Free

Materials - Essay Example

Comments (0) Cite this document
Summary
We have structure A and structure B. structure A is a 500 slab. This slab is 30 cm thick, so the total volume of the slab is 150. This structure has a tidal zone of San Diego. This is the reason why the structure has…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER97% of users find it useful
Materials
Read TextPreview

Extract of sample "Materials"

MATERIALS FOR CONSTRUCTION Registration Number: In this case, we are going to compare two structures. We have structure A and structure B. structure A is a 500 slab. This slab is 30 cm thick, so the total volume of the slab is 150. This structure has a tidal zone of San Diego. This is the reason why the structure has constructed using quite a strong mixture. On the other hand we have structure B which is a 800 circular column with a thickness of 50 cm. the total volume for this structure is 400. The analysis period for this structure is similar to that of the above structure. This structure is also exposed to the tidal zones of Miami.
The main differences occur in the mixtures that were made and used in the construction of the structures. For structure A, a water concrete ratio of o.4 has been applied while for structure B, water concrete ratio of 0.45 is applied. Structure B applied a higher ratio of water to cement than structure A. This indicates that structure B will be stronger that structure A. In structure B 8% of silica fume is applied. Silica fume enhances strength and durability to the concrete (Yudelson, Jerry). The concrete used for structure B is, therefore highly durable. For structure A, 30% fly ash was mixed with the cement. This may not add as much durability as compared to the addition of silica fume. For structure A epoxy coated rebar is used at 5% volume for reinforcement while structure B applies black steel rebar at 4%. For reinforcement, we can therefore say that structure A is better than structure B. structure A has used 15.5 liters of inhibitor free while structure B has used 10 liters. This indicates that structure A is more protected from corrosion effects than structure B.
According to the results provided, the cost of both structures will be increasing as time goes on but the rate of increase for structure A will be a bit higher than that of structure B. the results indicate that the location of structure A is more stable than that of structure B.
Reference
Yudelson, Jerry. Marketing green buildings guide for engineering, construction and architecture. Lilburn, GA: Fairmont Press ;, 2006. Print. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Materials Essay Example | Topics and Well Written Essays - 250 words - 1”, n.d.)
Materials Essay Example | Topics and Well Written Essays - 250 words - 1. Retrieved from https://studentshare.org/engineering-and-construction/1625110-materials
(Materials Essay Example | Topics and Well Written Essays - 250 Words - 1)
Materials Essay Example | Topics and Well Written Essays - 250 Words - 1. https://studentshare.org/engineering-and-construction/1625110-materials.
“Materials Essay Example | Topics and Well Written Essays - 250 Words - 1”, n.d. https://studentshare.org/engineering-and-construction/1625110-materials.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Materials

Materials

...? Contents Index Pages Material Properties 2 2. Experiment using round piece of mild steel 4 3. Axial Load on rectangular section 6 4. Composite Materials 7 Properties of Materials (#496720) Material Properties 1. Density- Density is defined as the ratio of mass to volume of material. Different materials depending on the type of application used have different densities. For lightweight structures aluminium is used which has a density of 2700kg/m^3. For heavier structures requiring a more robust construction, carbon steels of density 7850kg/m^3 is used. Storage tanks and other structures operating in a corrosive environment would prefer...
10 Pages(2500 words)Assignment

Materials Engineering

...?INVESTIGATING MATERIALS, THEIR PROPERTIES & MECHANISMS OF MATERIAL FAILURE CONTENTS Number Topic Pages Materials and Range of Properties 2 2 Test Procedures For Material Properties 3 3 Manipulative Process Impact on Material Properties and Limitations 4 Bibliography 5 Materials and Range of Properties Materials can be majorly classified in three considerable categories i.e. Metals, Polymers and Ceramics. Metals are of varying types and the applications of metals in the structural and mechanical work are significantly extensive. However on primary basis metals can be classified in to main groups i.e. are ferrous and...
4 Pages(1000 words)Essay

Materials lab

...? Mechanical testing Lab report Introduction. Tension test is considered to be a basic category of mechanical test that can be permed on a material. Such a test is proven to be inexpensive, simple, and extremely standardized. Through pulling on something one will quickly be able to find out how a material can react to different forces that are applied to the tension. When the material is pulled, one would be able to establish the strength of the material. In this regard, tensile testing can help one to develop an insight into various substances. Whenever one continues to pull on a material, the material will break hence one would get a...
3 Pages(750 words)Lab Report

