Download file to see previous pages...
According to Snoman, a microphone, casually referred to as mic or mike, is a device that “converts sound into an electrical current that is then transformed into an audio signal at the end of the chain” (152). How well the sound gets captured by the microphone and un-obstructively reproduced and transmitted to the audience, and how well the microphone meets the live or studio requirements of sound, is the main concern. There is no doubt that when you go for a high quality microphone, you are ultimately ensuring excellence of the sound; however, every microphone has its own tonal quality that is different from other microphones. Thus, choosing the right microphone is what requires good sensible knowledge about the microphone technology and some basic tips and tricks of utilizing this technology.
“Microphones are a key factor in achieving high quality recordings and sound reproduction”, says Peterson. The first microphone ever developed consisted of a metal diaphragm connected to a needle which was further connected to a metal foil. When the diaphragm would catch differences in air pressure, it would cause the needle to move which would scratch out specific patterns onto the metal foil. When these scratches were later run by the needle, they would cause the diaphragm to move which reproduced the recorded sound (How Stuff Works). The latest microphone technology, however sophisticated, works on the same principle that is, converting air pressure waves into electrical current.
Whatever the type of the microphone is, all have one thing is common. That is the diaphragm which is actually a thin paper or a thin piece of aluminum or plastic, located in the head of a typical microphone, and vibrates when it catches sound waves produced by differences in air pressure (see Fig. 1). Vibrations in this diaphragm cause vibrations in other modules of the microphone as well
...Download file to see next pagesRead More
From the onset, technology was created by human beings for their uses and especially to make their work easier. At times, human beings tend to be self-centered and make technological projects that only benefit them, but in general, the aim of human beings always pursuing technology is to make their lives better in general.
Could it be possible, that Internet will next overtake the central place in the living-room currently occupied by TV To answer this question we must look in relations between TV and Internet technologies. This essay discusses the Internet TV technology and the social impact it might bring.
This article will focus on a setting whereby a school principal received a grant of 60 computers. This article will explain the kind of placement of these computers that will prop up student success. This article will also include an account
Technology is always advancing. Therefore, in future, it is expected that technology will be more advanced than it is today. This will thus enhance different areas of life, with regard to efficiency and effectiveness. This
Moreover, there has numerous technologies that have both direct and indirect impacted the life of human beings. One of the numerous technologies that have a direct impact on human beings across the world is the use of mobile phones.
There are several informative books in the market that I would use instead. I would also be able to buy tickets through phone calls in place of the internet.
Technology has changed our culture over the last ten years in several ways. The concept of relationships has
1 Pages(250 words)Essay
GOT A TRICKY QUESTION? RECEIVE AN ANSWER FROM STUDENTS LIKE YOU!
Let us find you another Essay on topic Instrumentation principles for media technology microphone technology for FREE!