Contact Us
Sign In / Sign Up for FREE
Go to advanced search...
Nobody downloaded yet

Rolling Cylinders - Lab Report Example

Comments (0) Cite this document
This lab report "Rolling Cylinders" is aimed at investigating the effect of relevant variables on time (T) taken by a cylinder (hollow as well as solid) while rolling down on an incline…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER93.1% of users find it useful
Rolling Cylinders
Read TextPreview

Extract of sample "Rolling Cylinders"

Download file to see previous pages The angle was measured by the use of a clinometer. Distance traveled was measured using a light beam and light beam sensor. The following measurements were made for a set of five hollow cylinders and one solid cylinder.
Time to travel certain distance ‘L’ on an inclined surface depends on the angle of inclination as reflected in table 1 and Fig.5. The time decreases with the increasing angle of the slope. This observation is in conformity with equation (8) which predicts this inverse dependence as the square root of the sine of this angle. This also comes from the common sense which will predict shorter time on a steeper incline and vice versa.
From table 2 and Fig. 6, it can be seen that time to travel is increasing, provided all other variables remain the same. This is also expected. However, this dependence is not linear, which is also in conformity with equation (8).
Time to travel certain distance L is increasing with increasing outer diameter. This is because; increasing outer diameter increases the moment of inertia and therefore, decreases the angular as well as linear acceleration. This is the reason why it takes longer to travel the same distance.
Time to travel certain distance ‘L’ shows an increasing trend with increasing inner diameter and vice versa. This is because, increasing inner diameter leads to an increased moment of inertia and therefore, a lower value of acceleration and hence a long time to travel. This effect is the same as that of outer diameter.
These experiments explicitly demonstrate that time of rolling increasing angle of slope and decreases with increasing length and an inner and outer diameter of the cylinder, while the length of the cylinder has no impact on the time of travel of a rolling cylinder on an inclined surface.
A rectangular beam clamped at one end forms a cantilever. Let us consider a cantilever beam (Fig. 1) of width (b), thickness (d) and overhang length (L). ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(Rolling Cylinders Lab Report Example | Topics and Well Written Essays - 4000 words, n.d.)
Rolling Cylinders Lab Report Example | Topics and Well Written Essays - 4000 words.
(Rolling Cylinders Lab Report Example | Topics and Well Written Essays - 4000 Words)
Rolling Cylinders Lab Report Example | Topics and Well Written Essays - 4000 Words.
“Rolling Cylinders Lab Report Example | Topics and Well Written Essays - 4000 Words”.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document


Explore how Bob Dylan portrays transient figures in Like a Rolling Stone, and discuss how these portrayals contribute to t

...Rolling Cylinders... Rolling Cylinders... Explore how Bob Dylan portrays transient figures in “Like a Rolling Stone,” and discuss how these portrayals contribute to the central message of the song. The lyrics of Bob Dylan's classic song "Like a Rolling Stone" are based in the philosophy of the Beat movement in the 1950's and 1960's in America, which were heavily influenced by the tenets of Eastern mysticism and European romanticism. The year 1965 represented a turning point and evolution in the American counter-culture movement, changing from being a minority, underground experience to becoming a mainstream, commercial event with the advent of rock’n’roll. The Beat Movement as represented by Kerouac, Ginsburg, Burroughs, and many other poets,...
5 Pages(1250 words)Research Paper

Diffusion in aluminium alloys, Hot deformation (rolling) of aluminium alloys and its dynamic recovery, dynamic recrystallisation

...Rolling Cylinders... Rolling Cylinders... 2: Literature Review: Diffusion of Aluminum alloys 2 Diffusion Diffusion or the movement of solute particles from high concentration to low concentration in order to obtain an equilibrium and even spread forms the basic mechanism through which processes like homogenization, solution and aging occur. Diffusion also leads to the changes in the micro-structure s such as grain boundary movement and recrystallization (Askeland and Phule, 2003). Diffusion rates are calculated from the following equation: D = Co exp(-Q/RT) Where: D= rate of diffusion T = absolute temperature (273 K) Q = Activation energy required to make atom move R = Gas constant Co = Constant Thus the rate of diffusion is dependent on time and ...
10 Pages(2500 words)Dissertation

Rolling Over the Native Culture

...Rolling Cylinders... book "Fools Crow", by James Welch, ends with the main character standing amidst his tribe that had been overtaken by the Europeans. This once proud warrior had been forced to submit to the European's superior ways. Yet, he has a vision of the future that one day they would return to their place of rightful prominence, for as Fools Crow states; "They were the chosen ones" (390). His culture collided with the white Europeans during three centuries of competition for land, religious superiority, and natural rights. As the 19th century drew to a close, the Indians had been relegated to reservations while the spoils of war went to the victorious Europeans. In our competitive world, we are tempted to make the usual judgment...
11 Pages(2750 words)Essay

