Contact Us
Sign In / Sign Up for FREE
Go to advanced search...

Engineering science - Speech or Presentation Example

Comments (0) Cite this document
a) Considering the circuit diagram shown, it is clear that the there are resistors connected in parallel and there are those resistors connected in parallel. A parallel circuit is composed of resistors arranged with heads connected together, and the tails connected together…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER95.2% of users find it useful
Engineering science
Read TextPreview

Extract of sample "Engineering science"

Download file to see previous pages Hence for the three resistors in parallel, the effective resistance Rf = 1/7+1/12+1/14= 50/1 68. Flipping this upside down gives 168/50Ω
For the second set of resistors in parallel, their equivalent resistance Rf = 1/16+1/19= 35/304, and flipping this upside down yield 304/35 Ω. The total circuit resistance is found by summing the 304/35 Ω and 168/50Ω. This amounts to 12.0446 Ω.
d) The Pd across each of the two resistors in parallel in parallel is found by subtracting 6.69446V from 24V. This equals to 17.306V. Therefore, using ohms laws, the amount of current through the 19 Ω resistor is V/R= 17.306V/19 = ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(“Engineering science Speech or Presentation Example | Topics and Well Written Essays - 1000 words”, n.d.)
Engineering science Speech or Presentation Example | Topics and Well Written Essays - 1000 words. Retrieved from
(Engineering Science Speech or Presentation Example | Topics and Well Written Essays - 1000 Words)
Engineering Science Speech or Presentation Example | Topics and Well Written Essays - 1000 Words.
“Engineering Science Speech or Presentation Example | Topics and Well Written Essays - 1000 Words”, n.d.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Engineering science

Women in mathematics,Science,and Engineering

...? The role of women in careers which revolve around math, science and engineering has been a central concern of democratic societies around the worldas those societies have attempted to extend social and economic equality. Because math, science, and engineering careers are among the most powerful and lucrative professions in the information age, most advanced governments and societies have believed it important to ensure that women are encouraged to enter those fields and that they have access to the careers in them through proper education and certification. In this paper, the status and role of women in math, science, and engineering in Canada will be reviewed in order to determine how successful one of the most developed... of such...
6 Pages(1500 words)Essay

Women in Mathematics, Science & Engineering

...? Women in Mathematics, Science &Engineering Table of Contents Women in Mathematics, Science &Engineering 1.0 Background 3 2.0 Challenges, issues and opportunities 4 3.0 Strategies to improve women's prospects 6 4.0 Recent imporovements 8 5.0 Conclusion 8 1.0 Background Generally, the field of Mathematics, science and Physics was closed to women for a very long time. However there has been treamendous improvement in terms of participation and contributions of women to the field in the twentieth century. Lewis (2011) documents 10 women who have made contributions to the field of mathematics for as early as 355 AD. These women include Hypatia of Alexandria...
7 Pages(1750 words)Essay

Science-Engineering - Robotic Technology

...Science-Engineering - Robotic Technology I would like to inform you about the progress of my endeavors. It is evident that my Science-Engineering-Technology project has helped me to comprehend the essential engineering concepts. I am focusing on the utilization of robotic technology in schools. By doing this project, I have enhanced my comprehension of the utilization of such processes in schools. The objective of my project was to prove that the technology has been helpful in the current education system (Rueckert & Joaquin 29). To get effective results for my project, I gathered facts gathered by teachers and students of different schools...
4 Pages(1000 words)Essay

Women in mathematics,Science,and Engineering

...Women in Mathematics, Science, and Engineering Women employees with skills in science and technology are an essential resource today, in leading knowledge based economies, such as in the OECD countries. Due to the rapidly growing technology, there is an acute demand for science and technology employees, with the job growth being motivated and driven by an increased number of female employees in this sector. However, women are highly underrepresented in science and technology studies at the secondary and tertiary levels of education, and in the overall technical workforce. This is despite evidence that suggests further involvement of women in technology...
7 Pages(1750 words)Essay

