StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Life Cycle Analysis of Aircraft Environmental Control Systems - Essay Example

Cite this document
Summary
The paper "Life Cycle Analysis of Aircraft Environmental Control Systems" focuses on the systems that maintenance planners can use to estimate performance/inspection scheduling/cost early in the design and selection phase for this important subsystem…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97% of users find it useful

Extract of sample "Life Cycle Analysis of Aircraft Environmental Control Systems"

Life cycle analysis of the environmental control systems (ECS) is a significant part of the aircraft functioning during flights. In this respect a particular analysis of ECS in terms of design and manufacture, installation on the aircraft, removal for repair at the depot level, and complete replacement from the manufacturer. Thus, the first steps in analysis touch upon the structure and determination of ECS for airframes. Then, it is vital to point out the focal meaning of operating systems and their use for the normal work of civilian airframes, such as Boeing 747 and Airbus A-380. All in all, to delve into the full life cycle analysis of ECS means to incorporate a constructive approach toward estimation of the full life cycle and its applicability as one of the most sign significant subsystems throughout an aircraft. First and foremost, air-conditioning and air-pressurization vary in accordance with the compressor stage at the moment. In this respect different climate factors impact the way the “bleed air” comes in the aircraft during the flight. In this respect the design for usability is taken to make out the functional specificity of all control subsystems in the airframe. That is to say, the relationship between operational requirements maintenance concept, functional analysis and requirements allocation as well as environmental considerations (economical, ecological, political, societal, and technological) points out the full life cycle of the aircraft in its vital control systems (Blanchard & Fabrycky, 2011). Thus, the stage of design and manufacture of ECS sparks interest first. Martinez (2011) draws upon the relationship between ECS and environmental protection systems (EPS) so as to justify the need for an accurate installation of both systems. It is a substantial warrant of security and operational stability of the aircraft. Moreover, ECS design should comply with widely differing temperatures depending on the geographical and atmospheric variety of temperatures, pressures, humidity and the like. Thereupon, a ste of factors, such as kinetic and solar heating, avionics heat loads, airframe system heat loads, the need for cabin conditioning, are to be taken into account by manufacturers (Moir & Seabridge, 2008). It is a predominant to calculate air-cycle process inside the cabin and regarding to the outer factors mentioned above. Figure 1. Air flow inside an aircraft cabin. Recirculation system is, perhaps, one of the main parts of ECS as it is designed with filters having no bypass and controlling gases to low levels due to “high quantities of outside airflow per cubic volume of space” (Hunt, Reid, Space, & Tilton, 2009, p. 5). This is why when installing a specifically designed ECS, the recirculation filters and fans should be checked out precisely. However, on the level of 30,000 feet or more, the pressure factor should also be taken into consideration. It is all about the automatically set outflow valves used to maintain the desired cabin pressure (National Research Council (U.S.); Committee on Air Quality in Passenger Cabins of Commercial Aircraft, 2002). Thus, the life cycle cost depends on the way ECS was used and how it operated throughout the period of direct functioning. In this respect anti-ice system and the recirculation system are the main precursors for further worn-out state of ECS. The thing is that modern ECS re-circulates “up to half of the cabin air…and whilst the ECS fresh air is treated to remove ozone, the recycled cabin air is filtered for many unwanted contaminants, including: 1) micro-organisms; 2) dust; odors; VOC’s” (Seabridge & Morgan, 2010, p. 36). ECS differ in terms of their practical endurance and workability in different outer environments. Based on the example of aircraft Airbus A-380 with its double-deck widebody passenger airliner, the significance of air conditioning grows as the inner space is considered the largest in this huge aircraft. Called an air jumbo in aviation, this airliner has one of the most powerful ECS’s at its disposal. The question is that the A3XX ECS used in A-380 has two double-packs with four air cycle machines and with four stages in each which are 85 percent more powerful than any previous version (Norris & Wagner, 2010). By decreasing the size of the system and decreasing its efficiency the period of ECS exploitation has grown for Airbus and A-380, in particular. The issue of aircraft life cycle as concerned with ECS is that it is reliable but too expensive (1 kW/pax) for airlines based on the example of the two most popular aircrafts (Airbus and Boeing) (Martinez, 2011). Repairing ECS’s on the depot level, the experts constantly face with the heat-exchangers and an extreme change of ram air outlets and inlets. This procedure is costly, but contemporary avionics has yet nothing to do with that. Figure 2. ECS heat-exchanger layout (typical size of each HE is 70.7·0.5·0.3 m3, and 10..15 kg) Hence, by means of a close analysis of ECS, it is vital to keep up with the performance/inspection scheduling early in the design and selection phase for this important subsystem. Thus, the evidences of repair and complete replacement are often. Even though the full life cycle of ECS is supposed to be 5-10 years and usually duplicated or triplicated for safety on modern aircrafts, the period of exploitation requires much efforts in finance and maintenance (Fielding, 1999). Thus, it is all about the variety of subsystems incorporated in ECS. In this vein, Boeing and Airbus are distinguished in following different trends: AIRBUS. For its new born aircraft the A350 XWB, Airbus decided to keep on implementing an engine bleed air driven ECS but combined with