StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

First Order Filter: Design and Analysis - Essay Example

Cite this document
Summary
The subject of the paper titled "First Order Filter: Design and Analysis" is an active low pass filter with a gain of 20dB below 10 Hz, 0 dB gain from 160 Hz to 48 kHz, and -20 dB attenuation above 500 kHz. This filter is composed of cascaded components…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.4% of users find it useful
First Order Filter: Design and Analysis
Read Text Preview

Extract of sample "First Order Filter: Design and Analysis"

F I R S T O R D E R F I L T E R D e s i g n a n d A n a l y s i s By HERE] A Report Submitted to the School of Engineering and Built Environment Napier University, Edinburgh in Partial Fulfillment of the Requirements for the Degree of [DEGREE NAME]. November 2008 I N T R O D U C T I O N The word filter refers to the removal of an undesired portion of a frequency spectrum (Carpenter, Roden and Savant; “Electronic Design: Circuits and Systems” 527). Filters are classified, according to technology, into passive and active. Passive filters consist of combinations of resistors, inductors and capacitors. These filters do not depend upon an external power supply thus they are considered passive. Active filters, on the other hand, are implemented using a combination of passive and active (amplifying) components, and require an outside power source. These filters produce gain and usually consist only of resistors, capacitors and operational amplifiers. The most common classes of filters that can either be passive or active are the low pass, high pass, band pass, and band stop filters. Ideal low pass filters allow frequencies up to a given limit to pass and attenuate frequencies above that limit. Ideal high pass filters on the other hand, pass frequencies above a specified limit and attenuate those below. Ideal band pass filters allow only a particular band of frequencies to pass and attenuate the remaining frequencies. Ideal band stop filters are the reverse; this class of filters rejects frequencies within a specified band and passes those frequencies outside it. A filter that is important to note is the universal first order filter. It has a pole and at the same time a zero thus it is also called a bi-linear filter. D E S I G N A N D T H E O R E T I C A L A N A L Y S I S The figure below can be interpreted as first order active filters connected in series. By cascading a 20 dB-gain first order bi-linear filter and another first order bi-linear filter with unity-gain, we can construct a low pass filter whose frequency response is that in Figure 1. When universal filters are cascaded, they form a shaped filter. Figure 1 Filter Specification The analysis of the aforementioned filter is relatively simple. Its transfer function is obtained by multiplying the transfer functions of each of its components: that of the 2 bi-linear filters. It is specified that the output signal MUST NOT BE INVERTED. Notice that the transfer function of a bi-linear filter includes a NEGATIVE sign. When two bi-linear filters are cascaded, this eliminates the negative sign thus there is NO NEED for an inverter. C A L C U L A T I O N S Universal First Order Filter I This filter has a low frequency ( Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Electronic systems Essay Example | Topics and Well Written Essays - 2750 words”, n.d.)
Electronic systems Essay Example | Topics and Well Written Essays - 2750 words. Retrieved from https://studentshare.org/miscellaneous/1549320-electronic-systems
(Electronic Systems Essay Example | Topics and Well Written Essays - 2750 Words)
Electronic Systems Essay Example | Topics and Well Written Essays - 2750 Words. https://studentshare.org/miscellaneous/1549320-electronic-systems.
“Electronic Systems Essay Example | Topics and Well Written Essays - 2750 Words”, n.d. https://studentshare.org/miscellaneous/1549320-electronic-systems.
  • Cited: 0 times

CHECK THESE SAMPLES OF First Order Filter: Design and Analysis

STUDY OF DIGITAL FILTER SHARPENING

The fact of the situation however remains that the engineer is not always privileged to have access to any filter design software at his disposal to enable the reduction of passband ripple or the increment of the stopband attenuation.... Statement of the Problem The problem at hand has to do with the persistent failure in system requirements and specification for working on digital signal processing (DSP) at a time when an engineer may not have access to filter design software to reduce passband ripple or increase stopband attenuation....
21 Pages (5250 words) Dissertation

Design of a Bandpass Fir Digital Filter

The aim of this research work is to design and performance an evaluation of 0.... Scope of workThe scope of this work is to design and develop a finite impulse response bandpass digital filter.... This gave birth to the advanced digital filter design of today ( VolKenberg, 1987).... Signal Noise ratios were evaluated, plotted and comparative analysis was carried out in this paper.... The paper "design of a Bandpass Fir Digital Filter" discusses that generally, the band pass designed will only receive and process signals that are only within the specified limits....
38 Pages (9500 words) Dissertation

Earth Embankment Dam Filters

This study finds that the initiation point is a significant region for a spillway design factor applied in energy debauchery and entrainment forecast associations.... This study intends to consider the design of these filters that makes them perform the listed functions in the current dynamic environmental changes....
6 Pages (1500 words) Essay

EMC Design for Boiler Controller

This article discusses the design of a system for EMC.... The basic EMC directives and the design rules have been discussed.... The paper discusses the concepts related to Electro Magnetic Compatibility like Electro Magnetic Compatibility design principles.... The paper also relates these concepts to the design of a Boiler Controller with five subsystems.... Also, system hardening recommendations has to be proposed for system in case of any discrepancy in the design....
9 Pages (2250 words) Assignment

Modelling Unknown System 2

The AR model is a group of linear prediction formulas that predict the system's output based on the previous outputs that are, to check the linearity of the output There are various design methods of IIR filter used, with the analogue reference prototype filter being the most commonly used method, as it is suitable for the design of low pass filters, high pass, band stop filters and band pass filters.... eference type, analog prototype filter, to be used is specified according to its requirements and specification then there is design of the analog prototype filter....
7 Pages (1750 words) Essay

Engineering Project: Hydratech System

"Engineering Project: Hydratech System" paper describes Hydratech system that applies modern technology of the Novetich techniques, which incorporates low-cost components and dedicated testing and analysis components to provide safe water for drinking and use in household operations.... The projected team decided to improve the operation of the Hydratech system through the integration of intensive bacteria screening systems that significantly restructured the design to obtain optimum levels of performance....
11 Pages (2750 words) Case Study

Design of a Car Suspension System

This work called "design of a Car Suspension System" describes the variation of damping ratio as well as other parameters to see how the signals change.... Matlab has been used to design optimum parameters for the car suspension system.... The findings of this design process indicated that the car suspension system is a low pass filter and it involves small amplitude changes as a result of changes of road surface due to road topography.... he car suspension system should act as a low pass filter because of its ability to reduce vibrations of the car due to road roughness to small amplitude....
6 Pages (1500 words) Assignment

Removing Out Of Band Noise Using Linear Phase Filter

In this case, a simulation will be used by utilizing an FDA (filter design and analysis) in the Matlab toolbox.... The assignment "Removing Out Of Band Noise Using Linear Phase filter" outlines the main features of filters that are one of the essential components in the operation of a majority of electronic circuits and used to emphasize signals within a certain range of frequency and reject some of them in other frequency ranges.... A filter can be described as an electrical network which changes the phase characteristics and or the amplitude of a signal according to frequency....
9 Pages (2250 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us