Product Design Development - Microphone Amplifier - Essay Example

Name : xxxxxx Tutor : xxxxxx Title : Product Design Development- Microphone Amplifier Course : xxxxxx Institution : xxxxxx @ 2010 Introduction Product Design & Development- Microphone Amplifier Microphone amplifier is a manufactured item which is a sound preamplifier that consists of high gain channel which are primarily two. The two cannels have both connectors as well as microphone keys with noise characteristics and favorable impedance. (Baxter 1995). The fact that the microphone amplifier has impedance yield being low coupled with current capability of soaring yield; it is an indication that lengthy wires can be used in linking the amplifier and the instruments with the quality of the signal maintained. The development of any design specification for a manufactured item or good such as microphone amplifier which is the subject of our discussion engages the creation of a product (microphone amplifier) which is new in the market or need to be advanced in its performance with the overall aim of being sold by the developers or the business to its customers (Lesley 2002). The designers need to understand that, the designing of the microphone amplifier involves its appeal to the customers and this is through the creation of its look, feel as well as how well it is styled to fit to its target group. The process also involves the selection of the architecture of the product as well as choosing the materials for the microphone amplifier (Baxter 1995). They should also ensure that the components needed for the development of the microphone amplifier are well catered for. The development of the microphone amplifier refers to the procedure of categorizing the opportunities posed by the markets as well as ensuring that the microphone amplifier as a product perfectly appeals the market that has been identified (Lesley 2002). The development process also involves the modification of the product (microphone amplifier) through refining it until it is ready for production. Our process under discussion mainly deals with the development of microphone amplifier which is a discrete product of the engineering sector. It is important to have a clear understanding that the development of the microphone amplifier as an innovative merchandise is very taxing which is coupled with consumption of much time. Most designers and developers who are new in the world of developing new products lack the know-how of how much it is expensive to develop a new product whose creation is time consuming (Lesley 2002).It is important to use the less expensive materials for any product since they help in raising the sales of the product. For instance, iron materials are more expensive to use than it is the case with the aluminum materials. The development of microphone amplifier has undergone tremendous developments since 18th century to 21st century. Such developments could not have been possible if it was done by one person. This is so because a particular individual could not poses all the skills required for the development of the microphone amplifier to function effectively as it does to day (Baxter 1995). It is ironical for an individual to have ability in marketing, packaging design, electronic manufacturing as well as having proficiency in project management and still be proficient. The process of development becomes possible through putting together different talents brought from varying disciplines in the course of the formation of a project team with the help of a leader who leads the team (Lesley 2002). The development cost is constituted by the effort of bringing more people together and conceptualizing the idea in to them to fully refine a product. The notion of any new product to be developed is as a consequence of a chance that has been acknowledged in any market or almost certainly for the detail that there is a new technology that favors the product. When the microphone amplifier is developed as a new product, it is either classified as a market pull product or as a technology push product. When the microphone amplifier is categorized as a market pull, the company that is producing it will have to come up with a marketing strategy that tries to evaluate whether the sales of the microphone amplifier would be increased if it was specifically designed targeting a certain group of customers through appealing them (Lesley 2002). If that is the case, the developers of the microphone amplifier who are engineers are given the task of agreeing on the technical feasibility of the kettle as a new. This process is intercepted with a microphone amplifier which is as a technology push product. The perfect marketing of such a new product in the market will be brought about by shaping on how well technology should be used to bring the maximum demand to the clients. From the above argument, it is clear that the cost estimation of developing the eventual new product is determined by the manufacturing sector and such estimation costs are used in predicting the marked price of the product as well as forecasting the expected profit of the product (Baxter 1995). It is also important to note that the development of microphone amplifier is not the same as developing other products in the market; the process varies significantly with one company to other or even between the new products. For instance, the development of iron box is different from that of microphone amplifier despite the fact that they belong to the same sector. For a product which is new in the market to be good, depends on the methodical development which has good specifications of the product as well as having good defined project goals. The lines of development