Engineering Science

...Engineering Science Assignment III Compare the actual resonant frequency obtained from the graph with thecalculated value. Using the formula, the calculated value of the resonant frequency is 1/ 6.283 * 10-3 = 159.2 HZ. Due to limitations in the resolution of the measurement equipment, the table indicates a band of frequencies where the maximum current seems to indicate resonance. However, we can approximate the frequency of resonance from the chart by finding the median frequency of the peak current values for each value of R. R=0 Median Frequency = 155 HZ R=500 Median Frequency = 155 HZ R=1000 Median Frequency = 160 HZ R=1500 Median Frequency = 160 HZ The measured values from the table were all within...
8 Pages(2000 words)Research Paper

Science and Engineering

...A Summary on the article 'Taskforce sets up to call for coordinated strategy' A na chnology taskforce recently conducted its first assembly to elevate science and take a shot at convincing the government to pay more attention in making a more rational policy to advance nanotechnology in the United Kingdom says Mediaplanet. Chairman of the taskforce Ian Gibson, former Chairman of the Science Select Committee, and Ravi Silva, co-founder of the taskforce, and Head of the Nano-Electronics Centre at the University of Surrey, have seen the need of the UK to be more updated when it comes to nanotechnology. They believe in its full potential to uplift UK economy. It also offers answers to most of the biggest...
1 Pages(250 words)Book Report/Review

Fire Engineering Science

...and what is the obscuration Solution: As per data given in this example: Intensity of bulb = = 80 W Intensity of light as received by the detector = I = 3 W Distance between the bulb and light detector = length of room = L = 3 m Obscuration = S = S = 96.25 Optical Density of Smoke = D = D = D = D = 14.2 dB Now visibility: (For luminous objects) 5.28m Q3. What is the compression ratio of an engine and why is it useful The working of the Internal Combustion (IC) engine is based on four strokes. 1. Suction or Induction stroke 2. Compression stroke 3. Burn or Power stroke 4. Blow or Exhaust stroke During the above operations, the...
6 Pages(1500 words)Research Paper

The Triangle of forces (Engineering Science)

...The Triangle of Forces (Lab Report) Science Practical Assignment Faculty January 22, 2009 Aim: The aim is to verify experimentally the theorem of the triangle of forces. Introduction: The theorem of the triangle of forces states that “if three forces P, Q, R (See Figure 1) meeting at a point can be represented in magnitude and direction by the three sides of a triangle OB, AO, and BA respectively, taken in order, then the three forces are in equilibrium.” Figure 1: Triangular force diagram In above diagram (figure 1), actually, the converse of the triangle of forces theorem is investigated, that is “ if three forces P, Q, and R meeting at a point are known to be in equilibrium, then their magnitude and directions can be...
2 Pages(500 words)Lab Report

Mechanical Engineering And Science

...innovations to exist. Mechanical engineering refers to a branch of engineering that is responsible for applying the concepts of engineering, material science and physics with the main intention of designing, analyzing, manufacturing and maintenance of mechanical systems. It further involves the production and usage of mechanical power and heat for purposes of designing, producing and operating tools and machines Skills in mechanical engineering have helped to develop vehicles which are an essential component of the transportation industry. Vehicles have played a great role in improving the economy of states, this is mostly because...
6 Pages(1500 words)Research Paper

Engineering electrical circuits and bernoulli science

...1. Principles of fluid flow In this principle, the flow of mass and volume of the fluids measures the amount of fluid moving in a space. Velo measure the fastness of the flow of the fluid. The relationship between the density, volume and the mass is shown in the equation below: Volume = Mass x density Or Q=m / ρ -------------------------------------------------------------- 1 For any volume flow, the speed depends on the pipe cross-sectional area. The link between the volume and the cross sectional area is shown n the equation 2 below. Volume flow (Q) = Velocity (v) * Area (A) Q = vA ----------------------------------------------------------------------2 If the pipe is circular, the velocity is takes as the area (A=π * r2... Principles of ...
4 Pages(1000 words)Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Speech or Presentation on topic Engineering science for FREE!

Contact Us