Free

Operation of Circuit Breaker - Essay Example

Add to wishlist

Summary

The paper "Operation of Circuit Breaker" highlights that the high current would cause a metal strip in the circuit to warm up and bend away from the circuit connection causing a break in the circuit. This situation could be reversed and normal operation restored after diagnosing the problem…

Download full paper File format: .doc, available for editing

GRAB THE BEST PAPER97.5% of users find it useful

Read Text Preview

Subject: Environmental Studies
Type: Essay
Level: Masters
Pages: 1 (250 words)
Downloads: 2
Author: rwelch

Extract of sample "Operation of Circuit Breaker"

The turning on of the portable heater in the room and subsequent opening of the room’s circuit breaker and the going off of the lights could be attributed to the high current passing through the heater or the low resistance of the metal strip in the circuit breaker. To understand these postulations, it would be critical to understand the operation of circuit breakers which has been described by El-Sharkawi (31) as a switch that would automatically open when exposed to high current.

In this context, the portable room heater needs to have high resistance to be effective in the emission of heat. As such, a high current would be required for this function.

Similarly, the metal strip in the circuit breaker could be of too low resistance. As such, it fails to contain the flow of current required for the normal operation of the room heater. As such, any slight rise in the current above what sustains the lighting of the bulbs in the room would exceed its resistance threshold, warming up the metal strip causing it to bend away from the circuit and breaking the electric connection and the lights go off.

CHECK THESE SAMPLES OF Operation of Circuit Breaker

Breaker Failure Detection Algorithms

Name: Instructor's name: Course: Date: breaker Failure Detection Algorithms Abstract In a power system world, breaker failure protection became a critical element to provide a back up protection for circuit breakers (CBs).... Thus, the breaker failure relay opens adjacent breakers to isolate the problem.... Fast and secure breaker failure detection algorithm would be a critical challenge facing a numerical BF relay.... In the first part, it presents the need for breaker failure protection....

7 Pages (1750 words) Research Paper

Circuit Protection and Polyphase Motors

This assignment "Circuit Protection and Polyphase Motors" shows that ABCB is used for circuits with voltages higher than 245 kV, where faster operation of the circuit breaker is required.... The air blast circuit breaker (ABCB) is a type of air circuit breaker that works on the principle.... AIR BLAST circuit breaker The Air Blast circuit breaker (ABCB) is used for circuits with voltages higher than 245 KV, where faster operation of the circuit breaker is required....

11 Pages (2750 words) Assignment

Building Services system

The system should serve the general purposes of power in a house including running of two hose reel pumps requiring a total of 2.... kw and a chiller requiring 600A.... These will be the.... ... ... The type of the power system will be a 3-phase system with a 2,400 V voltage.... The system is efficient and observes all the regulations of the relevant authorities including the engineering code of practice....

12 Pages (3000 words) Essay

Vessels Electrical Distribution System

ir circuit breaker or Gas-filled circuit breaker ... ir circuit breaker or SF6 gas circuit breakers interrupt current with a chamber that extinguishes an arc created during an over voltage event.... SF6 circuit breakers can be enclosed in a pressure vessel, referred to as a dead-tank breaker, or open to the atmosphere, also called live-tank circuit breaker.... Circuit breakers have gone through an evolution from the advent of the first oil circuit breaker to today's SF6 puffer style breaker....

17 Pages (4250 words) Term Paper

The Distribution Board Provided

distribution board is defined as “a component of an electricity supply system which divides an electrical power feed into subsidiary circuits, while providing a protective fuse or circuit breaker for each circuit, in a common enclosure.... etering circuit breaker: ... he American National Standards Institute (ANSI) defines a circuit breaker as: “A mechanical switching device, capable of making, carrying and breaking currents under normal circuit conditions....

11 Pages (2750 words) Report

Principle of Operating Electrical Devices

These devices include 24V dc Relay, Submersible Pump, 230V ac Contactor, Rectifier (AC to DC), circuit breaker, and Solenoid valve and ball valve.... These devices include 24V dc Relay, Submersible Pump, 230V ac Contactor, Rectifier (AC to DC), circuit breaker (low voltage 400V ac), and Solenoid valve and ball valve.... The circuit breaker operates when faulty conditions occur in a given circuitry.... The detection of fault is characterized by the opening of the circuit breaker contact sets....

7 Pages (1750 words) Coursework

Electrical Preventive Maintenance and Testing on Circuit Breakers Maintenance

The logarithmic operation characteristics of the over current relay, which supports the tripping Operation of Circuit Breaker, should be analyzed in terms of time and operating current.... A circuit breaker has five basic parts a, trip unit, terminal contacts, operating mechanism, an interrupting structure, a frame to enclose the components.... Most circuit breaker can be observed externally through a window on their compartments.... well maintained circuit breaker should be able to sense and measure current that flows in the circuit....

7 Pages (1750 words) Report

The Principle of Operation of Electrical Circuit Breakers

CBM can be applied to develop and improve some of the following functions: determination of the condition of the individual circuit breaker, assessing the state of circuit breaker and other controls associated with it, optimization of maintenance, and facilitation of CB utilization among other benefits (Jung et al.... The Basic Structure of circuit breaker Monitoring SystemThe Circuit Breaker Monitoring System is made up of server/client architecture with the client part situated in the sub-station....

8 Pages (2000 words) Coursework