Building Certification - Coursework Example

The fact that this building is a type IIA construction means that the elements of the building have to be fire rated. Here is a summary of my findings and a conclusion later on the certification of this particular building.This load might vary with there being greater concentration at certain areas as compared to other areas. However, a balance is needed and can be created by having adequate means of Egress. Here is my finding on the occupant load of the building.The capacity of Egress components like the main door way capacity as well as the other entrances and exits capacities have to be standard.

This particular building has several exits/entrances. The main entrance is 120 inches wide while the other two side entrances are 72 inches wide each. Occupant load of the whole floor = load of Multipurpose Room + offices + classrooms + shops + lab load capacityThese exits have to be balanced. The table below represents the standard occupant load factor.According to the standards set, the building has good egress as well as occupant load capacity. These are well distributed and the exits are sufficient to cater and allow for efficient evacuation of the building in case of an emergency.

Though there is no automatic sprinkler system, the designs of the hallways as well as their capacity can handle a fire eventuality well. The load capacity of the building is balanced to the different rooms as well as the entrances. With the basic conditions met, there is no reason not to award the certificate. I therefore award a certificate.