shown below are essential for the development of microphone amplifier as a market pull product. The first line will be the generic development process of the product. This line is also known as concept development. According to Baxter (1995) this line involves the development concept that includes marketing of the product. There should be a good marketing strategy aimed at maximizing the sales of the new product. Identifying the market segments and correctly defining them to suit their goals. Identifying the products which are likely to compete with the new product is also important. The designers of the new product should have a plan of development with options of the product and how to extend the life of the product (Lesley 2002). There is also the need of coming up with a good marketing plan. Within this line, it is important to develop promotional goals and launch the relevant materials coupling them with field tests. The figure below is an indication of the concept development for a new product such as microphone amplifier. For the product to be highly regarded by the consumers there is the need of identifying their needs. This is usually possible through various ways such conducting interviews to the potential clients or even to the target group. It can also be done through the observation of the similar goods in the market though it might not give the perfect needs of the consumers. The researchers need also to establish the hidden needs of their clients in situations where the customers may lack the necessary knowhow in of certain needs (Lesley 2002). The diagram below represents a typical microphone amplifier. Microphone Amplifier The knowledge garnered by the researchers is good since it helps them to be able to decide the life, size, performance and the influence as well as other provisions of the microphone amplifier. The researchers and the developers of the design have the task of establishing target specifications basing the assumption on the needs of their customers as well as the availability of the competitive products in the market. If there are more products which are competing with the new product, then there is the need to have a keen analysis of the products (Baxter 1995). This is so because some of the competing products usually show some design features which are a success to the competing product hence the need to imitate them. Designers should build up quite a lot of concepts to illustrate the whether the item for consumption is theoretically practicable and whether it will in actual fact rally the products target specifications. On the part of the engineers, they are concerned with developing architecture concepts of the product while the developed designers are concerned with the technique alternatives of the product. Through the appraisal process involving the attributes of the product, the designers are able to come up with a ultimate concept of the product. The second line in developing kettle revolves around design. In this case, the designers need to keenly study the feasibility regarding the concepts of developing the microphone amplifier. At the same time they should also put industrial concepts of design in to their plans as well as developing experimental prototypes of the product (Lesley 2002). They should in addition encompass alternative architectures within their plans. For the product to have a great command in the competitive market, the designers need to define its interface as well as the industrial design. There should also be a good documentation control in place for the designs. In this situation, performance tests are a must if the product has to be reliable in terms of its efficiency. Finally in this line, output volume in the early phases of production need to be well evaluated to determine the progress of the product. The last line in the development of the new product is the line of manufacturing. This line includes cost estimation in the manufacturing sector which is done in connection with the assessment of the production feasibility. It also includes the identification of suppliers. It is the stage at which processes are defined as is the case with design tooling. It is the point when the operations of the production system begin. In conclusion, it is very important to have good plan of executing a products design specifications. By doing so, microphone amplifier will have command a great share of the market hence its competitive advantage. Appraising the product is important since it shows how it is performing in comparison with other products in the market. The industrial designers are frequently concerned with the outset development of the project through their determination to develop a holistic product that appeals many. If the industrial designers create a very attractive concept of developing the project, they unknowingly develop great enthusiasm on the part of the development team which makes them work effectively. If the real concept of developing the product is fully understood by all the members of the development team, the process of development no longer becomes an issue of logic, but instead, results to be a live thing with individual understanding. References 1. Lesley Cresswell, 2002, Product Design: Graphics with Materials Technology Heinemann. 2. Mike Baxter ,1995, Product design: a practical guide to systematic methods of new product Development; Design, rCRC Press, 1995 3. Henry W. Stoll, 1999, Product design methods and practices, CRC Press. 4. Zongmin Ma, 2006 Fuzzy database modeling of imprecise and uncertain engineering information, Birkhäuser. 5. George Q. Huang, and K. L. Mak, 2003. Internet applications in product design and manufacturing Springer. Read More