Contact Us
Sign In / Sign Up for FREE
Go to advanced search...

Association of Consulting Engineering Companies (ACEC), Canada - Research Paper Example

Comments (1) Cite this document
The instructional design document will discuss the learning intervention required by the Association of Consulting Engineering Companies (ACEC), Canada. The design will follow the ADDIE model and all five steps Analysis, Design, Development, Implementation, and Evaluation of the instructional design will conform to the model. …
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER99% of users find it useful
Association of Consulting Engineering Companies (ACEC), Canada
Read TextPreview

Extract of sample "Association of Consulting Engineering Companies (ACEC), Canada"

Download file to see previous pages The sequential approach of ADDIE is also followed by the instructional design document. In first place the ACEC audience will be analyzed for future training needs, the success of the instructional design depends heavily on the accuracy of the needs analysis. This will provide the basis for the design selection which includes the course format and any sub-phases
The second phase begins with instructional needs identified in the analysis part and the design of the instructional design is discussed by the designer. Instructional strategy, course format, and the medium of instruction will also be finalized at this stage. Finally the course will be developed to achieve the desired instructional goals for ACEC, Canada. The instructional plan will ensure the induction of relevant material will keep the course outline as short as possible. Keeping the interest of the audience alive is an important requirement in development phase. The implementation of the instructional design will finalize the plan rollout timings, logistic and availability of resources deemed necessary for the completion of the course. This includes administrative support and availability of training staff to conduct the course. In final phase of the ADDIE model the evaluation of the overall instructional design will be assessed in terms of trainee’s capacity building and company’s objective realization. The quality of evaluation lies in its objectivity and the strength it introduces in the instructional design. ...
Training of newly inducted engineers Analysis of training facilities presently available Coaching facilities for affiliated Companies Instructional facilities for Advance Technologies Lack of Academic Staff Qualitative and Quantitative Needs Required Training facilities (Quantitative) Facilities for Advance Technologies (Qualitative) Needs identified for ACEC All new engineers are required to have comprehensive training before they can be actually deployed at a real life project (Felt Need) Training for advance technologies is mandatory for the Core Professional Engineers at ACEC (Anticipated Need) Association has to plan training for affiliated companies time and again and permanent training need exists under this category (Felt Need) Lack of academic staff (Felt Need) Trainers training (Comparative Need) Selected Need Training of newly inducted engineers Instructional facilities for Advance Technologies Training of Newly Inducted Engineers Need analysis of the ACEC has established a “Felt Need” of providing training to newly inducted engineers in ACEC. The engineers current performance and excellence is satisfactory however it does not match the mission statement for the ACEC, therefore suggests a gap between the existing and desired level of excellence. The need was established after a qualitative interview session conducted with engineers of various domains and was responded by 95% engineers in favor of initial training. Instructional Goal Polishing critical skills in fresh engineering graduates thus enabling them to produce quality engineering models. Performance-Based Objectives A – audience – Fresh Engineering Graduates B – behavior – Skill enhancement C – conditions – ACEC’ Excellence D – Getting quality engineering Models Instructional ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
(“Association of Consulting Engineering Companies (ACEC), Canada Research Paper”, n.d.)
Retrieved from
(Association of Consulting Engineering Companies (ACEC), Canada Research Paper)
“Association of Consulting Engineering Companies (ACEC), Canada Research Paper”, n.d.
  • Cited: 0 times
Comments (1)
Click to create a comment or rate a document
franeckireggie added comment 11 months ago
Student rated this paper as
The topic of "Association of Consulting Engineering Companies (ACEC), Canada" is quite popular among the assignments in high school. Still, this essay opens a new perspective of seeing the question. I’ll use the style for my own text.

CHECK THESE SAMPLES OF Association of Consulting Engineering Companies (ACEC), Canada

Marine Engineering Environment Law and Society

The different types of surveys include an initial survey, renewal survey, intermediate survey, annual survey and additional survey. In the case of ships, weighing less than 400 gross tonnages the survey of engines and equipment for compliance with regulation 13 of this Annex shall be conducted in accordance with the NOx Technical Code. On the aspect of certification, the International Air Pollution Prevention Certificate (IAPP) shall be issued, after an initial or renewal survey in accordance with the provisions of regulation 5 of this Annex. Also, this IAPP Certificate shall be issued for a period specified by the Administration, which shall not exceed five years. Then, the current regulatory references have designated the North...
11 Pages(2750 words)Case Study

Justifying Increased Regulation in Large Companies - Imposing a Strict Regulation on Pharmaceutical Industry

 PPRS continuously provides a stable framework to ensure the publics’ access to affordable new medicines. (Department of Health, 2007) In line with this goal, GSK acknowledges that improvements can be made to the existing pricing scheme.

