business functions. (Paul, 2010)

Is it vital for Small medium enterprises to perform knowledge management tasks? Knowledge is been renowned as an economical contrivance for the organization's endurance. Small-medium enterprises often face knowledge management failures resulting in business loss. (Chan, Ivy, and Chao Chee-Kwong, 2008). The impact of the effective use of Information systems is essential for business professionals, managers are other knowledge workers. The information systems facilitate the busin...
7 Pages(1750 words)Case Study

### Features of Juvenile Justice System

Each of the members shall, thus, introduce themselves in terms of their educational background and personal experiences for familiarity purposes. Let us begin with Mr. Colbert.
Colbert: I work at Quad Enterprises in the HRM department as the chief manager. I am overly concerned with the current juvenile justice system, bearing in mind that numerous people have debated upon it since time immemorial. I take a categorical interest in this issue since I have been a victim of juvenile violence. My opinion regarding the current trends in this law field is nobly affirmative. The current juvenile system is perfect. Thank you.
Amanda: I currently am a Law lecturer at a University. I am extremely interested in this issue too. My e...
7 Pages(1750 words)Essay

### Metric Pattern Cutting for Menswear

Shocking! The author also has discussed the point of view of parents when it comes to the social networking of teenagers.
According to an author and some research by social scientists, social networking is beneficial for teenagers (Ryan 2011). Social networking can be the source of generating new ideas and innovative thinking (Cross & Parker 2004). The article argues with the idea that teenagers become unwilling to meet their friends face to face by too much social networking. There have been several kinds of research and the evidence proves that social networking can play a great role in generating innovative ideas and it causes no harm to teenagers when it comes to meet face to face with their friends (Lusted 2011).
7 Pages(1750 words)Assignment