The Energy Conservation Opportunities - Assignment Example

Final Assignment Energy conservation opportunities entail using of energy in its minimal capa of energy in a particular organization or a home. Primarily, in definition the abbreviation HVAC means heating ventilation and the so-called air conditioning. It also narrates to the equipment that goes hand in hand with the above issue. Again, it specifies the network involved hence, the terminal used. This combination provide, heating humidity and cooling effect. Solar panel In this study, the energy conservation opportunities will base on the following factors; solar panel, green house, fans, steam, solar stove, bulbs and to crown it all wind is another unforgettable factor (Jean, Hayes, and Anderson 179). Looking at solar energy this is the sun’s energy that undergoes conversion by an n equipment to produce desired power to use as lamps and heat in the school, house, and industries. Other form of energy such as gas and coal comes from fossils, which will not remain available for long. To add on that, this fossils pollutes the air and hence causing harm to human being. Solar energy is clean and readily available furthermore its distinction is not measurable. Bulb This equipment produces light for human being to use. It can be streetlights, house light or even vehicle light. The different types of bulbs include those that save energy and those that use significant amount of energy. Basing to fluorescent ballasts, this bulbs tent to use small amount of energy compare to the other light emitting bulbs. Again this ballast supplements long life and to lamp and cost reasonably. This lamps are wired in parallel thus when one lamp blows off, the other one remains illuminated. This lamp is cheaper to install and use, also does not produce pollution in the environment. Green house A green house is essential in that the plants use up carbon, which in turn produces oxygen that offers good air purification. In implementation, it is cheap since its easier to access it and more cheaper to organize the whole field. These plants are effective to human since they purify the air as well as using the sun making human kind to benefit from the rays. In the end, this leads to energy conservation. Fans In both industrial and commercial buildings, fan is critical in that, it provides a source of cool breeze that gives comfort to workers. This fan is capable of blowing warm air that may be because of hot heat from the machine. This fan has ability to reduce up to 25% of heat produced in the industry. Windmills Wind is essential in the rotation of turbines making it give power for some big machine that are capable of producing electrical power. Its implementation is cheaper and again saves the energy. This wind rotates a big machine that causes the above production. To add on this, wind is essential in the fishing industry where, some manual boats moves by the wind hence conserving fuel. Solar stove This stove uses sun as its source of heat. Material to make this stove, is found locally hence saving the cost of buying a new one for its implementation. This stove is efficient in that, there is no any pollution discharge and so good for human use. The stove can be used anywhere on this planet. Steam The natural steam is very critical. When put into consideration accompanied by special machine, give rise to electric production. This steam comes from within the earth and so can be trapped and be useful. It is cheaper and can easily available. Cannot cause harm to the users. Benefit of the above energy conservation opportunities to the users. In the likes of solar, it is beneficial in that, it provides free and non-toxic solar rays. This ray ensures the users get maximum heat and hence utilize to make electricity. In addition, the use of solar stove is crucial in that it offers replacement of fuel, which is running out. To add on that, sun heat does not pollute the environment. Looking at the bulb, it is beneficial to the user by providing sufficient light and again it is less expensive and available to the user. Furthermore, wind is a natural factor that does not pollute environment and at the same time, enhance power production. This windmill also produces power that move turbine to grind grains. These machines and equipments are usually available to the available immediate users at a low cost. Looking at the overall cost for implementation of these equipments, the equipment itself is somehow costly but the concerned states enhance its availability to the users. For instance to put up a solar panel plant, it is considered the overall power output that will be enough for the purpose it came into existence (Jean, Hayes, and Anderson 304). The cells of solar panel are of silicon and can produce electricity at a cost of about 3 to 6 times above the current price. It is rate 18-30 cents per given kilowatt/hour. Approximation is about $9 per day. Therefore, implementation cost is almost $450, for a small firm. Analyzing the fan, its cost is slightly higher than solar. It is about $750 because the materials used are more expensive and needs technical staff to put up the stand. The implementation cost of windmill, lamp, and steam is $302, $337, and $367 in approximation. Feasibility It entails a thing that is gettable even though it is like difficult or impossible to get. Therefore, the most feasible equipment of the above things is windmill, bulbs, solar stoves, fans, solar panel, and the natural steam. Feasibility is rank according to the availability, cost of implementation and its efficiency. It is clear that steam is not easily put into practice and so that is why it is the last to the list. Conclusion When looking at the whole set of equipments, the key factor is its implementation, and again the ultimate use of the machine is critical. When choosing a reliable machine or equipment, it is better to consider how efficient it is and cost of production not forgetting how harmful or friendly it is to the user. Considering this, it is alarming that the end users are always targeting cheaper things regardless of its durability. But at the end, if the user happens to get long lasting equipment, the better because this will make an entrepreneur to get maximum profit out of it. Lastly, proper research is sees the proper conception of the system hence good and reliable equipment comes out. More to this, implementations of beneficial equipment to the users will automatically rejuvenate. Thus making some of the machine rare and so the useful natural resources can be left without putting into use. Work Cited Jean, Nattkemper, Hayes, Jeri and Anderson, Cathy. Environment & Education. London: Dale Seymour Publications, 2007. Read More