Plastics and Environmental Sustainability - Case Study Example

Introduction Sustainability is a compliance of the requirement of the current generation devoid of charging the capacity of prospect generation to adhere to their own requirement. The objective of the report is to bring in the notion of recycling plastic which will be stustainable and aid the community, ecologically and economical in the year 2057. The report will focus on the main events commencing from the year 2057 to 2017. Plastics in the United States We are confident that plastic are important resource that must be normally be recovered for their superior as well as best use. The plastic industry associations work with the company has and challenges them to use more recycle product and designs product so that they may be simply recycled and save on the environment. The United States is advancing in technology each year and the year 2057 depicts it. The country has depicted the self-driving cars, drone, holographic television and many more technologies. For a product or material to be truthfully expanded as sustainable, it should be ecologically, economically as well as socially sustainable. These aspects have turn to be understood as the three pillars of sustainability. Plastic make constructive contribution to every three pillars of the sustainability. Plastic makes huge contribution to the ecological sustainability through their energy saving capability and fundamental recycling ability as well as energy upturn alternative (Andrady, 2015). Economically, plastic forms a significant part of the U.S economy and many are exported. Socially, the plastic industry is a key as well as inclusive employer with a focus on training as well as educating. The graph of the change in plastic technology PESTEL Analysis We conducted a pestel Analysis in order to ascertain the dissimilar challenges that might arise and what to focus on with the plastic industry and its effect on the technology. Political Factors considered is the manner to which the government intervene in the economy and extent of their intervention. Political factors entail the tax policies, labour laws, environmental laws. Trade restriction, tariffs and political stability. Political factors might as well entails the good and service that the government need to provide or be provided and those that the government does not to be provided (Campbell-Mohn, 1993). The political aspects affect the ecological policies and regulation and the year 2057 will find many policies to safeguard the environment. This implies that what is produced with regard to plastics should comply with the industrial policy and does not harm the environment. The government may want to provide some thins and so the product should comply with this needs and should company with what the government requires in terms of plastics standards and concern for the environment. Economic The effect of recession must be taken into considerations since, inflation impacts the manner to which the business expands and it might affect production. Considering the economy at the moment and appraising how the economy may affect the cost of plastic production is vital since it might change drastically and might require the production of the plastic product. The plastic will be recycled and save the resource and the environment. Seeing the human development and the many sorts of capital that there is as something significant. The economic transformation and the plastic market are specifically impacted by it since it affects the production as well as expansion of plastic product. Social In guaranteeing plastic product environmental safety, the plastic industries must tray to increase the standard of their plastic product and improving the life of the community. The quality plastic must ensure that the environment is clean by ensuring that the plastic product is recycled and its production does not have negative impact on the lives of people living around. The growth in population across the globe depict a serious challenge, to comprehend the size of the demand of plastics product based on size of population that produce the waste must be taken into consideration. The rate of unemployment is vital, especially with the plastic industry. The reduction in the production of plastic products might lead to reduction the rate of employment since, many of the plastic product will be recycled and production of non-plastic product that environment friendly. Technological The rate of change in technology is growing each year and the quality of plastic backs production must as well improve with regard to the concern for the environment. The change in technology might as well affect the cost that may change the entire project and may pose a threat if it is deem costly. Looking the government spending on plastic technology studies may as well be an aspect to be taken into consideration since it may be helpful with production and invention. The plastic product’s life cycle is an important factor to be taken into consideration since it may affect the quality of the product and its implication on environment. This may give a notion of what the life cycle may be for the product that is under production (Greene, 2014). For the plastic, examining the product life cycle is important and will act as a guideline in producing a quality plastic product that is recyclable Legal It is always vital to take into consideration the legal implication of plastic production that does not the meet certain environmental standards and changes that may be experienced. For instance, the safety of people depict a problem with regards to plastic production since they require an assurance that there health and safety is guaranteed. The diverse legal spectrum might as well impact the cost and may make things costly, more specifically in the technology industry. Environmental Environmental sustainability is focusing on ensuring that the natural resource and preservation of the biodiversity is mandatory in the plastic industry, it is vital to observe this policy since, some production materials used do not benefit the