Nobody downloaded yet

Electric Wheel Chair Training Method - Essay Example

Comments (0) Cite this document
Summary
In order for effective training in organizations, the trainers require to be equipped with presentation tips that will enable them to deliver the message successfully to their targeted audience. The methods used differ from trainer to trainer depending on the nature and the…
Download full paperFile format: .doc, available for editing
GRAB THE BEST PAPER98.9% of users find it useful

Extract of sample "Electric Wheel Chair Training Method"

Download file to see previous pages When addressing the history of the organization, the voice should be audible to the audience to aid understanding by the audience. On the other hand, confidence is a fundamental aspect when handling orientation to company policies. Self-belief is a significant presentation skill when orienting new employees in the organization. Confidence gives the audience the hope that the trainer is outlining the organization guidelines; the self-assurance portrayed by the trainer play a great role in the understanding of the audience. During the orientation to company rules, confidence should be displayed by the trainer. This helps in laying a firm foundation to the new employees on the issue of the company rules and regulation (TimeToMarket, 2014).
In order for a trainer to be able to handle the manufacturing plant and the safety protocols, the trainer requires to have the presentation skill to maintain eye contact with their audience. For instance, by maintaining the eye contact with preferred spectators, the new employees become very serious because they tend to think that the trainer is keen on them. In addition, by attaining the trainee attention, the trainer can tackle the manufacturing procedures, which are followed during the production of products. Moreover, having the attention of the trainees, the trainer can point out the safety precaution to be adhered to while in the organization location. However, when training new members on the different parts of the electric wheelchair parts, the presentation pace should be relatively slow. In this context, the instructor should ensure that the pace of explaining and showing the sections is a bit slower. In this regard, the trainees can understand every section that is explained to them. In the same context, the coach should ensure that their speed is neither too fast nor too slow; this enhances the perceptive comprehending of the ...Download file to see next pagesRead More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Electric Wheel Chair Training Method Essay Example | Topics and Well Written Essays - 750 words”, n.d.)
Electric Wheel Chair Training Method Essay Example | Topics and Well Written Essays - 750 words. Retrieved from https://studentshare.org/human-resources/1653858-electric-wheel-chair-training-method
(Electric Wheel Chair Training Method Essay Example | Topics and Well Written Essays - 750 Words)
Electric Wheel Chair Training Method Essay Example | Topics and Well Written Essays - 750 Words. https://studentshare.org/human-resources/1653858-electric-wheel-chair-training-method.
“Electric Wheel Chair Training Method Essay Example | Topics and Well Written Essays - 750 Words”, n.d. https://studentshare.org/human-resources/1653858-electric-wheel-chair-training-method.
  • Cited: 0 times
Comments (0)
Click to create a comment or rate a document

CHECK THESE SAMPLES OF Electric Wheel Chair Training Method

Four wheel steering Vs Front wheel Steering

...Introduction Typical vehicle models for 4WS (four wheel steering) are composed of steering as well as roll motion, drive train and tyre dynamics.Some models for vehicles are modelled along the 2 DOF (degrees of freedom) bicycle model but such models fail to compensate for roll angle modelling and only relate lateral acceleration and yaw rates. The current constraints for relating lateral acceleration, yaw rate and roll angle necessitate the use of a 3 DOF system. A 3 DOF system using the required dynamics and motions was used. The following properties have been assumed in order to deal with the vehicle’s dynamics: 1. The vehicle is symmetrical about the x-z axis; 2. The vehicle’s total mass  is lumped;...
12 Pages(3000 words)Assignment

Water Wheel: History and Mechanism

...? Water Wheel: history and mechanism Water Wheel is one of the most useful inventions of the ancient times and served as a revolutionary machine for the development of hydraulics and also agriculture. The working of a water wheel is based on the two fundamental principles of physics i.e. gravity and impulse. Water wheel finds various applications in agriculture and engineering during the ancient times and various new machines are based on the principle of water wheel. Water Wheel: history and mechanism History of Water Wheel: Primary movers, like the water wheel, have been regarded by some historians as the significant element in the evolution of technology. Invented in Hellenistic era, it was a critical juncture in the history... of...
4 Pages(1000 words)Research Paper

Electric City

.... It took about 2 hours. This means the locomotive moved at speed of about 4.5mph. Preceding the steam train, in 1769, the first self-propelled vehicle, a military tractor was invented by a French engineer/mechanic, Nicolas Joseph Cugnot. Cugnot used a steam engine to power his vehicle, built under his instructions at the Paris Arsenal by mechanic Brezin. It was used by the French Army to haul artillery at a then whooping speed of 21/2mph on only three wheels. Cugnot also crashed his vehicle in to a wall making him the first road vehicular accident causality. That accident was the beginning of his troubles as his financiers were also not forthcoming any longer with aid. Several work and revision was made...
2 Pages(500 words)Essay

