We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Nobody downloaded yet

Condensing Boilers - Assignment Example

Comments (0)
The house was built in 1910. This means there are brick walls with poor to no insulation. The windows are also old which means that there is a great amount of heat loss through them as well as the passage of cold air into the house in the wintertime…
Download full paper
Condensing Boilers
Read TextPreview

Extract of sample
Condensing Boilers

Download file to see previous pages... These are the key components needed to take into consideration when calculating the heating load and size of the condensing boiler needed for this house. The design conditions for this house in southeast England are fairly neutral. There is a temperature variance throughout the year of 25 degrees Celsius. The temperature goes from, on average, 0 degrees Celsius in January up to around 25 degrees Celsius in the peak months of summer. Rainfall remains pretty constant throughout the year, ranging from 45-80 millimeters a month with the summer averages slightly lower than the winter ones. This house has eight rooms that require heat. The room that will require the greatest amount of heat is the living room. The living room is the largest room in the house and also has two windows which, in the wintertime, will be a major source for heat loss in that room. The bedrooms will not have as high of a demand for heat due to the fact that these rooms are smaller in size as well as one the upper level. Heat rises so they are naturally warmer than the downstairs. Bedroom one and bedroom two would require around the same amount of heat due to the fact that they are approximately the same size, in about the same location within the house, they have the same size windows and doorways, as well as the same number of occupants. The heating requirement for each room will vary based upon the size of the room, the location in the house, the number of windows, and the normal occupancy of the room. We will also need to take into consideration the insulation of the walls, ceiling, floors, and windows. Appliances also emit heat, but they are less trivial factors when compared to the ones stated above....
There have been laws enacted to help reduce the amount of fuel consumed by homes in England for
years now. In 1981 the Energy Conservation Act mandated that certain domestic appliances be labeled
as to their fuel efficiency. In 2000 the Warm Homes and Energy Conservation Act was passed and said
that Parliament will provide assistance to those who are fuel poor and upgarding to more fuel efficient
boilers and other such appliances. The latest and most current is the Energy White Paper (2003). The
Paper describes energy efficiency as "the cheapest, cleanest, and safest way of addressing our energy
policy objectives" (POSTnote, 2005). This Paper, in theory, will have dramatic potential for carbon
savings as well as reduced energy consumption. This Paper describes energy efficiency as the cheapest
and safest way to address our energy policy objectives.
The downfall to reduced costs of fuel with more energy efficient devices is that some people
take the savings as an opportunity to increase their energy usage. If energy is cheaper, then some
people can use more of it. This means that energy efficiency will not always produce reduced
consumption (Wilhite, 2004). The current legislation has helped to raise public awareness of the
problem. Before a lot of the public was unaware and therefore could do nothing to correct it. Now, the
public is made to be conscientious of the problem with the Building regulations and Acts passed within
the last few years.
Part L of the Building Regulations now mandates that any new installation of boilers in England
must consist of condensing boilers, unless there are extenuating circumstances. That is not the case with
the 1910 traditional mid-terrace house, so we ...Download file to see next pagesRead More
Comments (0)
Click to create a comment
Sustainable Operation Management
This ensures that sustainability is achieved hence the needs of the various concerned stakeholders are met. The concepts aim is to conduct sustainable operations management taking into considerations the impact on the environment. With the successful adoption of sustainable operation in processes, all the processes including procurement, delivery are carried out with the need to protect and conserve environment (Appleby 2013).
10 Pages(2500 words)Assignment
Dynamics, Fluids & Energy
It may be in the form of thermal, chemical or electrical energy. Conventional energy relies heavily on the use of fossil fuels to meet this demand. However with the current rate of consumption these energy resources are depleting at a fast pace and man is looking at other alternatives of energy to propel his development.
4 Pages(1000 words)Assignment
Business Decision Making
In order to facilitate this process, several criteria are used in making this decision. These criteria relate to different capital budgeting/investment evaluation techniques. Included among them are: i. The net present value (NPV); ii. The internal rate of return (IRR); iii.
10 Pages(2500 words)Assignment
Construction Engineering
). For calculating the operational feasibility of thermal power plant, following steps will be followed: Uninterruptable supply of fuel to the facility Capable of bearing the entire load for which it is being design. Must not be far away from the market so that if any part needs to be replaced urgently it can be carried out without shutting off the plant for longer times.
6 Pages(1500 words)Assignment
Note taking by condensing Quinn's first nine chapters into notes
The quest for answers led him, strangely, to a Gorilla at a menagerie—who apparently became his wise, sage teacher. The discourse was made in such Socratic process The latter raise questions that
2 Pages(500 words)Assignment
Assessment of physical workload in boiler operations
The boiler activity causes several health problems to the workers including fatigue, psychological problems, and body aches. The aim of the article is to focus on the risks involved in boiler activities, the reasons for the failure of these boiler activities causing health problems, and the ways to improve the process and decrease the risks involved
2 Pages(500 words)Assignment
Assessment of physical workload in boiler operations
Justino et al (1) aimed at quantitatively and qualitatively assessing the burden of physical labour that was experienced by operators of these boilers white at their work stations. In order to achieve the goal of the study aforementioned above Justino et al (3) sample operators
2 Pages(500 words)Assignment
Lighting Design
Lighting design can also take a more sophisticated approach, this will not only consider the luminous intensity, but it will also ensure
2 Pages(500 words)Assignment
Maintenance Management of Engineering Assets
nd moisture in and out of the air present in the room and also control the level of air pollution either by diluting the air pollutants directly or diluting the pollutants to levels that they can be managed (Salsbury & Diamond, 2002). The heating system on the other hand
4 Pages(1000 words)Assignment
These places include the storage tanks that are occasionally entered by employees for maintenance, the huge silos, wells, digesters, boilers among others. In connection to this, the main objective of this article is to
2 Pages(500 words)Assignment
Let us find you another Assignment on topic Condensing Boilers for FREE!
Contact us:
Contact Us Now
FREE Mobile Apps:
  • About StudentShare
  • Testimonials
  • FAQ
  • Blog
  • Free Essays
  • New Essays
  • Essays
  • The Newest Essay Topics
  • Index samples by all dates
Join us:
Contact Us