As a major consumer product, this study will discuss the importance of having a price regulation within the pharmaceutical industry. Several factors that could affect the competition in the branded pharmaceutical market will be elaborate to give us a good insight with regards to the pricing of medicines. In line with the importance of having imposed a price regulated on medicines, the author will discuss the negative effects of not regulating the generic medicines as well as...
11 Pages(2750 words)Case Study

How International Companies Affected by Unwanted Illegal Movements Seek to Minimize the Problems Presented

It describes the idea that the world is becoming a single global market by the integration of markets for goods, services, labor, and capital. It describes the idea that time and space have been shrunk as a result of modern telecommunications technologies which allow almost instantaneous communication between people almost anywhere on the planet. [8] [12]

In terms of numbers, from a nationally biased perspective, that is only taking into account migration across state borders, all main sources give a figure of roughly 175 million migrants worldwide, or 3 percent of the global population. And illegal migration is according to UN figures, the fastest growing form of migration. [7]

Illegal movement is not only r...
7 Pages(1750 words)Term Paper

Analysis of the Case of Hickman v Kent or Romney Marsh Sheepbreeders Association Ltd

There were several basic legal provisions that gave direction to the formation of a company in the United Kingdom. It has its original foundation in 1844 when the Joint Stock Companies Act1 1844 was formulated. It has given regulations for facilitating the formation of companies by "deed of settlement". Gradually, the shareholder concept was initiated in 1855 by the general incorporation procedure in the name of Limited Liability Act2 1855. This has offered limited liability to shareholders and provided identification to the company as a separate legal persona. The doctrine of limited liability postulates that a company shall be liable for the debts that it incurs, and even if it undergoes closure for any grounds, creditors cannot...
6 Pages(1500 words)Case Study

Freedom of Association in the Workplace

As pointed out by O’Connor J, “if the judicial power of the commonwealth is to be effectively exercised by way of conciliation and arbitration in the settlement of industrial disputes, it must be by bringing it to bear on representative bodies standing for groups of workmen….”  The observations made by O’Connor indicate that unions are necessary to redress the inherent power imbalance that exists between employer and employee and to provide effective representation for employees in the resolution of disputes.

Freedom of association under the Australian Workplace Relations Act 1996 provides the freedom to employers, employees as well as independent contractors, to join or not join indu...
6 Pages(1500 words)Term Paper

Civil Engineering Job Sector

The main aim of civil engineering is to make the life of man easy by constructing things like roads that will aid in the transportation of goods and services (Blair, 2007).
Civil engineering started to gain recognition in the United Kingdom in the late 18th and early 19th centuries. There was a foundation of very many professional bodies and societies, for example, the Law and Royal Society. Form the late 18th century a group of people, civil engineers, met regularly thus led to the formation of a society of Civil Engineers in the year 1771. The person behind all the success was John Smeaton. It is known as the Smeatonian Society. This further led to a formation of the institution of Civil Engineers (ICE) whose first presiden...
13 Pages(3250 words)Assignment

Building Engineering Services and Analysis of Core Systems

Finally, we will conduct an in-depth analysis of the heating and insulation systems available in modern homes and propose a strategy to optimize the energy consumption and maximize customer comfort.

Building Service Engineers are usually mechanical or electrical engineers, who do not necessarily have a degree in Building Services Engineering. They start contributing to inputs before the building construction commences. Their assessment starts with researching the suitability of the building site for construction and also foreseeing the provisions to connect services to supply lines. Based on this analysis, they conduct discussions with the client, architects and structural engineers to concur on an installation design t...
13 Pages(3250 words)Report

Organisations in the Engineering and Technology Environment: Singapore Airlines

In those days, just three flights per week, to Kuala Lumpur, Ipoh, and Penang, were all that the people in Singapore were privileged to. There were very fast developments in the situation in a span of two decades. During this period, Singapore’s Kallang Airport gained international exposure and started making huge additions to its fleet. Soon after the birth of the Federation of Malaysia on February 1963, the Malayan Airlines came to be known as the Malaysian Airlines, and in 1966, it was renamed the Malaysian-Singapore Airlines. But, in 1972, fifteen years from the day it was founded, Singapore Airlines split up with Malaysian Airlines and acquired a separate identity.
This split, however, helped the airlines to take i...
10 Pages(2500 words)Case Study

Child Genetic Engineering

Although this is a good move made by medical practitioners, too much use of this technology could end up doing more harm than good both medically and in the society. The process of children's genetic modification is in three steps; advanced reproductive technology, Chromosome manipulation, Genetics and Genomics (Baird 15). The study will relay more information on some of the negative effects that come alongside continuous genetic modification of children.
Studies show that genetic engineering in children plays a number of roles for instance apart from changing possible chronic diseases and disorders, the technique also enables a couple to bear a healthy child that is more athletic and attractive (Baird 15). The topic of genet...
8 Pages(2000 words)Assignment

Should Shoe Companies Be Able to Give away Free Shoes and Equipment to High School Athletes

Today statistics of October 2013,  284,000 high school boys and 209,000 high school girls are playing soccer, 1 million are playing football, and 500,000 are playing basketball (“Youth Sports Statistics”).  These athletes need shoes and equipment, which are expensive.  It is no secret that under current economic condition many families are struggling to pay bills. It is as well not hard to understand that if parents are struggling to pay bills they will not be able to spend funds to pay for the items that their children need to use in sports. In 1906, a non-profit association by the name National Collegiate Athletic Association (NCAA) was formed that now regulates athletes of different institutions inclu...
7 Pages(1750 words)Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Research Paper on topic Association of Consulting Engineering Companies (ACEC), Canada for FREE!

Contact Us