Wheel Centre Manufacturing

...Resume The fabrication of the wheel centre through machining process is complicated task. However the fabrication of the wheel centre through castingis relatively simple. The fabrication of the die is however a major challenge, but it is recommended that the die shall be designed with certain margins, and the end product through casting shall be machined to edit such tolerances. The fabrication of the die for such job is possible through Computer Numerical Control machines; however it is important to understand that design should incorporate sufficient margins which shall be later addressed through machining. The wheel centre is crucial job piece, as it includes cutting at certain...
2 Pages(500 words)Essay

Method

...2. Materials and Methods 2 Materials 2 1 Consumables Consumables were purchased from different suppliers. Petri dishes were from Sarsedt, Falcon tubes were bought from VWR International, and ethanol came from Fisher Scientific. 2.1.2 Equipment The equipments used throughout the duration of this experiment are listed in Table 1. Table 1. List of equipment used in the performance of the study. Item Model Supplier WM/250/sclp Rsons Mixture? Water bath OLS200 Grant Centrifuge 3-18 Sigma Incubator-shaker Excella E25 New Brunswick Scientific Balance S1-64 Denver Autoclave Rodwell 2.2 Solutions 2.2.1 Buffers 2.2.1.1 Phosphate buffer saline Phosphate buffer saline tablets (Oxoid Limited) were dissolved in distilled water...
8 Pages(2000 words)Essay

Lincoln Electric

...Lincoln Electric case study Q1: Lincoln Electric follows a hierarchical management system. In a hierarchical system, there is a strict distinction between the different levels of management within the organization, with each level or hierarchy concerned with the functioning of that level only (Armstrong, 2006). The power and responsibilities associated with the management of the organization converge from the workers upward toward the president or executives of the company (Armstrong, 2006), so that the workers are at the lowest stratum and the president or the managing executives at the highest stratum (Lincoln Electric, 2010). This holds true... for ...
2 Pages(500 words)Essay

Business planning-ECO-CHAIR

...Introduction to Made in Brunel Project The business plan is regarding a product, Ecochair, which is one of Made in Brunel Projects. The product was designed to meet the needs of outdoor setting chair. It is made of organic and green material, and is complete with vegetable glues. It is a recycled product that is printed on soya inks. These inks are environmental friendly. The best aspect of this product are the four unique parts of Ecoboard which are flat packed to provide easy transport. The business plan aspires to cash in on environmental friendly products and using them to offer utility to people’s daily life. In order to pursue this business project a private limited company will be launching this product and...
5 Pages(1250 words)Assignment

Business Planning- ECO chair

...Business Planning- ECO chair Introduction The aim of this group business plan was to produce a new innovative product idea that demonstrates the knowledge and understanding of the key aspects that should be included in a business plan. According to Blois (2009, p.99), the business plan involved making an Echo chair designed to meet the demand for outdoor sitting. The product concept involved the use of recyclable and environmentally materials such as vegetable glue to make joints and soya inks for decoration. This product development puts the concept of environmental sustainable in mind and this will make it an attractive investment for investors who might consider buying the idea in future. The group...
5 Pages(1250 words)Assignment

METHOD

...Method: Method Participants The participants of the research study will be from The Ark which is located in the South East region of Miami. The Ark University is a public institution with a total population of approximately 24, 500 students. A group of 60 educational graduates students, 30 male and 30 female. These students will participate in the experimental study to assess the impact of online classes and traditional classes. The participants will be informed that the experiment will measure how they captured concepts of the materials used in the class. The students to participate in the study will be asked to volunteer. The students who volunteer will be selected randomly using a computer generator to...
4 Pages(1000 words)Essay

Career Wheel

... CAREER OPPORTUNITIES Finance Industry Finance and banking in the United s have had a profound history of expansion and diversification. After the Second World War, measures were enacted to lift the country back to its feet economically and stabilize the financial system. The glass-steagall act was implemented and it is best remembered for the permanent separation it imposed between commercial banking and investment banking. By 2005, the banking industry had employed over two million salaried workers making it the largest industry in the financial services sector (Fitch). The finance industry is divided into two categories namely; consumer finance companies and diversified financial services companies. Almost every organization... CAREER...
3 Pages(750 words)Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.

Let us find you another Essay on topic Electric Wheel Chair Training Method for FREE!

Contact Us