advanced engines, the GE GEnx-1A and the RR Trent 1700. BOEING. For its new aircraft, the twin-engine 300 seat B787, Boeing has moved to an all electric ECS (AE-ECS), eliminating any engine bleed (Martinez, 2011, p. 5). These implications state on more electrically-driven suggestions and decisions worked out for contemporary passenger aviation. Pressurization, humidity control, and temperature levels are to be weighed on their relation to other vital flight control systems (FCS). There is an accurate suggestion that “it may be necessary to remove heat from the undercarriage bays, electrical equipment and flying control areas” (Fielding, 1999, p. 74). It is important to make sure there is no threat for the rest of control systems throughout an aircraft on the part of ECS. Once again, it is necessary to bear it in mind that bleed-air supply has two detrimental factors, namely: high pressure and high temperature before bypasses. Thus, the use of pre-coolers is significant after the bleed air with an approximate pressure of 1,170 kPa is extracted from the engine and reduced to 310kPa by pressure regulators (National Research Council (U.S.); Committee on Air Quality in Passenger Cabins of Commercial Aircraft, 2002). Thus, anti-ice systems have to be more efficient in technical functionality. Overall, the life cycle of ECS presupposes the workload of all of its parts and subsystems in terms of functionality and resistance to physical impacts during the flight and while staying at different localities. In this respect the Annual Operating Cost is expressed through the following formula: OC = (EC + LC + PMC + other)N Where EC = annual cost of energy consumed LC = annual cost of operating labor PMC = annual cost of preventive maintenance N = the number of deployed equipment units (Blanchard & Fabrycky, 2011, p. 621). In this respect ECS has to be checked every now and then for its cost-efficiency. Otherwise, there is a problem of high expenditures nevertheless the period of exploitation has not passed yet. Thus, the need for storage springs up eventually. Talking about passenger aircrafts based on the examples of Boeing and Airbus, there are two basic kinds of storage: “temporary storage (storage of products that support short-term replenishment activities) and long-term storage (storage of products in excess of the requirement for normal replenishment in order to build up a buffer or safety stock)” (Blanchard & Fabrycky, 2011, p. 513). These pre-caution measures are vital for regular flights and for supersonic aviation with rare flights in hand. Thus, the life cycle of aircraft ECS depends on the characteristic features of the system itself opposite to the physical and health factors. In this case the use of air control machines, air-conditioning systems, and pressure regulators has to be accomplished with the specific norms and standards of exploitation before, during, and after each flight. With a particular period of the full life cycle in hand, there are different detrimental factors (piping hot and highly-pressured air through ram outlets, filters and fans) which cannot be predicted in a distinctive proportion of time and place where it is about to happen. Thus, aircraft companies such as Boeing and Airbus seek to refuse from solely mechanical ECS’s by changing then into more distributed and electrically-driven systems (Martinez, 2011). Definitely, this trend is applicable for contemporary aviation. With different sources of environmental stimuli, the airborne uninhabited environment should not represent a danger for the airborne inhabited environment (Seabridge & Morgan, 2010). Thus, the issue of aircraft ECS has to be pursued in development. Reference Blanchard, B. S., & Fabrycky, W. J. (2011). Systems Engineering and Analysis (5 ed.). Upper Saddle River, NJ: Prentice Hall. Fielding, J. P. (1999). Introduction to aircraft design. Cambridge: Cambridge University Press. Hunt, E. H., Reid, D. H., Space, D. R., & Tilton, F. E. (2009). Commercial Airliner Environmental Control System: Engineering Aspects of Cabin Air Quality. Retrieved June 29, 2011, from Boeing: http://www.boeing.com/commercial/cabinair/ecs.pdf Martinez, I. (2011). Aircraft Environmental Control. Retrieved June 29, 2011, from UPM: http://webserver.dmt.upm.es/~isidoro/tc3/Aircraft%20ECS.htm#_Toc233109834 Moir, I., & Seabridge, A. (2008). Aircraft systems: mechanical, electrical, and avionics subsystems integration (3 ed.). Hoboken, NJ: John Wiley and Sons. National Research Council (U.S.); Committee on Air Quality in Passenger Cabins of Commercial Aircraft. (2002). The airliner cabin environment and the health of passengers and crew. Washington, DC: National Academies Press. Norris, G., & Wagner, M. (2010). Airbus A380: Superjumbo of the 21st Century. Washington, DC: Zenith Imprint. Seabridge, A., & Morgan, S. (2010). Air Travel and Health: A Systems Perspective. Hoboken, NJ: John Wiley and Sons. Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(Life Cycle Analysis of Aircraft Environmental Control Systems that Research Paper - 1, n.d.)
Life Cycle Analysis of Aircraft Environmental Control Systems that Research Paper - 1. https://studentshare.org/engineering-and-construction/1753684-life-cycle-analysis-of-aircraft-environmental-control-systems-that-maintenance-planners-can-use-to-estimate-performanceinspection-schedulingcost-early-in-the-design-and-selection-phase-for-this-important-subsystem
(Life Cycle Analysis of Aircraft Environmental Control Systems That Research Paper - 1)
Life Cycle Analysis of Aircraft Environmental Control Systems That Research Paper - 1. https://studentshare.org/engineering-and-construction/1753684-life-cycle-analysis-of-aircraft-environmental-control-systems-that-maintenance-planners-can-use-to-estimate-performanceinspection-schedulingcost-early-in-the-design-and-selection-phase-for-this-important-subsystem.
“Life Cycle Analysis of Aircraft Environmental Control Systems That Research Paper - 1”. https://studentshare.org/engineering-and-construction/1753684-life-cycle-analysis-of-aircraft-environmental-control-systems-that-maintenance-planners-can-use-to-estimate-performanceinspection-schedulingcost-early-in-the-design-and-selection-phase-for-this-important-subsystem.
  • Cited: 0 times