ecology. The plastic production may as well be made with the use of recycle plastics and might be in a position of charging itself. It might as well be in a position o getting energy from the solar panel and energy extracted from the process of recycling the plastics. This implies that there shall be less wastage and engery savings. Timeline 2050 By the year ending 2050, it is estimated the population will be 9.2 billion. This implies that the growth in demand of plastic product and a serious concern for enviroment. Te growth the rate of urbanisation is almost 69% and it is anticipated to growth as the growth in pollution and technology growths each year. This implies more waste and the need for improved recycling and improved environmental policy to save on the environment. The growth in plastic production has been steady from 1964, reaching 311 million tonnes as at 2014. It is anticipated that the rate of plastic production will be twice by the year ending 2050. In sptie of the growth in the demand, merely 5% of the plastic are recycled efficiently whilst 40% ending up in the landfills and the third in fragile ecosystem like the oceans. Many of the plastics are burned which increase the heat earn but leading to fossil fuels being consumed to make new plastic bags, cups, tugs and consumer products (Herriott, 2016).this depict how serious the sustainability with regards to production of plastics product and environmental safety is that serious risk and the need to provide assurance with regard to sustainability. 2040 The overarching vision of the new plastic economy is that plastics are not a waste. Instead, the plastic are re-entering the economy as valuable technical or biological nutrients, the latest plastic economy is underpin by and align with the principle of the circular economy deluding an efficient after-use plastic economy, immensely minimising the leakage of plastic top natural system. Its ambition is to prove ideal wide economic as well as ecological results by creating an efficient after sue plastics economy Recycling Around the World 2030 The recent technologies depicts that the 52% of the plastic products might be recycled economically and ecologically efficiently. Whilst the correct figure might be subject to discussion and is based on the price of oils, the clear communication on sustainability, there are pocket of opportunities to be captured at present and even where not wholly feasible at present, the latest plastic economy provide an appealing target state for the global value chain and the government to innovate towards (Hsiao, 2016). Provide the plastic product is numerous advantages. Both the possibilities as well as the attractiveness of across the board immense minimisation ion the amount of plastic product used are evidently the least. Nonetheless, minimisation just is undertaken where possible and advantageous, by dematerialising, shifting from the single use as a default and replacing with other recycle and environmental friendly materials. 2018 The current plastic product provides the great functional advantages but depict inherent design failures. Its aimed important life is naturally less unlike one year, nevertheless, the material persist for centuries, which specifically harming the environment where there is leakage outside the collection system, as it transpires at present with 3.3% of plastics product. The effort explained above will minimise the leakage, but it is sceptical that the leakage might be eliminated to secure the environment and even a leak of merely 1%, almost a million tones of plastic products may escape the collection system and pile in the natural system each year (Tolinski, 2011). The determined aims may be to develop bio-benign plastic product that may minimise the negative effect on natural system when there is leakage, whilst being biodegradable and aggressive in terms of functionality and expense. The present recyclable plastic seldom sum up to that aspirations since they are naturally compostable just under managed situation like the industrial composter. As a result, further study as well as game changing innovation is required to fully guarantee environmental sustainability compliance with regards to plastic production. Plastic Bags to be ban by 2018 To Summarise The discontinuity of current gathering and sorting frameworks accompanies a few inconveniences: divided after-utilize frameworks cannot be lined up with the plan arrange (most bundling is outlined and created at universal scale and cannot be customized to person districts); natives are befuddled about how plastics ought to be discarded; and framework wide improvement furthermore, economies of scale are deficient. While financial contrasts should be represented to a few degrees, there is plentiful space for frameworks update and joining towards an arrangement of models (Tolinski, 2011). Upgrading frameworks and focalizing towards such all around characterized prime examples inside the Global Plastics Protocol would permit arrangement over the esteem chain. Material and bundling configuration, for instance, could be streamlined for obviously determined sorting offices and reliable marking orchestrated crosswise over districts. This exertion would be correlative to numerous nearby and worldwide endeavors that are centered on working up accumulation and sorting Foundation. It would educate those endeavors at a basic point in their improvement. Bibliography Andrady, A. (2015). Plastics and Environmental Sustainability: Fact and Fiction. New York: JohnnWiley & Son's. Campbell-Mohn, C. (1993). Sustainable Environmental Law: Integrating Natural Resource . new york : pearson Education . Greene, J. (2014). Sustainable Plastics: Environmental Assessments of Biobased. New York: Cengage learning . Herriott, S. (2016). Metrics for Sustainable Business: Measures and Standards. New York: Cengage learning . Hsiao, C. C.-Y. (2016). Sustainable Asset Accumulation and Dynamic Portfolio Decisions. New york: Cengage learning . Tolinski, M. (2011). Plastics and Sustainability: Towards a Peaceful Coexistence. london : pearson Education . Read More