Anhuser-busch buys rolling rock brands

...Rolling Cylinders... Rolling Cylinders... the history of its brewing operations, Rolling Rock had only two acquirers thus far. Anheuser-Busch, the largest brewer in North America, was the first company to purchase the brand in 2006 from original owners InBev, the company formed after the merger of Belgian-based brewing corporation Interbrew and South-America’s largest brewing company AmBev. The deal was closed at $82 million (Boselovic). Two years later, in July 2008, InBev bought Anheuser-Busch for $52 billion and reacquired ownership of Rolling Rock. The merged company was also renamed Anheuser-Busch InBev (Anheuser-Busch InBev). However, although the company’s net profit sales have increased, the volume of beer has lowered and the Rolling Rock ...
2 Pages(500 words)Research Paper

The Rolling Stones

...Rolling Cylinders... Rolling Cylinders... Rolling Stones Rolling Stones have been in existence for over forty years. The original founder of Rolling Stones was Brian Jones. This took place in England in 1962. Brian was a talented musician who could play various instruments. He became famous when playing Blues in London club. He sought musicians to join his new band he was about to form through advertisement. Ian Stewart a pianist was the first person to join this band. Others members joined later. The band was named after a Muddy Waters song known as “Rollin’ Stone Blues.” Their first performance was on 14 July 1963. This took place at the Flamingo Jazz Club in Soho, London (DeRogatis and Kot 16-20). This paper seeks to discuss the Rolling Stones ...
2 Pages(500 words)Essay

Rolling Stone Magazine Content

...Rolling Cylinders... Stone Magazine Content The specific magazine advertisement is from Rolling Stone magazine. The specific magazine environment for the Rolling Stone magazine was on a table shared by a number of people. The editorial environment was largely focused on music stories. One considers that Rolling Stone is a music magazine and the editorial focus on music stories is not a real large surprise. Specifically, the music artists featured were mainstream pop artists such as Lady Gaga, the Strokes, and Nickelback. Still, there was a featured on how Republican presidential candidate Mitt Romney engaged in unethical behavior before he became governor. The leading title article – an article on the movie Prometheus – does not relate to the...
1 Pages(250 words)Essay

A Campaign Plan for Release of Rolling Stones` Hardcover Book 50

...Rolling Cylinders... Rolling Cylinders... CAMPAIGN PLAN FOR A CREATIVE INDUSTRY EVENT ABOUT ART INDUSTRY: THE PRESENTATION TO BE PREPARED IN REPORT FORMAT Introduction The rolling stone rock band originated from London in the year 1962. The band was inducted in the Rock And Roll Hall Of Fame in the year 1989, ranked by the critical acclaim and popular consensus and critics as the World’s Finest Rock And Roll Band. The band members includes; Ian Stewart, the piano player; Mick Jagger, the vocalist; Keith Richards, the vocalist cum guitarist; Bill Wyman working on bass; and Charlie Watts working on the drum. Jones founded the band yet; Richards and Jagger took over the leadership of the band as they were the bands main songwriters and the subseq...
10 Pages(2500 words)Essay

Rolling Stones the Gangster in the Huddle

...Rolling Cylinders... Rolling Cylinders... writer is trying to describe a classic scenario of a promising athlete’s fall from grace. Aaron Hernandez’s image as portrayed to the audience is that of a young man who had the athletic mentorship needed to succeed at the highest level of America’s premier football league, courtesy of his father, elder brother and later on, professional coaches. However, he comes across successive obstacles, which make his path to legendary status a tough one. The writer attempts to attribute the athlete’s failure to reach the peak of the National Football League (NFL) to the Aaron’s indulgence in substance abuse from his teenage years, subsequent death of his father and the absence of a strong maternal figure in his...
6 Pages(1500 words)Essay


...Rolling Cylinders... Rolling Cylinders... Lab Partner’s Group Number Section Number DD Month YYYY of the Experiment: LAB REPORT: VOLUMES OBJECTIVE SECTION The aim of the experiment was to comprehend the propagation of errors with the help of formulas. The volumes of objects with regular shapes were measured together with graph linearization in order to define the clay’s density. The physics quantities that were measured include Width, Height, and Length of the objects. The aim of determining the density of clay was to practice the propagation of errors and to come up with a linearized graph in determining the quantity if physics. EXPERIMENTAL DATA In the first experiment, the height, thickness, and inner diameter of the hollow cylinder was collect...
4 Pages(1000 words)Lab Report

Thread Rolling

...Rolling Cylinders... Rolling Cylinders... rolling YourFirst YourLast Thread rolling This is the most preferred or best way of preparing of a smooth,precise and strong external threads. This method is much different from any other methods of threading that is cutting and chasing. This method can be performed on a ductile metal. In the process of its forming, many other forms are achieved, for instance, knurls. To arrive at top notch quality threads, the process must be performed in a precision center less ground. Thread rolling can be performed on a wide variety of parts. Rolled threads are produced on wide various parts by the thread rolling. most times, requirements of the rolled threads is by design due to their superiority in the shear, tensi...
2 Pages(500 words)Research Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Lab Report on topic Rolling Cylinders for FREE!

Contact Us