SMART Criteria and Installing the Switching System - Essay Example

Whenever there is motion in the room the switching system shall be in standby mode. Light detectors shall then be engaged when the level of light reduces which shall turn the lights on. Motion detectors shall be the primary switching control to put the switching system on standby mode. The motion detector shall be installed by using laser technology to enable sensory of even the smallest movements within a room (Fraden, 267). The light detectors will be the second switching level turning on the lights when low levels of light are detected in the occupied room.

Measurability

The progress of the project shall be based on the set timetable for the plan. Each step in the installation of the switching system shall be analyzed before going forward to the next step. The first step has been laid down as wiring the house. This will be done to ensure the circuit is well-placed and in the desired manner. This step is expected to consume the most time as it involves a lot of physical work. The goals of the plan shall be measured against the time laid down for the expected progress. The installation of the circuit should adhere to the installation standards (Linsley, 144). These include the wiring safety codes and the color codes used internationally. Other national standards shall also be applied in measuring the suitability of the installation of the systems. Comparing the setting of the switching system with the set standards shall provide a platform for measuring conformity to standards. This will ensure that the end product not only works perfectly but is also safe and conforms to set standards.

Attainability
The need to install the switching system arises from the desire to switch off unnecessary lights. The aim of installing this new system will be to ensure regulation of the amount of wasted energy. Providing proper control to the usage of light shall immensely reduce the costs incurred from energy-related bills. Evidence exists to show that this method can be able to save up to 25% of energy consumption, reducing energy costs by a similar margin (Klaus D. John, 97). This regulation will occur by providing a system that allows for the usage of light only when necessary. The number of lights left on overnight shall also be minimized by using this system. Read More