CHECK THESE SAMPLES OF Life Cycle Analysis of Aircraft Environmental Control Systems

Aircraft anti-skid System Certification and Regulation

It also maintains steering and aircraft stability in order to control the wheel from skidding which often the cause of aircraft accidents.... The operation of the antiskid systems is generally armed by a switch in the cockpit.... The wheel sensor is used to control and monitor the aircraft movement.... The wheel sensor is used to control and monitor the aircraft movement.... Hydroplaning is the loss of braking control or steering which usually happens when layer of water prevents direct contact between aircraft tires on the runway surface (Ming, et al....
24 Pages (6000 words) Research Paper

Monitoring, tracking, and control technology on aviation industry

Detection of such problems would enable the controllers to re-work on the schedules of the airline systems.... As Yu (1998) in his studies reflected, it is the responsibility of the controllers to detect and manage any irregularities obtained in the operations of the airline systems and thus take the necessary steps and measures such that the normal schedules of the airlines may be obtained.... The return of the airline systems to their normal schedules largely depend on the need and emergency of the schedule....
24 Pages (6000 words) Dissertation

Sustainable Management Futures

Each of these centers is authorized with the power of making their own manufacturing and buying policies relating to the production of different parts of aircraft.... First of all, a rigorous analysis of the political, economic, social, and technological aspects associated with the company will be conducted.... This assignment "Sustainable Management Futures" shows that airbus is one of the leading market players in the global aircraft industry....
16 Pages (4000 words) Assignment

Life Cycle Analysis of Aircraft Environmental Control Systems

life cycle analysis of the environmental control systems (ECS) is a significant part of the aircraft functioning during flights.... life cycle analysis of the environmental control systems (ECS) is a significant part of the aircraft functioning during flights.... All in all, to delve into the full life cycle analysis of ECS means to incorporate a constructive approach toward estimation of the full life cycle and its applicability as one of the most sign significant subsystems throughout an aircraft....
6 Pages (1500 words) Research Paper

Aircraft Accident Investigation

The investigation of aircraft accidents is conducted according to the recommended practice and international standards as laid down in ICAO Annex 13 that pertains to Aircraft accident and incident investigation.... The investigation begins with the search for the details of the airline's data, equipment, people and environmental issues and then moves on to a broad discussion in the investigation process.... The writer of the following paper "aircraft Accident Investigation" seeks to concern the issue of errors and accidents in the aircraft industry....
13 Pages (3250 words) Research Paper

Saving in Aircraft Maintenance Cost

The writer of the paper 'Saving in aircraft Maintenance Cost' states that the airline company can reduce the direct maintenance cost of the aircraft in a trouble-free manner.... The business vision and mission of the company, as well as the nature of the aircraft, determines the strategy that the company will acquire for maintenance of the aircraft.... Every airline needs to maintain aircraft as it is imperative for operating safer flights....
23 Pages (5750 words) Report

Composite Material Failure in Aircraft

This paper ''Composite Material Failure in Aircraft'' tells that Some composite materials used in the construction of aircraft structures started appearing in the late 1930s.... The Diamond materials and construction methods also got to be used for a few aircraft productions.... An entirely new structure construction method was opened up by introducing composite materials within the aircraft industry.... ust like computers, composite fiber use has only spread so rapidly within the aircraft industry....
36 Pages (9000 words) Report

Statement of Requirement for Green Aircraft

reen Aircraft refers to the development of aircraft that mitigate the environmental impacts of aviation.... The main purpose and requirement of green aircraft are to reduce the fuel consumption of aircraft among other issues such as emissions and noise pollution.... Other factors to consider include the financial and product viability in the market and other environmental sustainability showing the technical readiness.... More importantly, such emissions do not meet environmental air quality standards....
18 Pages (4500 words) Case Study
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us