Hazardous Materials

...Running Head: SKIP NAVIGATION LINKS Skip Navigation Links Hazardous materials (HAZMAT) are the materialsthat pose as a threat to the environment or human health if released in large amounts. Incidences related to hazardous materials are normally complex in the public safety industry. Some of the risks that may arise due to the use of hazardous materials are; a fire hazard, an explosion, threat or a chemical gas threat. They occur due to the logistics involved in the response and operations that have to do with the way multiple units function at a scene .The multiple functions involve contraction and expansion as well as due to weather changes. The factors that are used in evaluating...
2 Pages(500 words)Essay

Materials selection

...Dear Sir/Madam: After downloading the CES software 4 times as seen in the screen shot using different laptops to verify the cause of the error in downloading the file from the source: http://www.zshare.net/download/72499933fa26d8ed/, it has been checked and verified that the cause of error is the corrupted file itself. Therefore, in order for me to continue working on the order, I hope we can get another source from which files may not be corrupted. The following is the screen shot of the error message every time an attempt of downloading the files is made from the abovementioned web site address. Thank you so much for reading my letter. Looking forward to hearing from you very soon. Kindest regards, Mark Jim...
10 Pages(2500 words)Essay

Materials Engineering

...Advanced material: Self compacting concrete: Need of this material: Concrete is one of the most fundamental construction materials in the present age. Its use is widespread given the multifarious advantages it offers in comparison to other construction materials as steel or wood. Concrete has been in use for quite a while now but there have always been problems vibrating it in condense reinforcement nets in structural elements. Closely spaced reinforcement bars enclosed in complicated structural elements allow very less room for engineers to run the vibrators between the reinforcement bars in order to ensure that fluid reaches each and every corner of the element being...
10 Pages(2500 words)Essay

Smart Materials

...Smart Materials [The of the will appear here] [The of the will appear here] [The of the Introduction Smart Materials have become increasingly popular in the field of engineering including civil engineering and aeronautical engineering. They are also increasingly popular within the field of bio-chemistry, health care, textile designing and even homeland security. With these materials proving to be quite beneficial in different field, it has become necessary to understand the dynamics of smart materials. Smart materials are considered smart because of their ability to change their properties under external stimuli. These materials are...
5 Pages(1250 words)Essay

Materials

...Chemistry 14 November Materials in Green Cement The largely used construction material globally is Portland cement with an annual production of about 12 billion tones. However, its production utilizes vast amounts of raw materials such as limestone and sand, liberating a ton of carbon dioxide gas per ton of cement produced (Shah & Wang 15). The current focus on sustainable development in concrete technology aims at producing more environmentally friendly cement, which spawns less carbon dioxide and expends less energy. Such environmentally favorable cement is what is referred to as “green cement.” This paper focuses on the advancement of “non-clinker green cement” through the utilization...
1 Pages(250 words)Essay

Materials

...Engineering and Construction Materials Markillie highlights the role of digital transition in the manufacturing sector and the third industrial revolution. Manufacturing tools are undergoing changes in a manner that will transform the nature of work in the sector. Past engineers used drills and moulding machines in manufacturing processes. Current engineers, however, apply automated machines in undertaking manufacturing works. Old machines are no longer applicable in the manufacturing process; automated machines outdo the role of old machines. Markillie emphasizes on the introduction of 3D printers among other new automated set of machines applied in manufacturing (1). 3D printers are efficient and simplifies most...
2 Pages(500 words)Essay

Materials Development

...Life cycle of a carpet i. Suggestions Biological technology is playing vital role in manufacturing of carpet. The innovation can be made at first twostages of carpet life cycle (i.e., Raw materials, processing the raw material). If we just have to educate farmers in the particular context. If farmers would be educated with regard to this technological advancement, we can directly start the life cycle for manufacturing of carpet from third stage (i.e., combine ingredients) and so on. ii. Technological advancement practicing: Researchers have now developed an enzyme-based biological technology that paves the way for manufacturing carpets that are much lighter, sustainable, biodegradable, and 100%...
1 Pages(250 words)Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Essay on topic Materials for FREE!

Contact Us